Sea-Dog Kill Switch Lanyard, Coiled | 420489-1
Sea-Dog Kill Switch Lanyard, Coiled | 420489-1 — Product description
Lost or stretched-out kill switch cord? This is the replacement coil. It clips your engine cut-off switch to your wrist or PFD and springs back to 15 inches when you're not moving around. Stretches to a full 48 inches so you can reach the throttle and the wheel and still stay tethered. Lanyard only, so grab it if your switch is fine and the cord's just worn.
If your engine cut-off cord has gone brittle, stretched out, or just walked off the boat with last season's crew, this is the fix. It's the Sea-Dog replacement coil lanyard, and it does one job well. It tethers you to the kill switch so the motor shuts down the second you leave the helm.
Coiled, it sits at a tidy 15 inches so it isn't dragging around the console. Pull against it and it stretches to a full 48 inches, which is plenty of reach to work the throttle, grab the wheel, or lean over to clear a line. Step back and it coils right up again.
One thing to be clear on. This is the lanyard only. There's no kill switch in the package. It's built to replace the cord on Sea-Dog kill switches 420488 and 420486, so if your switch is still good and you just need a fresh cord, you're in the right spot.
Key Features
- Coils down to 15 inches, stretches to 48 inches for full helm reach
- Universal coiled design tethers the operator to the engine cut-off switch
- Direct replacement cord for Sea-Dog kill switches 420488 and 420486
- Lanyard only, no kill switch included
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog Universal Boat Kill Switch Lanyard |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 420489-1 |
| UPC | 035514423199 |
| Coiled Length | 15 in |
| Stretched Length | 48 in |
| Type | Replacement Kill Switch Lanyard |
| Includes | Lanyard only, no kill switch |
| Fits | Sea-Dog kill switches 420488 and 420486 |
Frequently asked questions
Does this come with the kill switch?
No. This is the lanyard only. It's a replacement cord for a switch you already have, built for Sea-Dog kill switches 420488 and 420486.
How long is it?
It coils down to 15 inches and stretches out to a full 48 inches, so you get reach across the helm without a loose cord hanging around.
What's a kill switch lanyard for?
It clips the engine cut-off switch to you, usually your wrist or PFD. If you get thrown from the helm, the cord pulls the switch and the motor shuts off.
Will it fit my kill switch?
It's designed for Sea-Dog kill switches 420488 and 420486. The universal coiled style works with similar clip-style cut-off switches too.
