{"product_id":"seaview-sv4400r-railpod-un-cut-chartplotter-mount","title":"Seaview SV4400R RailPod Un-Cut Chartplotter and MFD Rail Mount","description":"\u003cp class=\"nvn-hero\"\u003eThe Seaview SV4400R RailPod gives a 7 to 9 inch chartplotter or multifunction display a clean, rail-mounted home at the helm. It ships un-cut, so you trim the acrylic-capped ABS face to fit your exact screen for a flush, factory look. A single stainless clamp grabs 1 inch to 1-1\/4 inch rails. Solid, boat-ready mounting without cutting up your console.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Seaview SV4400R is a RailPod, a rail-mounted pod that gives a chartplotter or multifunction display a solid, purpose-built home up at the helm. Instead of cutting into your console or cluttering the dash, you clamp this pod onto a rail and mount the screen right where you can see it. The usable face measures 8-3\/4 inches wide by 6 inches tall, which leaves room for most 7 to 9 inch displays. It's a clean answer to the age-old problem of where to put the plotter on a boat that wasn't built with a spot for it.\u003c\/p\u003e\n\u003cp\u003eHere's the key thing to understand about this one. It ships un-cut. The acrylic-capped ABS face is a blank, with no pre-made opening. You cut the cutout yourself to match the exact footprint of your display. That sounds like more work, and it is a little, but it's also why the finished install looks so clean. A pre-cut pod only fits one specific unit. An un-cut pod fits whatever you're running, and you get a tight, flush bezel line around the screen instead of a generic hole with gaps around it.\u003c\/p\u003e\n\u003cp\u003eThe pod grabs the rail with a single base clamp, and that clamp fits all the common rail sizes, 1 inch, 1-1\/8 inch, and 1-1\/4 inch outside diameters. The clamp hardware is stainless steel, so it stands up to salt and spray without streaking rust down your gelcoat. Overall the pod is compact, 10.77 inches wide, 5.62 inches deep, and 7.38 inches tall, so it tucks onto a rail without hogging space or blocking your sightline forward.\u003c\/p\u003e\n\u003cp\u003eOn the cutting itself, take it slow. Mark your display's cutout using the template that came with your screen, or trace the bezel and step in for the flange. A fine-tooth jigsaw blade or a rotary tool cuts acrylic-capped ABS cleanly. Go easy so you don't chip the acrylic cap, then knock the edges down with a file or fine sandpaper for a finished look. Dry-fit the display before you drill the mounting holes. This is the one step worth not rushing, because the cut is what separates a sharp install from a sloppy one.\u003c\/p\u003e\n\u003cp\u003eWe've rigged a fair number of these, so here are a few field notes. Budget about 45 minutes for a clean install on an aluminum rail, not counting the time to cut the face. Hit the stainless clamp threads with a dab of anti-seize before you torque them down. It makes the next teardown painless and keeps the hardware from galling. If your rail is on the smaller end of the range, a wrap of rubber or a thin shim under the clamp takes up the slack and kills any wobble in chop. The single clamp is plenty steady for a lighter 7 to 9 inch display. If you're hanging something big and heavy off it, plan on a second support point so you're not relying on one clamp to fight vibration at speed.\u003c\/p\u003e\n\u003cp\u003eWhere does it shine? Center consoles with a grab rail, sailboats with pedestal guard rails, and any boat where console space is tight but you've got tubing to work with. It puts the screen at eye level, keeps it out of standing water in the sole, and lets you angle the whole pod on the rail to kill glare. The white finish blends with most gelcoat and hardtops. And because it's Seaview, the plastic is the good stuff, acrylic-capped ABS built to take UV and weather season after season.\u003c\/p\u003e\n\u003cp\u003eOne honest note. This is a mounting pod, not the display and not the wiring. You'll still run power and any network cable to the screen, and you'll supply the fasteners that hold your specific display to the cut face. But for getting a chartplotter mounted right, at the right height, on a rail, without butchering your console, the SV4400R is a clean, boat-proven way to do it.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eUsable face measures 8-3\/4 in. wide by 6 in. tall, sized for most 7 to 9 inch chartplotters and multifunction displays\u003c\/li\u003e\n  \u003cli\u003eShips un-cut so you trim the face to your exact display for a flush, factory-look bezel line\u003c\/li\u003e\n  \u003cli\u003eSingle base rail clamp fits all standard rail diameters: 1 in., 1-1\/8 in., and 1-1\/4 in.\u003c\/li\u003e\n  \u003cli\u003eStainless steel clamp hardware resists salt and spray without rusting or streaking gelcoat\u003c\/li\u003e\n  \u003cli\u003eCompact overall footprint of 10.77 in. wide by 5.62 in. deep by 7.38 in. tall keeps sightlines clear\u003c\/li\u003e\n  \u003cli\u003eAcrylic-capped ABS construction stands up to UV and weather season after season\u003c\/li\u003e\n  \u003cli\u003eWhite finish blends with most gelcoat, hardtops, and console trim\u003c\/li\u003e\n  \u003cli\u003eRail mounting puts the screen at eye level and frees up crowded console space\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Seaview reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does un-cut mean on this RailPod?\u003c\/summary\u003e\n    \u003cp\u003eIt means the face ships as a blank with no pre-made opening. You cut the cutout yourself to match your exact display, which gives you a tight, flush fit around the screen instead of a generic hole. It's a little more work up front, but the finished look is worth it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size display fits the face?\u003c\/summary\u003e\n    \u003cp\u003eThe usable face is 8-3\/4 inches wide by 6 inches tall. That's sized for most 7 to 9 inch chartplotters and multifunction displays. Check your unit's cutout dimensions against that face before you order.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat rail sizes does the clamp fit?\u003c\/summary\u003e\n    \u003cp\u003eThe single base clamp fits all the standard rail diameters, 1 inch, 1-1\/8 inch, and 1-1\/4 inch outside diameter. If your rail is on the smaller end, a rubber shim under the clamp takes up any slack.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the mounting hardware corrosion resistant?\u003c\/summary\u003e\n    \u003cp\u003eYes. The clamp is stainless steel, so it holds up to salt and spray without rusting or streaking your gelcoat. We'd still add a touch of anti-seize on the threads before final torque to keep them from galling.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I cut the face to fit my screen?\u003c\/summary\u003e\n    \u003cp\u003eUse your display's cutout template, or trace the bezel and step in for the flange. A fine-tooth jigsaw or rotary tool cuts the acrylic-capped ABS cleanly. Go slow so you don't chip the acrylic cap, then dress the edges with fine sandpaper and dry-fit before you drill.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long does the install take?\u003c\/summary\u003e\n    \u003cp\u003eFigure about 45 minutes on a clean aluminum rail, not counting the time to cut the face for your specific display. Powder-coated rails take a little extra care to align the clamp squarely.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill a single clamp hold the display steady?\u003c\/summary\u003e\n    \u003cp\u003eFor a lighter 7 to 9 inch display, the single base clamp is plenty steady. If you're mounting something larger and heavier, plan on adding a second support point so one clamp isn't fighting vibration at speed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the overall dimensions?\u003c\/summary\u003e\n    \u003cp\u003eThe pod is 10.77 inches wide, 5.62 inches deep, and 7.38 inches tall overall. Check that 7.38 inch height against your console and any bimini or hardtop frame so the pod clears when you swing it on the rail.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's it made of and how does it hold up outside?\u003c\/summary\u003e\n    \u003cp\u003eIt's acrylic-capped ABS plastic in white, the same material Seaview uses across its pods. The acrylic cap gives it a hard, weather-facing surface built to take UV and salt air season after season.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the display come with it?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is the mounting pod only. You supply the chartplotter or multifunction display, run its power and network cabling, and use the fasteners that hold your unit to the cut face. The rail clamp and stainless hardware to attach the pod to the rail are included.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eSeaview SV4400R RailPod Un-Cut, 8.75 Inch Usable Face\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSeaview\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eSV4400R\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e850073256411\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eRailPod (Un-Cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eChartplotter \/ Multifunction Display Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAcrylic-Capped ABS Plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUsable Face Dimension\u003c\/th\u003e\n\u003ctd\u003e8-3\/4 in. W x 6 in. H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall Dimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e10.77 in. x 5.62 in. x 7.38 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eSingle Base Rail Clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eClamp Material\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Rail Diameters\u003c\/th\u003e\n\u003ctd\u003e1 in., 1-1\/8 in., 1-1\/4 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFace Finish\u003c\/th\u003e\n\u003ctd\u003eUn-Cut (custom cutout required)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does un-cut mean on this RailPod?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It means the face ships as a blank with no pre-made opening. You cut the cutout yourself to match your exact display, which gives you a tight, flush fit around the screen instead of a generic hole. It's a little more work up front, but the finished look is worth it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size display fits the face?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The usable face is 8-3\/4 inches wide by 6 inches tall. That's sized for most 7 to 9 inch chartplotters and multifunction displays. Check your unit's cutout dimensions against that face before you order.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What rail sizes does the clamp fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The single base clamp fits all the standard rail diameters, 1 inch, 1-1\/8 inch, and 1-1\/4 inch outside diameter. If your rail is on the smaller end, a rubber shim under the clamp takes up any slack.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the mounting hardware corrosion resistant?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The clamp is stainless steel, so it holds up to salt and spray without rusting or streaking your gelcoat. We'd still add a touch of anti-seize on the threads before final torque to keep them from galling.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I cut the face to fit my screen?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Use your display's cutout template, or trace the bezel and step in for the flange. A fine-tooth jigsaw or rotary tool cuts the acrylic-capped ABS cleanly. Go slow so you don't chip the acrylic cap, then dress the edges with fine sandpaper and dry-fit before you drill.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long does the install take?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Figure about 45 minutes on a clean aluminum rail, not counting the time to cut the face for your specific display. Powder-coated rails take a little extra care to align the clamp squarely.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will a single clamp hold the display steady?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"For a lighter 7 to 9 inch display, the single base clamp is plenty steady. If you're mounting something larger and heavier, plan on adding a second support point so one clamp isn't fighting vibration at speed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the overall dimensions?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The pod is 10.77 inches wide, 5.62 inches deep, and 7.38 inches tall overall. Check that 7.38 inch height against your console and any bimini or hardtop frame so the pod clears when you swing it on the rail.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's it made of and how does it hold up outside?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's acrylic-capped ABS plastic in white, the same material Seaview uses across its pods. The acrylic cap gives it a hard, weather-facing surface built to take UV and salt air season after season.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the display come with it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is the mounting pod only. You supply the chartplotter or multifunction display, run its power and network cabling, and use the fasteners that hold your unit to the cut face. The rail clamp and stainless hardware to attach the pod to the rail are included.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Seaview","offers":[{"title":"Default Title","offer_id":44788349010013,"sku":"2007325","price":312.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_4b3d0061-0241-4d05-b47d-ff66a32332f3.jpg?v=1785009512","url":"https:\/\/nvnmarine.com\/products\/seaview-sv4400r-railpod-un-cut-chartplotter-mount","provider":"NVN Marine","version":"1.0","type":"link"}