Sea-Dog 20A Inline Resettable Circuit Breaker | 420842-1
Sea-Dog 20A Inline Resettable Circuit Breaker | 420842-1 — Product description
The Sea-Dog inline resettable circuit breaker is the simple way to protect a 20 amp DC circuit. It trips on a short or overload, then resets with a push of the button. No spare fuses to carry.
Every DC circuit on your boat needs protection, and the Sea-Dog inline resettable circuit breaker is a simple way to give it. Rated at 20 amps, it trips when a wire shorts or a pump stalls, then resets with a push of the button instead of sending you digging for a spare fuse.
It's built to live out there. The nylon and polycarbonate housing shrugs off spray and damp bilge air, and the brass #10-32 studs and nuts give you a solid, corrosion-resistant connection. Wire it inline on accessory runs like bilge pumps, livewell pumps, lights, or electronics. It's rated for 12 volt AC and 24 volt DC circuits.
It's compact, roughly 1-5/16 by 1-3/8 by 1-7/16 inches, so it tucks in behind a panel or under the console without eating up space. And the manual reset button keeps you in control. Push it back in and you're running again.
Key Features
- 20 amp rating protects DC accessory circuits from shorts and overloads
- Manual reset button, push to restore power, no spare fuses to carry
- Nylon and polycarbonate housing stands up to spray and bilge damp
- Brass #10-32 studs and nuts for a solid, corrosion-resistant connection
- Rated for 12 volt AC and 24 volt DC circuits
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog Inline Resettable Circuit Breaker, 20 Amp |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 420842-1 |
| UPC | 035514420730 |
| Amperage | 20 Ampere |
| Voltage Rating | 12 Volt AC / 24 Volt DC |
| Reset Type | Manual Reset Button |
| Width | 1-5/16 Inch |
| Depth | 1-3/8 Inch |
| Height | 1-7/16 Inch |
| Housing Material | Nylon/Polycarbonate |
| Terminals | Brass #10-32 Studs and Nuts |
| Sold As | Single |
Frequently asked questions
How do I reset it after it trips?
Just push the manual reset button back in. Once the fault that tripped it is cleared, power flows again. No tools, no spare fuses.
What amperage is this breaker?
20 amps. Match it to the circuit you're protecting so it trips before the wire or device does.
What voltage can it handle?
It's rated for 12 volt AC and 24 volt DC circuits, which covers typical DC accessory wiring on most boats.
How does it wire in?
It goes inline using the brass #10-32 studs and nuts on each end. It's compact enough to sit behind a panel or under the console.
Is this a single breaker?
Yes, this is sold as a single breaker.
