Sea-Dog 18 AWG Black Primary Wire 250'
Sea-Dog 18 AWG Black Primary Wire 250' — Product description
This Sea-Dog 18 AWG black primary wire gives you 250 feet of single conductor wire on one spool. It's a practical pick for low-current circuits like lighting, indicators, and small electronics, and the bulk length means fewer splices on bigger rewiring jobs.
If you've ever pulled a single wire through a boat and ran out halfway to the bow, you'll appreciate a big spool. This Sea-Dog 18 AWG black primary wire comes in a 250 foot length, so you can rig up a whole boat's worth of small circuits without stopping to splice in short pieces.
Primary wire is single conductor, which makes it the go-to for point-to-point runs. Think courtesy lights, indicator lamps, switch panel jumpers, small electronics feeds, bilge float switch leads, and the countless little connections that pile up behind a helm. Black is the traditional choice for negative or ground runs, so it's easy to keep your wiring neat and consistent when you're tracing a problem two seasons from now.
18 AWG is a light-duty gauge. It suits low-current loads, and it isn't the wire to grab for a windlass, a trolling motor, or anything that pulls serious amps. Before you cut, check the load on the circuit and the length of the run, then match them against a wire ampacity chart. Longer runs lose voltage, so a gauge that works at three feet may be too small at twenty-five. When in doubt, go one size up.
A 250 foot spool is a smart buy for a few kinds of jobs. Rewiring an older boat, building out a new helm, or running a long list of accessories on a project boat all burn through wire faster than you'd think. Buying it in bulk means you cut exactly what you need, keep the leftover on the shelf, and don't make a second trip when you find one more circuit to add.
Pair it with proper crimp terminals, heat shrink, and a good ratcheting crimper. A solid connection matters more than almost anything else on a boat wiring job, and it's the part most likely to fail if rushed. Label both ends as you go. You'll thank yourself later.
This listing is for one 250 foot spool of black 18 AWG wire. Terminals, connectors, and tools are sold separately.
Key Features
- 18 AWG gauge suits low-current circuits like courtesy lights, indicators, and small electronics
- 250 foot spool gives you enough wire to rig a whole boat without splicing short pieces
- Single conductor primary wire for clean point-to-point runs
- Black insulation is the usual pick for negative and ground runs
- Bulk length means you cut exactly what you need and save the rest for the next project
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog 18 AWG Black Primary Wire - 250' |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 8018014 |
| UPC | 035514802062 |
| Wire Gauge | 18 AWG |
| Color | Black |
| Length | 250 ft |
| Wire Type | Primary Wire |
| Category | Electrical | Wire |
Frequently asked questions
What size is this wire?
It's 18 AWG primary wire in a 250 foot length.
What color is it?
Black. It's a single color spool, which makes it handy for ground and negative runs.
Is this single conductor or multi-conductor?
Single conductor primary wire. If you need a pair or three runs bundled together, look at duplex or triplex wire instead.
How do I know if 18 AWG is big enough for my circuit?
Check the amp load and the total length of the run, then compare them to a wire ampacity chart. Longer runs need heavier wire to avoid voltage drop. If you're close, step up one gauge.
What's the manufacturer part number?
The Sea-Dog part number is 8018014.
Are terminals or connectors included?
No. You'll get one spool of wire. Crimp terminals, heat shrink, and tools are sold separately.