{"product_id":"sea-dog-nylon-garboard-drain-and-plug","title":"Sea-Dog Nylon Garboard Drain and Plug","description":"\u003cp class=\"nvn-hero\"\u003eThe Sea-Dog garboard drain and plug is the simple fitting that lets you drain the bilge when your boat's on the trailer. Nylon body, a 2-3\/16 inch flange, an integral 1-1\/8 inch acetyl drain tube, and a built-in O-ring that seals tight. Corrosion-proof and ready to install.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eEvery boat needs a way to drain the water that collects in the bilge, and the Sea-Dog garboard drain and plug is the simple, reliable fitting that does it. It mounts down at the garboard, the lowest point of the transom, so when you pull the plug on the trailer the water runs right out. Screw the plug back in before you launch and you're sealed up tight.\u003c\/p\u003e\n\u003cp\u003eThe body is nylon with a 2-3\/16 inch flange, and it carries an integral 1-1\/8 inch acetyl drain tube that passes through the transom. There's an O-ring built right into the plug, so you get a clean seal without fussing with extra gaskets or thread tape. Nylon and acetyl don't corrode, so it holds up in salt water and fresh water season after season.\u003c\/p\u003e\n\u003cp\u003eIt's a small part that matters. A seized or leaking drain plug is the kind of headache nobody wants at the ramp, and this one just works. Keep a spare in the glovebox and you'll never be stuck.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e2-3\/16 inch nylon flange sits flush against the transom for a clean, secure mount\u003c\/li\u003e\n  \u003cli\u003eIntegral 1-1\/8 inch acetyl drain tube passes through the hull for reliable bilge drainage\u003c\/li\u003e\n  \u003cli\u003eBuilt-in O-ring on the plug seals tight without extra gaskets or thread tape\u003c\/li\u003e\n  \u003cli\u003eNylon and acetyl construction won't corrode or seize in salt or fresh water\u003c\/li\u003e\n  \u003cli\u003eThreaded plug backs out by hand to drain water on the trailer, then screws back in before launch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Sea-Dog reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is a garboard drain used for?\u003c\/summary\u003e\n    \u003cp\u003eIt sits at the garboard, the lowest point of the transom, so you can drain rainwater and bilge water out of the boat while it's on the trailer or stored on the hard. Pull the plug to drain, screw it back in before you launch.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is this drain plug made of?\u003c\/summary\u003e\n    \u003cp\u003eThe body and flange are nylon, the drain tube is acetyl, and there's an O-ring integrated into the plug for the seal. All of it is corrosion-proof, so it works in both salt water and fresh water.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size is the flange and drain tube?\u003c\/summary\u003e\n    \u003cp\u003eThe flange measures 2-3\/16 inch in diameter and the integral drain tube is 1-1\/8 inch. The tube passes through the transom and the flange seats against the outside of the hull.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need thread tape or a separate gasket to seal it?\u003c\/summary\u003e\n    \u003cp\u003eNo. The O-ring is built right into the plug, so it seals against the drain tube on its own. You just thread the plug in by hand and snug it down.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eGarboard Drain And Plug; 2-3\/16 Inch Flange Diameter; Nylon; With Integral 1-1\/8 Inch Acetyl Drain Tube and Integral O-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSea-Dog\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e520050-1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e035514520546\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eGarboard Drain and Plug\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFlange Diameter\u003c\/th\u003e\n\u003ctd\u003e2-3\/16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDrain Tube Diameter\u003c\/th\u003e\n\u003ctd\u003e1-1\/8 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDrain Tube Material\u003c\/th\u003e\n\u003ctd\u003eAcetyl\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eO-Ring\u003c\/th\u003e\n\u003ctd\u003eIntegral\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is a garboard drain used for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It sits at the garboard, the lowest point of the transom, so you can drain rainwater and bilge water out of the boat while it's on the trailer or stored on the hard. Pull the plug to drain, screw it back in before you launch.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is this drain plug made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The body and flange are nylon, the drain tube is acetyl, and there's an O-ring integrated into the plug for the seal. All of it is corrosion-proof, so it works in both salt water and fresh water.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size is the flange and drain tube?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The flange measures 2-3\/16 inch in diameter and the integral drain tube is 1-1\/8 inch. The tube passes through the transom and the flange seats against the outside of the hull.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need thread tape or a separate gasket to seal it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The O-ring is built right into the plug, so it seals against the drain tube on its own. You just thread the plug in by hand and snug it down.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":45097119547485,"sku":"2010881","price":9.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_1d6a3861-7e2c-4495-bffd-e782d48cee68.jpg?v=1790323234","url":"https:\/\/nvnmarine.com\/products\/sea-dog-nylon-garboard-drain-and-plug","provider":"NVN Marine","version":"1.0","type":"link"}