{"product_id":"seaview-sv4100r-railpod-mfd-rail-mount-white","title":"Seaview SV4100R RailPod Chartplotter and MFD Rail Mount","description":"\u003cp class=\"nvn-hero\"\u003eThe Seaview SV4100R RailPod gives you a clean, flush place to mount a chartplotter or multifunction display right on your rail. It clamps to standard 1 inch through 1-1\/4 inch tubing, and the un-cut face lets you trim the opening to fit your exact screen. White acrylic-capped ABS, stainless clamp, built to live outside.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eSeaview builds mounts for one reason. To get your electronics exactly where you want them, solid enough to trust in a chop. The SV4100R RailPod does that for a chartplotter or a multifunction display, clamping straight onto a rail so you're not sacrificing dash space you don't have. If your helm is already crowded, or you run a center console where the console face is full, this is how you add a screen without cutting into the boat.\u003c\/p\u003e\n\u003cp\u003eHere's how it works. The pod clamps to standard round tubing, 1 inch, 1-1\/8 inch, or 1-1\/4 inch, using a single stainless steel base clamp. That covers most T-top rails, hardtop frames, leaning post grab rails, and arch tubing you'll find out there. Once it's locked down, you've got a flat 4-1\/2 inch by 4-1\/2 inch face to work with. That's the usable area, and it's sized for compact displays in the 4 to 7 inch class where a rail pod makes the most sense.\u003c\/p\u003e\n\u003cp\u003eThe un-cut part matters. This RailPod ships with a solid face, no pre-cut opening. You cut it to match your specific display's mounting template. That's a good thing. It means the pod isn't locked to one brand or one bezel shape, and you get a tight, custom opening instead of a loose universal hole. Measure twice, mark from the display's own template, and cut once. If you're not comfortable with that, any rigger or marine electronics shop can do it in a few minutes.\u003c\/p\u003e\n\u003cp\u003eConstruction is acrylic-capped ABS plastic in white. The acrylic cap gives you a harder, UV-facing outer surface over the ABS core, which holds up better to sun and salt than bare plastic. The clamp hardware is stainless. A couple of real-world tips from installs we've seen. If you're clamping onto a polished aluminum rail, run a thin strip of rubber or rigging tape under the clamp so it doesn't mar the finish and so it grips without slipping. And give the stainless hardware a fresh-water rinse now and then if you run in salt, same as the rest of your deck gear.\u003c\/p\u003e\n\u003cp\u003eOne honest note on any single-base rail mount, this one included. A single clamp point is clean and simple, but a heavier display out at the end of a long unsupported rail can transmit vibration at speed on a planing hull. If you're mounting a larger screen or running hard offshore, add a support strut or pick a rail section close to a welded joint where there's less flex. For the compact displays this pod is really meant for, that's rarely an issue.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Center console owners who've run out of dash. Bay boat and flats anglers who want the plotter up on the T-top rail and out of the spray. Pontoon owners adding a small chartplotter to a bimini or rail. Sailors who want a repeater screen mounted on a pushpit or guard rail. Anywhere you've got standard round tubing and need a screen somewhere the factory didn't plan for, a RailPod solves it. And because you cut the face yourself, it works with whatever compact display you're already running.\u003c\/p\u003e\n\u003cp\u003eOverall the pod measures 6 inches wide, 4.06 inches deep, and 5.91 inches tall, so check your clearances before you commit to a spot. You want the screen readable from the helm, the cables able to route down through or behind the rail, and nothing fouling a throttle or a grab rail. Dry-fit it first, then bring the display's cable straight out the back of the pod and down along the tube. Leave yourself a service loop so you can pull the screen for storage or winterizing without fighting the wire. A little planning here is the difference between an install that looks factory and one that looks like an afterthought.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eAcrylic-capped ABS plastic construction with a harder UV-facing outer surface for better sun and salt resistance\u003c\/li\u003e\n  \u003cli\u003eWhite finish that blends with most helm and console setups\u003c\/li\u003e\n  \u003cli\u003e4-1\/2 inch by 4-1\/2 inch usable face sized for compact 4 to 7 inch chartplotters and MFDs\u003c\/li\u003e\n  \u003cli\u003eSingle stainless steel base clamp fits standard 1 inch, 1-1\/8 inch, and 1-1\/4 inch round rails\u003c\/li\u003e\n  \u003cli\u003eUn-cut solid face lets you trim a custom opening for your exact display, not locked to one bezel\u003c\/li\u003e\n  \u003cli\u003eCompact 6 inch W x 4.06 inch D x 5.91 inch H footprint for tight rail sections\u003c\/li\u003e\n  \u003cli\u003eMounts on T-top rails, hardtop frames, leaning post grab rails, and arch tubing\u003c\/li\u003e\n  \u003cli\u003eStainless hardware stands up to the marine environment with a periodic fresh-water rinse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Seaview reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size display fits the SV4100R RailPod?\u003c\/summary\u003e\n    \u003cp\u003eThe usable face is 4-1\/2 inches wide by 4-1\/2 inches high, so it's sized for compact chartplotters and multifunction displays in the 4 to 7 inch class. Check your display's cutout template against that face before you cut.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat rail diameters does the clamp fit?\u003c\/summary\u003e\n    \u003cp\u003eIt fits standard round tubing in 1 inch, 1-1\/8 inch, and 1-1\/4 inch diameters using a single stainless steel base clamp. That covers most T-top rails, hardtop frames, leaning post grab rails, and arch tubing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does un-cut mean?\u003c\/summary\u003e\n    \u003cp\u003eThe pod ships with a solid, un-cut face and no pre-made opening. You cut the opening yourself to match your specific display's mounting template. That gives you a tight custom fit instead of a loose universal hole, and it means the pod isn't tied to one bezel shape.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the RailPod made of?\u003c\/summary\u003e\n    \u003cp\u003eAcrylic-capped ABS plastic in white. The acrylic cap is a harder outer surface over the ABS core, so it handles sun and salt better than bare plastic. The clamp hardware is stainless steel.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs a single base clamp stable enough?\u003c\/summary\u003e\n    \u003cp\u003eFor the compact displays this pod is meant for, yes. A single clamp point is clean and simple. If you're mounting a heavier screen far out on a long unsupported rail and running hard offshore, add a support strut or pick a rail section near a welded joint to cut down on flex at speed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I mount it on an aluminum rail without marring the finish?\u003c\/summary\u003e\n    \u003cp\u003eYes. Run a thin strip of rubber or rigging tape under the clamp before you tighten it. That protects a polished rail from scratches and helps the clamp grip without slipping.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I route the display cable?\u003c\/summary\u003e\n    \u003cp\u003eMost installers bring the cable straight out the back of the pod and run it down along the rail, either zip-tied to the tube or inside it if the rail is open-ended. Leave a service loop so you can pull the screen for storage or winterizing without fighting the wire.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I care for it in salt water?\u003c\/summary\u003e\n    \u003cp\u003eGive the stainless hardware a fresh-water rinse now and then, same as the rest of your deck gear. The acrylic-capped surface handles UV and spray, but a rinse keeps everything looking and working right.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the overall dimensions?\u003c\/summary\u003e\n    \u003cp\u003eThe pod is 6 inches wide, 4.06 inches deep, and 5.91 inches tall overall. Dry-fit it in your chosen spot first to confirm the screen is readable from the helm and nothing fouls a throttle or grab rail.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with the clamp hardware?\u003c\/summary\u003e\n    \u003cp\u003eYes. The SV4100R includes the single stainless steel base rail clamp needed to mount it to your rail. You supply the display and cut the face to fit.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eSeaview SV4100R RailPod Chartplotter and MFD Rail Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSeaview\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eSV4100R\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e850073256398\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eChartplotter \/ Multi-Function Display mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eUn-cut face (trim to fit)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAcrylic-Capped ABS Plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUsable Face Dimension\u003c\/th\u003e\n\u003ctd\u003e4-1\/2 in W x 4-1\/2 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall Dimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e6 in W x 4.06 in D x 5.91 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Style\u003c\/th\u003e\n\u003ctd\u003eSingle Base Rail Clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eClamp Material\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits Rail Diameters\u003c\/th\u003e\n\u003ctd\u003e1 in, 1-1\/8 in, 1-1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size display fits the SV4100R RailPod?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The usable face is 4-1\/2 inches wide by 4-1\/2 inches high, so it's sized for compact chartplotters and multifunction displays in the 4 to 7 inch class. Check your display's cutout template against that face before you cut.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What rail diameters does the clamp fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It fits standard round tubing in 1 inch, 1-1\/8 inch, and 1-1\/4 inch diameters using a single stainless steel base clamp. That covers most T-top rails, hardtop frames, leaning post grab rails, and arch tubing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does un-cut mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The pod ships with a solid, un-cut face and no pre-made opening. You cut the opening yourself to match your specific display's mounting template. That gives you a tight custom fit instead of a loose universal hole, and it means the pod isn't tied to one bezel shape.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the RailPod made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Acrylic-capped ABS plastic in white. The acrylic cap is a harder outer surface over the ABS core, so it handles sun and salt better than bare plastic. The clamp hardware is stainless steel.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is a single base clamp stable enough?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"For the compact displays this pod is meant for, yes. A single clamp point is clean and simple. If you're mounting a heavier screen far out on a long unsupported rail and running hard offshore, add a support strut or pick a rail section near a welded joint to cut down on flex at speed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I mount it on an aluminum rail without marring the finish?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Run a thin strip of rubber or rigging tape under the clamp before you tighten it. That protects a polished rail from scratches and helps the clamp grip without slipping.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I route the display cable?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Most installers bring the cable straight out the back of the pod and run it down along the rail, either zip-tied to the tube or inside it if the rail is open-ended. Leave a service loop so you can pull the screen for storage or winterizing without fighting the wire.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I care for it in salt water?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Give the stainless hardware a fresh-water rinse now and then, same as the rest of your deck gear. The acrylic-capped surface handles UV and spray, but a rinse keeps everything looking and working right.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the overall dimensions?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The pod is 6 inches wide, 4.06 inches deep, and 5.91 inches tall overall. Dry-fit it in your chosen spot first to confirm the screen is readable from the helm and nothing fouls a throttle or grab rail.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with the clamp hardware?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The SV4100R includes the single stainless steel base rail clamp needed to mount it to your rail. You supply the display and cut the face to fit.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Seaview","offers":[{"title":"Default Title","offer_id":44996364992605,"sku":"2007711","price":248.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/111864XL.jpg?v=1788624616","url":"https:\/\/nvnmarine.com\/products\/seaview-sv4100r-railpod-mfd-rail-mount-white","provider":"NVN Marine","version":"1.0","type":"link"}