{"product_id":"seaview-sv4400p-powerpod-mfd-mount-un-cut","title":"Seaview SV4400P PowerPod Un-Cut MFD Mount, 8.75-Inch Face","description":"\u003cp class=\"nvn-hero\"\u003eThe Seaview SV4400P PowerPod gives your chartplotter or multifunction display a clean, purpose-built home at the helm. It ships un-cut, so you cut the exact opening your display needs. Acrylic-capped ABS on a machined aluminum base, built to live in salt air and sun.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Seaview SV4400P PowerPod gives you a proper, finished home for a chartplotter or multifunction display right at the helm. It's an un-cut pod, which means the face comes solid so you cut the exact opening your display needs. Molded from acrylic-capped ABS plastic on a machined aluminum base, it's built to live outside in salt air and sun instead of hiding below.\u003c\/p\u003e\n\u003cp\u003eIf you've ever tried to flush-mount a 7 or 9 inch display into a thin, curved fiberglass dash, you know the problem. There often isn't enough flat real estate, the dash curves right where you need it flat, or the back of the unit fouls the wiring behind the console. A PowerPod solves that by raising the display up and forward on its own pedestal. You get a solid mounting surface angled toward your eyes, room behind the face for connectors and cable, and a clean look instead of a hacked-up dash.\u003c\/p\u003e\n\u003cp\u003eThe usable face measures 8-3\/4 inches wide by 6 inches tall. That's the working area you have to cut into, and it's sized for most 7 to 9 inch displays once you account for their bezels. Overall the pod runs 10.77 inches wide, 5.62 inches deep, and 7.38 inches tall, so measure your console before you commit. The 5.62 inch depth clears the back of most displays in that size range. But check your unit's connector stack. Some displays have rear-facing plugs that add an inch or more, and you want the cables breathing, not crammed against the pod wall.\u003c\/p\u003e\n\u003cp\u003eBecause it ships un-cut, you template your display's cutout onto the flat face and cut it yourself with a jigsaw or a rotary tool. Take your time here. Mask the face with tape to protect the acrylic cap from scratches, and cut just inside your line so you can file down to a clean, tight fit. The acrylic-capped ABS cuts cleanly and won't crack the way brittle plastics do, but a slow blade and a careful line make all the difference.\u003c\/p\u003e\n\u003cp\u003eThe aluminum base is pre-drilled for a flat mounting surface. On a flat dash or hardtop it drops right on. On a curved surface you'll want to cut a couple of shims or a small backing plate so the base sits flat and doesn't rock. And here's a tip from folks who run this pod on outboard boats: high vibration can work the base loose over a season, so a backing plate under the dash plus a dab of thread locker on the fasteners is cheap insurance. Bed the base to the dash with a quality marine adhesive sealant, not plain silicone, so the pod-to-dash joint stays watertight and still comes apart for service down the road.\u003c\/p\u003e\n\u003cp\u003eThere's a cable pass-through for your power, network, and transducer leads. If you're running a full NMEA 2000 backbone plus power plus a transducer cable, that's a fat bundle, so plan your routing and open the hole up a little before the pod is bedded down. It's a lot easier to do on the bench than after it's sealed to the dash.\u003c\/p\u003e\n\u003cp\u003eThe white ABS matches most helm and console gelcoat, and plenty of owners paint the aluminum base to match their boat exactly. One honest note: like any acrylic-capped plastic living in strong sun, the cap can haze over a few seasons in places like Florida. A yearly pass with a plastic polish keeps it clear and looking new. It's a mount you'll keep, not a throwaway part, so a little maintenance goes a long way.\u003c\/p\u003e\n\u003cp\u003eSeaview has been building helm pods and mounts for power and sailboats, pleasure and commercial, for a long time, and it shows in the fit and finish. If you want your new chartplotter mounted right, angled toward the captain, and wired clean, the SV4400P is a solid way to get there. Cut it to fit, bed it properly, and it'll carry your display for the life of the boat.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eUn-cut acrylic-capped ABS face lets you cut the exact opening your chartplotter or MFD needs\u003c\/li\u003e\n  \u003cli\u003e8-3\/4 inch wide by 6 inch tall usable face fits most 7 to 9 inch displays once you account for bezels\u003c\/li\u003e\n  \u003cli\u003eOverall footprint of 10.77 in W x 5.62 in D x 7.38 in H raises the display up and forward at the helm\u003c\/li\u003e\n  \u003cli\u003eMachined aluminum base pre-drilled for a flat mounting surface\u003c\/li\u003e\n  \u003cli\u003eAcrylic-capped ABS construction resists cracking and stands up to salt air and UV\u003c\/li\u003e\n  \u003cli\u003eWhite finish matches most console and helm gelcoat, and the base takes paint for an exact match\u003c\/li\u003e\n  \u003cli\u003eCable pass-through routes power, NMEA network, and transducer leads behind the face\u003c\/li\u003e\n  \u003cli\u003e5.62 inch depth clears the connectors behind most mid-size displays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Seaview reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size display does the SV4400P fit?\u003c\/summary\u003e\n    \u003cp\u003eThe usable face is 8-3\/4 inches wide by 6 inches tall, which suits most 7 to 9 inch chartplotters and multifunction displays once you account for the bezel. Because it ships un-cut, you cut the exact opening your unit needs.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come pre-cut for my chartplotter?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's an un-cut pod, so you template your display's cutout onto the flat face and cut it yourself with a jigsaw or rotary tool. That's what lets one pod fit a wide range of displays.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the overall dimensions?\u003c\/summary\u003e\n    \u003cp\u003eThe pod is 10.77 inches wide, 5.62 inches deep, and 7.38 inches tall overall. Measure your console before you commit so you know it sits where you want it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the PowerPod made of?\u003c\/summary\u003e\n    \u003cp\u003eThe pod is acrylic-capped ABS plastic in white, mounted on a machined aluminum base. That combination handles salt air, UV, and vibration at the helm.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I mount it on a curved dash?\u003c\/summary\u003e\n    \u003cp\u003eThe aluminum base is pre-drilled for a flat surface and drops right onto a flat dash or hardtop. For a curved surface, cut a couple of shims or a small backing plate so the base sits flat and doesn't rock.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it stay put on a boat with a lot of vibration?\u003c\/summary\u003e\n    \u003cp\u003eOn high-vibration outboard rigs, add a backing plate under the dash and a dab of thread locker on the fasteners. That keeps the base from working loose over a season.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I route a NMEA 2000 and transducer cable through it?\u003c\/summary\u003e\n    \u003cp\u003eYes, there's a cable pass-through for power, network, and transducer leads. If you're running a full NMEA 2000 backbone plus a transducer cable, plan the routing and open the hole up a little before you bed the pod down.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I keep water out at the mount?\u003c\/summary\u003e\n    \u003cp\u003eBed the base to the dash with a quality marine adhesive sealant rather than plain silicone. The pod-to-dash joint is the spot to seal, and a proper sealant stays watertight while still letting you service it later.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill the white plastic yellow in the sun?\u003c\/summary\u003e\n    \u003cp\u003eLike any acrylic-capped plastic in strong sun, the cap can haze over a few seasons in high-UV areas. A yearly pass with a plastic polish keeps it clear and looking new.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the difference between the PowerPod and the RailPod?\u003c\/summary\u003e\n    \u003cp\u003eThis SV4400P PowerPod mounts to a flat surface such as a console or dash on its aluminum base. The rail-mount version in the same Seaview line clamps to a tube rail instead. Pick the PowerPod when you have a flat surface to build on.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eSeaview SV4400P PowerPod Un-Cut Chartplotter \/ MFD Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSeaview\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eSV4400P\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e850073256404\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUsable Face Dimension (W x H)\u003c\/th\u003e\n\u003ctd\u003e8-3\/4 in x 6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall Dimension (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e10.77 in x 5.62 in x 7.38 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAcrylic-Capped ABS Plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBase Material\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFace Style\u003c\/th\u003e\n\u003ctd\u003eUn-Cut (trim to fit display)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eConsole \/ Dash Surface Mount PowerPod\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDesigned For\u003c\/th\u003e\n\u003ctd\u003eChartplotter \/ Multifunction Display\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size display does the SV4400P fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The usable face is 8-3\/4 inches wide by 6 inches tall, which suits most 7 to 9 inch chartplotters and multifunction displays once you account for the bezel. Because it ships un-cut, you cut the exact opening your unit needs.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come pre-cut for my chartplotter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's an un-cut pod, so you template your display's cutout onto the flat face and cut it yourself with a jigsaw or rotary tool. That's what lets one pod fit a wide range of displays.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the overall dimensions?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The pod is 10.77 inches wide, 5.62 inches deep, and 7.38 inches tall overall. Measure your console before you commit so you know it sits where you want it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the PowerPod made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The pod is acrylic-capped ABS plastic in white, mounted on a machined aluminum base. That combination handles salt air, UV, and vibration at the helm.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I mount it on a curved dash?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The aluminum base is pre-drilled for a flat surface and drops right onto a flat dash or hardtop. For a curved surface, cut a couple of shims or a small backing plate so the base sits flat and doesn't rock.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it stay put on a boat with a lot of vibration?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"On high-vibration outboard rigs, add a backing plate under the dash and a dab of thread locker on the fasteners. That keeps the base from working loose over a season.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I route a NMEA 2000 and transducer cable through it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, there's a cable pass-through for power, network, and transducer leads. If you're running a full NMEA 2000 backbone plus a transducer cable, plan the routing and open the hole up a little before you bed the pod down.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I keep water out at the mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Bed the base to the dash with a quality marine adhesive sealant rather than plain silicone. The pod-to-dash joint is the spot to seal, and a proper sealant stays watertight while still letting you service it later.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will the white plastic yellow in the sun?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Like any acrylic-capped plastic in strong sun, the cap can haze over a few seasons in high-UV areas. A yearly pass with a plastic polish keeps it clear and looking new.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the difference between the PowerPod and the RailPod?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This SV4400P PowerPod mounts to a flat surface such as a console or dash on its aluminum base. The rail-mount version in the same Seaview line clamps to a tube rail instead. Pick the PowerPod when you have a flat surface to build on.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Seaview","offers":[{"title":"Default Title","offer_id":44788244676701,"sku":"2007249","price":352.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_d83388be-92f8-4a64-9deb-93bb15dca93a.jpg?v=1785004239","url":"https:\/\/nvnmarine.com\/products\/seaview-sv4400p-powerpod-mfd-mount-un-cut","provider":"NVN Marine","version":"1.0","type":"link"}