Sea-Dog Canvas Snap Stud, #10 Screw 5/8 In, 6-Pack
Sea-Dog Canvas Snap Stud, #10 Screw 5/8 In, 6-Pack — Product description
Sea-Dog canvas snap studs are the screw-in base half of a two-part snap fastener, the part that mounts to your deck or transom so a cover can snap right down onto it. This pack gives you six studs, each with a 5/8 inch #10 sheet metal screw built in. Simple, standard marine snap hardware.
If you've ever popped a boat cover, bimini boot, or spray dodger on and off, you know the snap. Half of that snap lives on the fabric. The other half, the stud, screws into the boat. That's what this is. Sea-Dog's canvas snap stud is the fixed base that your cover's socket presses onto, and it comes six to a pack so you can space them out along a rail or coaming.
Each stud rides on a 5/8 inch #10 sheet metal screw, so you drive it straight into fiberglass, wood, or thin metal without a separate fastener. It's the standard snap size you'll find on most factory covers, so replacement studs and new add-on points line up with what's already on the boat. Drill a pilot hole, drive it home, and you're set.
Reach for these when you're adding tie-down points for a cover, replacing studs that have corroded or spun loose, or building a snap-on canvas project from scratch. Six in a pack covers most small jobs. Grab a couple packs if you're doing a full cover.
Key Features
- 5/8 inch #10 sheet metal screw built into each stud, so it drives straight into fiberglass, wood, or thin metal
- Six studs per pack, enough for most small cover and canvas jobs
- Standard marine snap size that matches the sockets on most factory boat covers and biminis
- Screw-stud base half of a two-part snap fastener, mounts to the boat while the socket stays on the fabric
- Sea-Dog marine deck hardware
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog Canvas Snap Stud with #10 Sheet Metal Screw, 5/8 Inch (6-Pack) |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 299113-1 |
| UPC | 035514299589 |
| Fastener Type | Canvas Snap Stud (screw-stud base) |
| Screw Type | #10 Sheet Metal Screw |
| Screw Length | 5/8 Inch |
| Quantity | 6 per pack |
| Manufacturer | Sea-Dog Line |
Frequently asked questions
What part of the snap is this?
It's the stud, the base half that screws into your boat. The matching socket half lives on your cover or canvas and snaps down onto it.
How many studs come in a pack?
Six. That's usually enough to add or replace the snap points on a small cover or a section of canvas.
What size screw do they use?
Each stud has a 5/8 inch #10 sheet metal screw, so you can drive it into fiberglass, wood, or thin metal with a pilot hole.
Will these match the snaps already on my cover?
They're the standard marine snap size used on most factory covers and biminis, so the sockets on your canvas should press right on. If you're unsure, measure an existing stud before ordering.
