{"product_id":"seaview-modular-top-plate-for-kvh-tv5-hd7-fb500-v7","title":"Seaview Modular Top Plate for KVH TV5, HD7, FB500, V7","description":"\u003cp class=\"nvn-hero\"\u003eThe Seaview ADAS2BLK is the top plate that ties your satellite dome to a Seaview modular mount. It's machined for a specific dome footprint, so the electronics secure with only four visible screws and no swiss-cheese hole pattern. Hardcoat anodized and powder coated black to stand up to salt air.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eSeaview builds mounts for the gear that lives up on your hardtop or radar arch, and the Modular Top Plate is the piece that ties your satellite dome to the mount underneath it. If you've ever looked up at a poorly mounted satcom dome and seen a dozen mismatched holes drilled through the base, you already understand why this plate exists. It's the clean way to secure a dome to a Seaview modular mount.\u003c\/p\u003e\n\u003cp\u003eHere's how the system works. Seaview's modular mounts are built in two parts. You've got the base mount that bolts to your boat, and a top plate that's cut to match a specific piece of equipment. This ADAS2BLK is one of those top plates. It drops onto a Seaview modular mount and gives your dome a purpose-built landing pad instead of a generic slab with a scatter of holes. The result up top is only four visible mounting screws holding the electronics down. No swiss-cheese look, no guesswork about which holes matter.\u003c\/p\u003e\n\u003cp\u003eThat clean four-screw footprint isn't just about looks, though it does look sharp. Fewer penetrations means fewer places for water to work its way in, and a plate that's actually machined for your dome sits flat and true. You're not shimming anything or hoping a universal bracket lines up. It bolts where it's supposed to bolt. And because the plate carries the load across its full footprint, the dome sits solid at speed instead of drumming against a couple of point contacts.\u003c\/p\u003e\n\u003cp\u003eCorrosion protection is where Seaview earns its keep. This plate gets a hardcoat anodizing treatment before it's powder coated, so you've got two layers of defense against salt air and spray. That matters when the part is mounted high and exposed, taking sun and salt every day the boat's in the water. A raw or single-coated plate up on an arch tends to chalk and pit within a season or two. The hardcoat-plus-powder finish holds up a lot longer. The finish here is black, which blends in nicely under a black dome and against dark hardtops and arches. It's a small detail that keeps the whole installation looking intentional.\u003c\/p\u003e\n\u003cp\u003eOne thing to get right before you order: this is a top plate, not a complete mount. It's designed to sit on a Seaview modular mount, so you'll want to confirm you've got the matching base for your install, whether that's a mast mount, a rail mount, or a flat-surface mount. And just as important, a top plate is cut for a specific set of antenna domes. Check the compatibility list in the specifications below and match it to your exact dome model before you buy. Order the plate that fits your equipment, not the one that looks close.\u003c\/p\u003e\n\u003cp\u003eInstallation is manageable for a competent DIYer. The base mount does the structural work, so once that's through-bolted with a proper backing plate, dropping the top plate on and setting the dome is straightforward. Snug the four screws evenly, bed everything with a good marine sealant, and you're done. Take your time on the sealant so the fastener holes stay dry for the life of the mount. If you're mounting a heavier dome, take the extra minute to make sure your base and backing are up to the load before you send the boat offshore.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone running a satellite TV or satcom dome who wants it mounted like the factory would've done it. We see these go on sportfishers, cruisers, and trawlers where there's a real communications setup up top and the owner cares about a tidy, corrosion-resistant install. It's a straightforward part, but it's the difference between a dome that looks bolted-on and one that looks like it belongs there. If you're not sure which top plate and base combination fits your dome and your boat, give us a call and we'll help you spec the right pieces.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSeaview modular top plate that drops onto a Seaview modular mount for a purpose-built dome landing\u003c\/li\u003e\n  \u003cli\u003eMachined footprint fits a specific set of satellite dome models so the plate sits flat and true, no shimming\u003c\/li\u003e\n  \u003cli\u003eOnly four visible mounting screws up top for a clean install with no swiss-cheese hole pattern\u003c\/li\u003e\n  \u003cli\u003eHardcoat anodized before powder coating for two layers of corrosion protection against salt air and spray\u003c\/li\u003e\n  \u003cli\u003eBlack finish blends under black domes and against dark hardtops and radar arches\u003c\/li\u003e\n  \u003cli\u003eFewer base penetrations mean fewer paths for water intrusion\u003c\/li\u003e\n  \u003cli\u003ePart of the Seaview two-part modular system, pair it with the matching base mount for your boat\u003c\/li\u003e\n  \u003cli\u003eManufacturer part number ADAS2BLK, an authorized Seaview part backed by full warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Seaview reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat exactly is a Seaview modular top plate?\u003c\/summary\u003e\n    \u003cp\u003eIt's the upper piece of Seaview's two-part mounting system. The base mount bolts to your boat, and the top plate is machined to fit a specific piece of equipment. This one, the ADAS2BLK, gives your satellite dome a clean, purpose-built surface to bolt down to.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich domes does the ADAS2BLK fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's cut for a specific set of satellite antenna domes. Check the compatibility list in the specifications table and match it to your exact model before you order, because a top plate is machined for a particular footprint and won't cross over to a different dome.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need a separate base mount?\u003c\/summary\u003e\n    \u003cp\u003eYes. This is the top plate only. It's designed to sit on a Seaview modular mount, so you'll need the matching base, whether that's a mast, rail, or flat-surface mount, to complete the install. If you're not sure which base fits your boat, give us a call.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy only four screws?\u003c\/summary\u003e\n    \u003cp\u003eSeaview machines the plate to your dome's pattern, so the electronics secure with just four visible mounting screws. That's the clean look Seaview is known for, and fewer holes means fewer places for water to sneak in.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it built to survive saltwater?\u003c\/summary\u003e\n    \u003cp\u003eIt's hardcoat anodized and then powder coated, so you've got two layers of protection against salt air and spray. That's what you want on a part mounted high and exposed to sun and salt every day.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it?\u003c\/summary\u003e\n    \u003cp\u003eBlack. It blends in nicely under a black dome and against dark hardtops and arches.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I install this myself?\u003c\/summary\u003e\n    \u003cp\u003eIf you're comfortable through-bolting the base with a proper backing plate, the rest is straightforward. Set the top plate, snug the four screws evenly, and bed everything with a good marine sealant. For heavier domes, make sure your base and backing are rated for the load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill this work as a universal plate for any equipment?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's machined for a specific dome footprint, not a universal blank. Order the top plate that matches your equipment rather than one that looks close.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre you an authorized Seaview dealer?\u003c\/summary\u003e\n    \u003cp\u003eYes. We're an authorized Seaview reseller, so this plate comes with the full manufacturer warranty and support from techs who actually rig boats.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eSeaview Modular Top Plate for KVH TV5, HD7, FB500, V7\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSeaview\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eADAS2BLK\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e727908835472\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHardcoat anodized, powder coated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eComponent Type\u003c\/th\u003e\n\u003ctd\u003eModular Top Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting System\u003c\/th\u003e\n\u003ctd\u003eSeaview Modular Mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Equipment\u003c\/th\u003e\n\u003ctd\u003eKVH TV5, HD7, FB500, V7\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVisible Fasteners\u003c\/th\u003e\n\u003ctd\u003eFour mounting screws\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eSatellite dome and antenna mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eRadar \u0026amp; Antenna Mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What exactly is a Seaview modular top plate?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the upper piece of Seaview's two-part mounting system. The base mount bolts to your boat, and the top plate is machined to fit a specific piece of equipment. This one, the ADAS2BLK, gives your satellite dome a clean, purpose-built surface to bolt down to.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which domes does the ADAS2BLK fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's cut for a specific set of satellite antenna domes. Check the compatibility list in the specifications table and match it to your exact model before you order, because a top plate is machined for a particular footprint and won't cross over to a different dome.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need a separate base mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. This is the top plate only. It's designed to sit on a Seaview modular mount, so you'll need the matching base, whether that's a mast, rail, or flat-surface mount, to complete the install. If you're not sure which base fits your boat, give us a call.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why only four screws?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Seaview machines the plate to your dome's pattern, so the electronics secure with just four visible mounting screws. That's the clean look Seaview is known for, and fewer holes means fewer places for water to sneak in.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it built to survive saltwater?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's hardcoat anodized and then powder coated, so you've got two layers of protection against salt air and spray. That's what you want on a part mounted high and exposed to sun and salt every day.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Black. It blends in nicely under a black dome and against dark hardtops and arches.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I install this myself?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"If you're comfortable through-bolting the base with a proper backing plate, the rest is straightforward. Set the top plate, snug the four screws evenly, and bed everything with a good marine sealant. For heavier domes, make sure your base and backing are rated for the load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will this work as a universal plate for any equipment?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's machined for a specific dome footprint, not a universal blank. Order the top plate that matches your equipment rather than one that looks close.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are you an authorized Seaview dealer?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. We're an authorized Seaview reseller, so this plate comes with the full manufacturer warranty and support from techs who actually rig boats.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Seaview","offers":[{"title":"Default Title","offer_id":44996364435549,"sku":"2007710","price":248.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/SVWADAS2BLK_001.jpg?v=1788624585","url":"https:\/\/nvnmarine.com\/products\/seaview-modular-top-plate-for-kvh-tv5-hd7-fb500-v7","provider":"NVN Marine","version":"1.0","type":"link"}