{"product_id":"seastar-xtreme-jp5060x-jack-plate-6in-setback","title":"SeaStar Xtreme JP5060X Hydraulic Jack Plate, 6\" Setback","description":"\u003cp class=\"nvn-hero\"\u003eThe SeaStar Xtreme JP5060X is a hydraulic jack plate with a 6 inch setback, built for engines up to 400 hp. It adjusts engine height in 8.5 seconds, even at full speed, so you can fine tune your boat to the water you're running.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe SeaStar Xtreme JP5060X is a hydraulic jack plate with a 6 inch setback, built for engines up to 400 hp. If you've ever watched a big outboard sit too deep at the dock or too shallow coming out of the hole, you already know why a jack plate earns its spot on the transom. This one lets you change engine height from the helm, without crawling around the back of the boat.\u003c\/p\u003e\n\u003cp\u003eSpeed is the headline. The Xtreme adjusts engine height in just 8.5 seconds, even while the boat is moving at full speed. That's quick enough to matter when you're running from a deep channel onto a skinny flat, or lifting the motor to clear a bar and then dropping it back down for grip. The integrated hydraulic actuator handles the lift, and the Xtreme line is described with 5.6 inches of vertical travel. Not a lot of numbers, but they're the ones that count.\u003c\/p\u003e\n\u003cp\u003eStrength matters on a plate that carries this much engine. The frame is built from heavy duty, high strength materials, and it's designed to handle engines up to 400 hp. At 53 lbs net, it's a serious piece of hardware, so plan your transom and rigging around that weight. Composite bushings keep the movement smooth, which is exactly what you want when you're asking the plate to raise and lower a big outboard under power.\u003c\/p\u003e\n\u003cp\u003eService access is better than you'd expect. There's easy wrench access to the engine bolts from the side, so mounting, adjusting, or pulling the motor doesn't mean tearing the whole assembly apart. If you've ever tried to reach a transom bolt through a gap the size of your hand, you'll appreciate that detail.\u003c\/p\u003e\n\u003cp\u003eBefore you order, grab a tape measure. The plate is 16 1\/8 inches wide, 17 3\/4 inches high, and 8 inches deep, and it's finished in black. Check that against your transom width, the clearance behind the boat, and anything else mounted nearby, like a swim platform or a bracket. Dimensions are what trip people up on jack plate installs, and it's much easier to catch a problem on paper than with a drill in your hand. Take a minute to measure twice, then measure the engine's mounting footprint too, so everything lines up the first time you set the motor on the plate.\u003c\/p\u003e\n\u003cp\u003eThe setback is the other big decision. This listing is the 6 inch setback model, part number JP5060X. The Xtreme line also comes in 4, 8, 10, and 12 inch setbacks, so you can match the plate to your hull and motor. Setback moves the engine back from the transom and changes how the prop sits in the water, so it's worth thinking through for your particular boat. If you're not sure which one fits, we're glad to talk it over with you.\u003c\/p\u003e\n\u003cp\u003eWe'd also suggest confirming a few things about your rig. Check your engine's weight and horsepower against the 400 hp rating. Think about the hydraulic side of the system too. The plate has an integrated hydraulic actuator, but we don't list a pump, hoses, or helm controls with this part, so ask us what you'll need to run it and we'll point you the right way. That small bit of homework saves a return trip to the dock.\u003c\/p\u003e\n\u003cp\u003ePut it all together and you've got a fast, tough, serviceable jack plate for a big outboard. It's the kind of gear that lets you fine tune engine height as conditions change, whether that's a long run, a shallow approach, or a day of working different water. We've rigged up our share of boats and a good plate makes a real difference out there. And because it's built to take a beating, you can rig it once and get back to fishing, cruising, or running hard instead of fussing with it every trip.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eUp to 400 hp rating, with a heavy duty frame built for strong engines\u003c\/li\u003e\n  \u003cli\u003e8.5 second height adjustment, even while the boat is moving at full speed\u003c\/li\u003e\n  \u003cli\u003e6 inch setback, part number JP5060X\u003c\/li\u003e\n  \u003cli\u003eIntegrated hydraulic actuator for engine lift\u003c\/li\u003e\n  \u003cli\u003eComposite bushings for smooth operation\u003c\/li\u003e\n  \u003cli\u003eSide wrench access to engine bolts for easier service\u003c\/li\u003e\n  \u003cli\u003e53 lbs net weight, 16 1\/8 in wide, 17 3\/4 in high, 8 in deep\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Seastar reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the SeaStar Xtreme JP5060X?\u003c\/summary\u003e\n    \u003cp\u003eIt's a hydraulic jack plate with a 6 inch setback. It lets you raise and lower your outboard to adjust engine height.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much horsepower can the JP5060X handle?\u003c\/summary\u003e\n    \u003cp\u003eThe distributor lists it for engines up to 400 hp. Its heavy duty frame is built for some of the strongest engines on the water.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow fast does the Xtreme jack plate adjust?\u003c\/summary\u003e\n    \u003cp\u003eIt adjusts engine height in 8.5 seconds, even while the boat is moving at full speed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow far does the engine lift?\u003c\/summary\u003e\n    \u003cp\u003eThe Xtreme line is described with 5.6 inches of vertical travel from its integrated hydraulic actuator.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the dimensions and weight?\u003c\/summary\u003e\n    \u003cp\u003eThe plate is 16 1\/8 inches wide, 17 3\/4 inches high, and 8 inches deep. Net weight is 53 lbs.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat setbacks does the Xtreme line come in?\u003c\/summary\u003e\n    \u003cp\u003eThe Xtreme line is offered in 4, 6, 8, 10, and 12 inch setbacks. This listing is the 6 inch setback model.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I get at the engine bolts after the plate is installed?\u003c\/summary\u003e\n    \u003cp\u003eYes. The design gives you easy wrench access to the engine bolts from the side.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a hydraulic pump and controls?\u003c\/summary\u003e\n    \u003cp\u003eWe don't list a pump, hoses, or helm controls with this part, so treat them as separate. Contact us and we'll help you figure out what your setup needs.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eSeaStar Xtreme Mount Jack Plate w\/6\" Setback\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSeastar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJP5060X\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e731957929631\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eHydraulic Jack Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSetback\u003c\/th\u003e\n\u003ctd\u003e6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Engine Power\u003c\/th\u003e\n\u003ctd\u003eUp to 400 hp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e17 3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e16 1\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e53 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLift Time\u003c\/th\u003e\n\u003ctd\u003e8.5 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBushings\u003c\/th\u003e\n\u003ctd\u003eComposite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator\u003c\/th\u003e\n\u003ctd\u003eIntegrated hydraulic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eJack Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the SeaStar Xtreme JP5060X?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a hydraulic jack plate with a 6 inch setback. It lets you raise and lower your outboard to adjust engine height.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much horsepower can the JP5060X handle?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The distributor lists it for engines up to 400 hp. Its heavy duty frame is built for some of the strongest engines on the water.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How fast does the Xtreme jack plate adjust?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It adjusts engine height in 8.5 seconds, even while the boat is moving at full speed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How far does the engine lift?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The Xtreme line is described with 5.6 inches of vertical travel from its integrated hydraulic actuator.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the dimensions and weight?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The plate is 16 1\/8 inches wide, 17 3\/4 inches high, and 8 inches deep. Net weight is 53 lbs.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What setbacks does the Xtreme line come in?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The Xtreme line is offered in 4, 6, 8, 10, and 12 inch setbacks. This listing is the 6 inch setback model.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I get at the engine bolts after the plate is installed?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The design gives you easy wrench access to the engine bolts from the side.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a hydraulic pump and controls?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"We don't list a pump, hoses, or helm controls with this part, so treat them as separate. Contact us and we'll help you figure out what your setup needs.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Seastar","offers":[{"title":"Default Title","offer_id":68079901835357,"sku":"116522","price":2251.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/116522XL.jpg?v=1795145269","url":"https:\/\/nvnmarine.com\/products\/seastar-xtreme-jp5060x-jack-plate-6in-setback","provider":"NVN Marine","version":"1.0","type":"link"}