Sea-Dog 14 AWG Red Primary Wire, 250 Foot Length
Sea-Dog 14 AWG Red Primary Wire, 250 Foot Length — Product description
Sea-Dog 14 AWG red primary wire gives you 250 feet of single conductor to work with. That's enough for a full rewire or a handful of new circuits without running short mid-job. Red makes positive runs easy to spot later.
If you've ever stood in the bilge with two feet of wire left and three feet to go, you already know why the long length matters. This Sea-Dog 14 AWG red primary wire comes in a 250 foot length, so you can pull a full run without splicing or hunting for a second piece.
It's single color primary wire, and red is the usual choice for positive feeds. Use it for lighting circuits, bilge pump feeds, accessory power, small electronics, and other low to moderate draw runs around the boat. Pair it with a different color for the return side and your wiring stays easy to trace when something needs service two seasons from now.
Gauge matters, so pick it on purpose. 14 AWG suits plenty of everyday branch circuits, but the right size depends on the load and how long the run is. Longer runs lose more voltage, which is why we always suggest checking an ampacity and voltage drop chart for your circuit before you cut anything. If the load is heavy or the run is long, step up to a heavier gauge. When in doubt, go bigger.
Planning matters with a spool this size. Measure the route from the source to the load, add some slack for service loops and turns, then cut. Running a little long beats coming up short, and a 250 foot length gives you room to do it right. Label both ends as you go so you're not guessing later.
A few install habits pay off here. Cut clean, strip only what your terminal needs, and crimp with the right size connector for 14 AWG. Seal the connection and support the wire along its path so it doesn't chafe against hull edges or bulkheads. Good terminations do more for reliability than the wire itself.
This listing is for the red wire in the 250 foot length, Sea-Dog part number 8014024. Other colors and lengths are sold as their own items, so double check the color and length before you order. Questions about sizing a circuit? Our crew is happy to talk it through.
Key Features
- 14 AWG conductor size, a common choice for everyday branch circuits
- 250 foot length, enough for a full rewire or several new runs without splicing
- Red insulation color, easy to identify as a positive feed
- Single conductor primary wire, so you pair it with a second color for the return
- Sea-Dog part number 8014024 for easy reordering
- Sold per 250 foot length, other colors and lengths listed separately
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog 14 AWG Red Primary Wire - 250' |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 8014024 |
| UPC | 035514801638 |
| Wire Gauge | 14 AWG |
| Color | Red |
| Length | 250 ft |
| Wire Type | Primary wire |
| Category | Electrical | Wire |
Frequently asked questions
What gauge and length is this wire?
It's 14 AWG in a 250 foot length, in red. The Sea-Dog part number is 8014024.
Is this single conductor or multi conductor wire?
It's single color primary wire. You'll want a second color, such as a different one for the return side, to complete a circuit.
What is red wire usually used for?
Red is the usual color for positive feeds. Using it consistently makes the circuit easier to trace and service later.
How do I know if 14 AWG is big enough for my circuit?
It depends on the current the device draws and the length of the run. Check an ampacity and voltage drop chart for your load. If you're close to the limit or the run is long, go up a size.
Can I get this wire in other colors or lengths?
Yes, other colors and lengths are listed as separate items. Make sure the color and the 250 foot length match what you need before ordering.
Does the wire come with terminals or connectors?
No. This listing is for the wire only. Terminals, connectors, and heat shrink are sold separately.