Sea-Dog 30A Watertight AGC Inline Fuse Holder
Sea-Dog 30A Watertight AGC Inline Fuse Holder — Product description
Sea-Dog's AGC watertight inline fuse holder gives you a clean, protected way to fuse a 30-amp circuit right at the source. It ships pre-wired with 10-gauge leads and a 30-amp AGC fuse already installed, so you can wire it in and go. The snap-tight PVC housing keeps spray and moisture off the fuse.
If you've ever had a fuse holder corrode shut in a bilge or a splashy console, you know why watertight matters. This Sea-Dog inline holder wraps the fuse in a sealed PVC body, so salt spray and moisture stay out and the connection stays clean season after season.
It comes pre-wired with 10-gauge leads, which handle a 30-amp load without the wire running hot. The holder snaps apart by hand when you need to swap the fuse, no tools and no cutting. Crimp or butt-splice the leads into your circuit, seal the joints, and you're done.
It's a good fit for pumps, lights, electronics, and accessory runs where you want the fuse close to the battery or the load. A 30-amp AGC glass fuse is already in place, so it's ready to wire in out of the package. One holder per pack.
Key Features
- AGC glass fuse format, so replacements are easy to find at any marine or auto store
- 10-gauge pre-wired leads handle a 30-amp circuit without overheating
- Watertight PVC housing seals out spray and moisture in bilges and open consoles
- Snap-tight connection lets you change the fuse by hand, no tools needed
- 30-amp AGC fuse included, so it's ready to wire in out of the package
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog AGC Watertight Inline Fuse Holder |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 420555-1 |
| UPC | 035514420686 |
| Fuse Type | AGC |
| Wire Gauge | 10 Gauge |
| Amperage | 30 Ampere |
| Connection Type | Snap Tight |
| Fuse Included | Yes |
| Housing Material | PVC |
| Water Resistance | Watertight |
| Quantity | Single |
Frequently asked questions
Does this fuse holder come with a fuse?
Yes. A 30-amp AGC glass fuse is already installed, so you can wire it in right out of the package.
What size wire does it use?
It's pre-wired with 10-gauge leads, sized for a 30-amp circuit.
Is it really watertight?
The PVC housing seals around the fuse to keep spray and moisture out, which is why it holds up in bilges and open consoles better than an open holder. Keep the wire connections sealed too for the best protection.
Do I need tools to change the fuse?
No. The holder uses a snap-tight connection, so it pulls apart by hand to swap the fuse and snaps back together.
