{"product_id":"sea-dog-sd-87-200a-circuit-breaker-48v-dc-830462","title":"Sea-Dog SD-87 200A Circuit Breaker 48V DC | 830462","description":"\u003cp class=\"nvn-hero\"\u003eThe Sea-Dog SD-87 is a 200-amp resettable circuit breaker built to protect high-current DC circuits on your boat. Manual reset, panel mount, rated to 48 volts DC, and sealed to IP66 so it shrugs off spray and washdown. It's the breaker you reach for on windlass, thruster, and inverter runs.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Sea-Dog SD-87 is a 200-amp resettable circuit breaker made for the heavy-current DC circuits that keep bigger boats running. Think windlass, bow thruster, inverter, or a high-output charger feed. These are the runs where a blown fuse leaves you stuck at the worst moment, and where you want a breaker you can reset by hand instead of digging through the spares box.\u003c\/p\u003e\n\u003cp\u003eIt's rated to 200 amps at up to 48 volts DC, so it covers 12-volt and 24-volt house systems with plenty of headroom, and it's right at home on 48-volt setups too. The manual reset is the part boaters like. If the circuit trips, you find the fault, then push the breaker back in. No fuse to replace, no fumbling in a locker with cold hands.\u003c\/p\u003e\n\u003cp\u003eSea-Dog built this one to take abuse. The housing is sealed to an IP66 protection rating, which means it holds up to dust and heavy spray, so you can mount it in an engine room, a lazarette, or anywhere it'll catch the occasional washdown. It carries the marine and safety standards that matter for this kind of hardware: SAE J553, ABYC-E11, UL1077, and SAE J1171. If you're wiring to ABYC, this is the right class of part.\u003c\/p\u003e\n\u003cp\u003eInstallation is panel mount. The power connections are 5\/16 inch-18 stud terminals, so you're landing proper ring terminals and torquing them down, not trusting a friction fit on a 200-amp run. That's how it should be at this current. The black plastic housing keeps things low-profile and won't corrode like a bare metal case would.\u003c\/p\u003e\n\u003cp\u003eOne thing to know: this is a single breaker, sold on its own. Size it to your circuit. The breaker should protect the wire, so match the 200-amp rating to your cable gauge and the load it feeds. Not sure what you need? Give us a shout and we'll help you spec it against your windlass or thruster draw. Getting the breaker, the wire, and the load matched is the whole game with DC protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e200 amp rating protects high-current DC circuits like windlass, thruster, and inverter feeds\u003c\/li\u003e\n  \u003cli\u003eManual reset clears a trip by hand, no fuse to find and replace\u003c\/li\u003e\n  \u003cli\u003eRated to 48 volts DC, covers 12V and 24V house systems with headroom\u003c\/li\u003e\n  \u003cli\u003eIP66 sealed housing holds up to dust and heavy washdown spray\u003c\/li\u003e\n  \u003cli\u003eMeets SAE J553, ABYC-E11, UL1077, and SAE J1171 standards for marine wiring\u003c\/li\u003e\n  \u003cli\u003e5\/16 inch-18 stud terminals land proper ring terminals at high current\u003c\/li\u003e\n  \u003cli\u003ePanel-mount design in a low-profile black plastic housing that won't corrode\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Sea-Dog reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat circuits is a 200 amp breaker meant for?\u003c\/summary\u003e\n    \u003cp\u003eHigh-draw DC runs. Windlasses, bow and stern thrusters, inverters, and high-output charger feeds are the usual candidates. Size the breaker to protect the wire feeding that load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it on a 12 or 24 volt system?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's rated to 48 volts DC, so it works on 12-volt and 24-volt marine systems with plenty of margin, and on 48-volt systems too.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does manual reset mean?\u003c\/summary\u003e\n    \u003cp\u003eIf the breaker trips on an overload, it stays open until you push it back in by hand. You find and fix the fault first, then reset. There's no fuse to carry as a spare or swap out.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it waterproof?\u003c\/summary\u003e\n    \u003cp\u003eIt's sealed to an IP66 rating, so it stands up to dust and strong jets of water like a washdown. That covers engine rooms, lazarettes, and spray-prone spots. It isn't rated for full submersion.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size wire terminals does it use?\u003c\/summary\u003e\n    \u003cp\u003eThe power studs are 5\/16 inch-18. Use properly sized ring terminals crimped to your cable and torque them down. Friction connections don't belong on a 200-amp circuit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it meet ABYC standards?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's built to ABYC-E11 along with SAE J553, UL1077, and SAE J1171, so it's the right class of part for an ABYC-compliant install.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eSea-Dog SD-87 200 Amp Resettable Circuit Breaker, 48V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSea-Dog\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e830462\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e035514830638\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSD-87\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e200 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e48 Volt DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReset Type\u003c\/th\u003e\n\u003ctd\u003eManual Reset\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003ePanel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminal\u003c\/th\u003e\n\u003ctd\u003e5\/16 Inch-18 Stud Terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eSAE J553 \/ ABYC-E11 \/ UL1077 \/ SAE J1171\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProtection Rating\u003c\/th\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What circuits is a 200 amp breaker meant for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"High-draw DC runs. Windlasses, bow and stern thrusters, inverters, and high-output charger feeds are the usual candidates. Size the breaker to protect the wire feeding that load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it on a 12 or 24 volt system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's rated to 48 volts DC, so it works on 12-volt and 24-volt marine systems with plenty of margin, and on 48-volt systems too.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does manual reset mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"If the breaker trips on an overload, it stays open until you push it back in by hand. You find and fix the fault first, then reset. There's no fuse to carry as a spare or swap out.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it waterproof?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's sealed to an IP66 rating, so it stands up to dust and strong jets of water like a washdown. That covers engine rooms, lazarettes, and spray-prone spots. It isn't rated for full submersion.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size wire terminals does it use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The power studs are 5\/16 inch-18. Use properly sized ring terminals crimped to your cable and torque them down. Friction connections don't belong on a 200-amp circuit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it meet ABYC standards?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's built to ABYC-E11 along with SAE J553, UL1077, and SAE J1171, so it's the right class of part for an ABYC-compliant install.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":45067119788125,"sku":"2008937","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_a5bd25bc-130b-4c4b-a3d4-1c28a8738f55.png?v=1789658701","url":"https:\/\/nvnmarine.com\/products\/sea-dog-sd-87-200a-circuit-breaker-48v-dc-830462","provider":"NVN Marine","version":"1.0","type":"link"}