Sea-Dog 18 AWG Yellow Primary Wire 250 ft
Sea-Dog 18 AWG Yellow Primary Wire 250 ft — Product description
This Sea-Dog 18 AWG yellow primary wire comes on a 250 foot spool, so you've got plenty of length for a full boat rewire or a long list of small jobs. It's single-conductor wire in a color that's easy to track at the helm, in the engine room, and behind the dash.
Every boat ends up with a pile of small wiring jobs. A new bilge pump float switch, a set of courtesy lights, a gauge that needs a fresh feed. This Sea-Dog 18 AWG primary wire in yellow is built for exactly that kind of work, and the 250 foot spool means you won't be rationing it.
It's single-conductor primary wire, which is the building block for most low-current circuits aboard. Run it from a fuse panel to a switch, from a switch to a light, or from a sensor back to a gauge. At 18 AWG it's sized for light-duty loads like indicator lamps, small accessories, and signal or control circuits. It isn't meant for heavy loads like windlasses, bow thrusters, or trolling motors, so check the amp draw and the run length before you pick a gauge. When in doubt, size up.
Why yellow? Color coding saves time and headaches. On most boats, yellow is the go-to for bilge pump feeds and other dedicated circuits, though your boat's existing harness may follow its own scheme. Pick one color per circuit, stick with it, and label both ends. Six months from now, when you're chasing a fault in the dark with a flashlight in your teeth, you'll be glad you did.
The long spool is the real value here. A 250 foot roll covers a whole project, whether that's rewiring a center console, adding an accessory circuit to a pontoon, or building a new set of nav lights. You cut what you need and keep the rest for the next job. That beats buying short lengths every time something comes up, and it keeps you from splicing a run because you came up a few feet short.
A few install habits that pay off. Use proper crimp terminals and a quality crimper, not pliers. Seal your connections against moisture, and support the wire with clamps so it doesn't chafe against edges or flex at a connection. Protect every circuit with a correctly sized fuse or breaker, rated for the wire, not the load. And keep runs as short and direct as you can to limit voltage drop.
We're an authorized Sea-Dog dealer, so you're getting the real part, MPN 8018034. If you're unsure whether 18 AWG is right for your circuit, send our crew the details and we'll help you work it out.
Key Features
- 18 AWG gauge, sized for light-duty accessory, indicator, and control circuits
- 250 foot spool, enough length for a full rewire or many small jobs
- Yellow insulation makes circuit tracing and labeling easier
- Single-conductor primary wire, cut to the exact length you need
- Sea-Dog part number 8018034, backed by an authorized reseller
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog 18 AWG Yellow Primary Wire - 250' |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 8018034 |
| UPC | 035514802260 |
| Wire Gauge | 18 AWG |
| Color | Yellow |
| Length | 250 ft |
| Wire Type | Primary Wire |
| Category | Electrical | Wire |
Frequently asked questions
What is primary wire used for on a boat?
Primary wire is single-conductor wire used to carry power and signals between components, like a fuse panel, a switch, a light, or a gauge. This one is 18 AWG, so it fits light-duty circuits.
How long is this spool?
It's a 250 foot spool, per the product title and Sea-Dog part number 8018034.
What gauge is this wire?
It's 18 AWG. That's a good fit for small loads like indicator lights and control or signal circuits. For higher current or longer runs, you'll want a heavier gauge.
What color is this wire?
Yellow. Many boaters use yellow for dedicated circuits like bilge pumps, but check your boat's existing wiring scheme before you commit to a color.
Can I use 18 AWG wire for a trolling motor or windlass?
No. Those are high-current loads and need much heavier cable. 18 AWG is for light-duty circuits only.
What's the manufacturer part number?
The Sea-Dog manufacturer part number is 8018034 and the UPC is 035514802260.