Sea-Dog T-Handle Drain Plug 1-1/4 Inch Brass
Sea-Dog T-Handle Drain Plug 1-1/4 Inch Brass — Product description
The Sea-Dog T-Handle Drain Plug is the simple brass plug that keeps water where you want it. It fits a 1-1/4 inch drain, seals with a nitrile rubber gasket, and locks tight with a twist of the T-handle. Pull it at the ramp to drain the bilge or livewell, then twist it back in when you launch.
When it's time to drain the bilge or livewell, you want a plug that seals tight and pulls out easy. This Sea-Dog T-Handle Drain Plug does both. It fits a 1-1/4 inch drain hole, and the T-handle gives you plenty of grip to snug it down even with cold, wet hands.
The body is brass, so it won't rust out on you the way a plated plug will. The seal is nitrile rubber, which stays flexible and grabs the drain walls when you tighten the handle. Twist to expand it, and the plug locks in place. Twist the other way and it backs off so you can let the water run out at the ramp.
It's a simple piece of gear, but it's the kind of thing you don't want failing on you halfway across the lake. Keep a spare in the glovebox and you'll never be caught short at the launch.
Key Features
- Solid brass body resists corrosion and holds up to salt and fresh water
- Nitrile rubber seal expands against the drain walls for a watertight fit
- T-handle gives you the grip to tighten and loosen by hand, even when wet
- Fits a 1-1/4 inch diameter drain hole
- Twist-to-lock design pulls out easily to drain the bilge or livewell at the ramp
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog T-Handle Drain Plug, 1-1/4 Inch Diameter |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 520082-1 |
| UPC | 035514522090 |
| Diameter | 1-1/4 inch |
| Handle Type | T-Handle |
| Body Material | Brass |
| Seal Material | Nitrile Rubber |
Frequently asked questions
What size drain does this plug fit?
It fits a 1-1/4 inch diameter drain hole.
What is the plug made of?
The body is brass and the seal is nitrile rubber. The brass stands up to the marine environment and the nitrile rubber keeps a tight seal.
How does it seal?
Twist the T-handle to compress the nitrile rubber. The rubber expands against the drain walls and locks the plug in place. Twist the other way to release it and pull it out.
Can I use this in a livewell or bilge?
Yes. It works in any 1-1/4 inch drain, whether that's a bilge, a livewell, or a transom bailer.
