Sea-Dog Bow Anchor Roller Wheel 3-Inch | 328079-1
Sea-Dog Bow Anchor Roller Wheel 3-Inch | 328079-1 — Product description
Lost the rubber roller off your bow anchor mount, or worn one down to the axle? This is the Sea-Dog replacement wheel, 3-inch black natural rubber, sold as a single. It drops into a standard bow roller bracket and gives your anchor rode a smooth surface to ride over on the way up and down.
The rubber roller at the tip of your bow mount takes more abuse than almost anything else up front. It's the piece your anchor rode drags across every time you drop the hook and every time you haul it back up. Grit, sun, and salt wear it down. Eventually it splits, flat-spots, or just wears through, and your chain starts chewing on bare metal. This is the Sea-Dog replacement wheel that fixes that.
It's a 3-inch diameter roller in black natural rubber, sold as a single wheel. The overall size is 3-7/16 inches by 3 inches. Rubber is the right call here because it's kind to your rode. It won't gouge the galvanizing off your chain or fray three-strand nylon the way a hard plastic or bare metal roller can.
Swapping it is a ten-minute job on most boats. Pull the roller pin or axle bolt out of your bow roller bracket, slide the old wheel off, drop the new one in, and reinstall the pin. No special tools, no adapters. Just check that your existing bracket takes a 3-inch wheel before you order, since bow rollers come in a few sizes.
Who's this for? Anyone with a bow roller assembly that's lost or worn its roller. It's a wear part, plain and simple. If you trailer your boat and the roller has taken years of the anchor bouncing against it, or you've got a cruiser that anchors out most nights, this is the spare to keep on the shelf.
One thing to know: this is the wheel only. It doesn't come with a new pin, bracket, or hardware. If your axle pin is corroded or bent, plan to replace that too. And if you're not sure what diameter your current roller is, measure it before ordering. We're happy to help you sort out the fit if you give us a call.
Key Features
- 3-inch diameter roller in natural rubber, sized to drop into a standard bow roller bracket
- Black natural rubber surface that's easy on galvanized chain and three-strand or braided rode
- Overall size 3-7/16 in. x 3 in., a direct-fit spare for a worn or missing bow roller
- Sold as a single wheel, the exact wear part your bow roller assembly needs
- Genuine Sea-Dog replacement, matched to Sea-Dog bow roller hardware
- Simple swap on the existing pin or axle bolt, no adapters or modifications needed
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog Bow Anchor Roller Replacement Wheel, 3-Inch Black Rubber |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 328079-1 |
| UPC | 035514328357 |
| Diameter | 3 in. |
| Overall Dimensions | 3-7/16 in. x 3 in. |
| Material | Natural Rubber |
| Color | Black |
| Mounting Location | Bow |
| Quantity Per Package | Single |
| Product Type | Replacement Anchor Roller Wheel |
Frequently asked questions
What size is this roller wheel?
It's a 3-inch diameter wheel with an overall size of 3-7/16 inches by 3 inches, molded in black natural rubber and sold as a single.
Will it fit my bow roller?
It fits standard bow roller brackets built for a 3-inch wheel. Bow rollers come in a few sizes, so measure your current roller or the gap in your bracket before ordering. Give us a call if you're not sure.
Does it come with a pin or mounting hardware?
No, this is the wheel only. It reuses your existing axle pin and bracket. If your pin is corroded or bent, plan to replace that separately.
Why rubber instead of a metal or plastic roller?
Rubber is easier on your rode. It won't scrape the galvanizing off your chain or chew up nylon line the way a harder roller can, and it runs quieter over the bow.
Is this a genuine Sea-Dog part?
Yes. It's the Sea-Dog replacement wheel, part number 328079-1, made to match Sea-Dog bow roller hardware.
How do I know when mine needs replacing?
When the rubber splits, develops flat spots, or wears down far enough that your chain or rode is riding on the bracket instead of the wheel, it's time for a new one.
