Sea-Dog Chrome Brass Cable Outlet, 1/4 In RG58
Sea-Dog Chrome Brass Cable Outlet, 1/4 In RG58 — Product description
Need to run an antenna cable below deck without leaving a sloppy hole? The Sea-Dog cable outlet passes a 1/4 inch RG58 coax lead cleanly through your deck or cabin top, then seals it down with a single compression fitting and a knurled nut. Chrome-plated brass, so it looks sharp and shrugs off salt air.
Running a VHF or antenna coax down through the deck always comes down to one question. How do you get the cable below without water following it in? That's exactly what this Sea-Dog cable outlet solves. It's a thru-deck pass-through sized for 1/4 inch RG58 coax, the lead you'll find on most marine antennas.
The fitting is a single compression design. You feed the cable through, then snug down the knurled nut by hand to clamp around the jacket and close things up. No crimping, no special tools. It mounts to a deck, a cabin top, or a bulkhead wherever you need the cable to drop inside.
The body is chrome-plated brass, so it holds up to spray and sun far better than a plastic fitting and keeps a clean look at the helm or on the foredeck. It's a small part. But it's the kind of detail that keeps a rig looking finished and your wiring dry.
Key Features
- Chrome-plated brass body stands up to salt spray and sun far better than a plastic fitting
- Sized for 1/4 inch RG58 coax, the standard lead on most marine antennas
- Single compression design clamps the cable jacket for a tight, weather-resistant seal
- Knurled nut hand-tightens, so there's no crimping or special tools needed
- Mounts through a deck, cabin top, or bulkhead
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog Chrome Plated Brass Cable Outlet, 1/4 Inch RG58 |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 426040-1 |
| UPC | 035514426015 |
| Material | Chrome Plated Brass |
| Finish | Silver |
| Cable Compatibility | 1/4 Inch RG58 |
| Fitting Type | Single Compression |
| Hardware | Knurled Nut |
Frequently asked questions
What size cable does this fit?
It's made to pass 1/4 inch RG58 coax, the lead used on most marine VHF and radio antennas.
What is the body made of?
Chrome-plated brass. That gives you a corrosion-resistant fitting with a bright, finished look that holds up to salt air.
How does it seal around the cable?
It uses a single compression fitting. You tighten the knurled nut by hand and it clamps down on the cable jacket to keep water out.
Do I need any tools to install it?
No. The knurled nut tightens by hand, so there's no crimping or special tooling involved.
