{"product_id":"shurflo-244-3366-1-2-in-npt-90-degree-swivel-fitting","title":"Shurflo 244-3366 1\/2 in NPT 90-Degree Swivel Fitting","description":"\u003cp class=\"nvn-hero\"\u003eThe Shurflo 244-3366 is a nylon 90-degree swivel elbow for fresh water plumbing on your boat or RV. A 1\/2 inch-14 female NPT inlet and male NPT outlet let it turn a corner right at the pump, and the wingnut swivel body snugs down hand-tight with no wrench needed.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Shurflo 244-3366 is a nylon 90-degree swivel fitting built for the fresh water plumbing on your boat or RV. One end is a 1\/2 inch-14 female NPT inlet, the other is a 1\/2 inch-14 male NPT outlet, and the wingnut swivel body lets you turn a corner right at the pump or the tank without fighting the hose. It's a small part that solves a real problem, getting a clean 90-degree turn in a tight bay without kinking a line or cross-threading a port.\u003c\/p\u003e\n\u003cp\u003eIf you've ever tried to route fresh water line off a demand pump that sits flush against a bulkhead, you know the trouble. A straight connection forces the hose into a hard bend the second it leaves the port, and that bend is where lines kink and flow drops off. This elbow takes the turn for you. It threads into a 1\/2 inch NPT female port, and the male NPT outlet gives you a standard pipe thread to carry on to the next fitting, a shutoff valve, or an accumulator tank.\u003c\/p\u003e\n\u003cp\u003eThe wingnut swivel is the part most boaters appreciate. You start the thread by hand, then snug it down with the molded wings, no wrench needed in a cramped locker. Because the body swivels on the inlet, you can orient the outlet exactly where you want it to point and then tighten without the whole fitting winding your hose around with it. That matters when you're working one-handed under a galley sink or behind a water heater where there's barely room for your knuckles.\u003c\/p\u003e\n\u003cp\u003eIt's molded from nylon, so it won't corrode the way a plated metal fitting can in a damp bilge or a salt-air locker. Nylon also keeps the weight down and won't gall the threads on a plastic pump housing, which is exactly what you want when the port you're threading into is also plastic. For cold fresh water work, pump outlets, city-water inlets, winterizing bypass lines, it does the job and stays put season after season.\u003c\/p\u003e\n\u003cp\u003eOne thing worth knowing about NPT fittings in general, the threads are tapered, so they seal on the threads themselves rather than on a flat face or an O-ring. That's why the tape matters and why you tighten to a firm feel, not to a hard stop. A turn or two past hand-tight on the male end is usually plenty for a leak-free fresh water seal.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward. Wrap the male NPT threads with a couple of turns of PTFE tape, thread the female end onto the pump port, orient the outlet where you need it, and snug the wingnut by hand. Don't over-torque it. Nylon threads seat firmly without much muscle, and cranking on them is how you crack a fitting or strip a thread. If you feel resistance early, back it out and start again rather than forcing a cross-thread.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes before you order. This is a 1\/2 inch-14 NPT fitting on both ends, female in and male out, so it's made for standard pipe-thread connections, not a direct push onto a bare hose. If your run needs a barbed hose tail, you'll add that fitting downstream of the male outlet. And it's rated for fresh cold water systems only. Keep it off fuel lines and hot process plumbing.\u003c\/p\u003e\n\u003cp\u003eIt's sold as a single fitting. Honestly, it's the kind of part worth keeping two of in the spares bin, because the day a pump swap goes sideways in a marina slip is the day you'll wish you had a spare elbow already aboard. At this price, stashing a backup is easy insurance against a dry tank and a long walk to the parts store.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e90-degree elbow body turns fresh water line right at the pump or tank port without kinking the hose in a tight bay\u003c\/li\u003e\n  \u003cli\u003e1\/2 inch-14 female NPT inlet threads onto a standard demand pump port\u003c\/li\u003e\n  \u003cli\u003e1\/2 inch-14 male NPT outlet carries on to the next fitting, shutoff valve, or accumulator with standard pipe thread\u003c\/li\u003e\n  \u003cli\u003eWingnut swivel body tightens hand-firm with no wrench, so you can install it one-handed in a cramped locker\u003c\/li\u003e\n  \u003cli\u003eSwivel design lets you aim the outlet exactly where you want it before you snug it down\u003c\/li\u003e\n  \u003cli\u003eMolded nylon construction won't corrode in a damp bilge or a salt-air locker\u003c\/li\u003e\n  \u003cli\u003eLightweight nylon threads won't gall a plastic pump housing\u003c\/li\u003e\n  \u003cli\u003eSold as a single fitting for fresh cold-water plumbing, pump outlets, and city-water inlets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Shurflo by Pentair reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size are the threads on the Shurflo 244-3366?\u003c\/summary\u003e\n    \u003cp\u003eBoth ends are 1\/2 inch-14 NPT. The inlet is a 1\/2 inch-14 female NPT and the outlet is a 1\/2 inch-14 male NPT, so it bridges two standard pipe-thread connections.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a straight fitting or an elbow?\u003c\/summary\u003e\n    \u003cp\u003eIt's a 90-degree elbow. It's built to turn fresh water line around a corner right at the pump or tank port instead of forcing the hose into a hard bend.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need tools to install it?\u003c\/summary\u003e\n    \u003cp\u003eNo. The wingnut swivel body is made for hand-tight installation. Start the thread by hand, orient the outlet, and snug it down with the molded wings. Add a couple turns of PTFE tape to the male threads for a clean seal.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is it made of?\u003c\/summary\u003e\n    \u003cp\u003eNylon. It won't corrode in a damp bilge or salt-air locker, keeps weight down, and won't gall the threads on a plastic pump housing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it for hot water or fuel?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's built for fresh cold-water systems only. Keep it off fuel lines and hot process plumbing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it connect directly to a hose?\u003c\/summary\u003e\n    \u003cp\u003eNot by itself. Both ends are NPT pipe thread, female in and male out. If you need a barbed hose tail, add that fitting downstream of the male outlet.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the swivel actually help during installation?\u003c\/summary\u003e\n    \u003cp\u003eYes. Because the body swivels, you can point the outlet exactly where you want it and then tighten without winding the hose around with the fitting. That's a real help one-handed under a sink.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many fittings come in the package?\u003c\/summary\u003e\n    \u003cp\u003eOne. It's sold as a single fitting.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eShurflo 244-3366 Nylon 90-Degree Swivel Water Fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eShurflo by Pentair\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e244-3366\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e752324011117\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInlet Connection\u003c\/th\u003e\n\u003ctd\u003e1\/2 inch-14 Female NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutlet Connection\u003c\/th\u003e\n\u003ctd\u003e1\/2 inch-14 Male NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eThread Size\u003c\/th\u003e\n\u003ctd\u003e1\/2 inch-14 NPT (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e90-Degree Elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSwivel Type\u003c\/th\u003e\n\u003ctd\u003eWingnut Swivel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eTool-Free, Hand-Tight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eFresh Water Hose End Fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWater System\u003c\/th\u003e\n\u003ctd\u003eFresh Cold Water\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size are the threads on the Shurflo 244-3366?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Both ends are 1\/2 inch-14 NPT. The inlet is a 1\/2 inch-14 female NPT and the outlet is a 1\/2 inch-14 male NPT, so it bridges two standard pipe-thread connections.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a straight fitting or an elbow?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a 90-degree elbow. It's built to turn fresh water line around a corner right at the pump or tank port instead of forcing the hose into a hard bend.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need tools to install it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The wingnut swivel body is made for hand-tight installation. Start the thread by hand, orient the outlet, and snug it down with the molded wings. Add a couple turns of PTFE tape to the male threads for a clean seal.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is it made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Nylon. It won't corrode in a damp bilge or salt-air locker, keeps weight down, and won't gall the threads on a plastic pump housing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it for hot water or fuel?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's built for fresh cold-water systems only. Keep it off fuel lines and hot process plumbing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it connect directly to a hose?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Not by itself. Both ends are NPT pipe thread, female in and male out. If you need a barbed hose tail, add that fitting downstream of the male outlet.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the swivel actually help during installation?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Because the body swivels, you can point the outlet exactly where you want it and then tighten without winding the hose around with the fitting. That's a real help one-handed under a sink.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many fittings come in the package?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"One. It's sold as a single fitting.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Shurflo by Pentair","offers":[{"title":"Default Title","offer_id":67600038527069,"sku":"2011221","price":7.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_25a7ed4c-1e6b-46d8-bbc6-1bf040f582d4.jpg?v=1790981794","url":"https:\/\/nvnmarine.com\/products\/shurflo-244-3366-1-2-in-npt-90-degree-swivel-fitting","provider":"NVN Marine","version":"1.0","type":"link"}