Sea-Dog Waterproof Toggle Switch Cap 420479-1
Sea-Dog Waterproof Toggle Switch Cap 420479-1 — Product description
The Sea-Dog 420479-1 is a waterproof rubber cap that seals a toggle switch against spray and rain. It's made to fit the Sea-Dog 420465-1 toggle switch and threads on in place of the switch nut. Black, simple, cheap insurance for an open helm.
Water and electrical switches don't mix. This Sea-Dog waterproof cap slips over a toggle switch to keep spray, rain, and the odd wave out of the contacts, which is exactly what you want at an open helm or on a center console that sees weather. It's built to fit the Sea-Dog 420465-1 toggle switch, so the threads and lever clearance line up without any trimming or guesswork.
The boot is black rubber that flexes with the toggle, so you can flip the switch without pulling the cap off. You still get a clean, sealed feel every time. Over a season, that seal is what stops corrosion from creeping into a switch that runs your bilge pump, nav lights, or livewell.
Installation is about as simple as it gets. Thread it on in place of the switch nut, snug it down, and you're done. If you've got the matching 420465-1 switch on a boat that lives outside, this is cheap insurance against a dead circuit at the worst possible moment.
Key Features
- Waterproof rubber boot seals out spray, rain, and wash-down at the helm
- Made to fit the Sea-Dog 420465-1 toggle switch for correct thread and lever fit
- Flexes with the toggle so you can operate the switch with the cap installed
- Threads on in place of the switch nut, no extra hardware needed
- Black finish blends into most dash and console panels
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog Waterproof Toggle Switch Cap, Black |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 420479-1 |
| UPC | 035514420532 |
| Type | Waterproof Toggle Switch Cap |
| Fits | Sea-Dog 420465-1 Toggle Switch |
| Color | Black |
| Waterproof | Yes |
Frequently asked questions
Which switch does this cap fit?
It's made for the Sea-Dog 420465-1 toggle switch. Thread it on in place of the switch nut.
Is it actually waterproof?
Yes. The rubber boot seals over the toggle to keep spray and rain out of the switch contacts, which is what you want on an open helm or console.
Can I flip the switch with the cap on?
Yes. The boot flexes with the lever, so you operate the switch normally without removing the cap.
What color is it?
Black.
