Sea-Dog 14 AWG Brown Primary Wire 100 ft | 8014072
Sea-Dog 14 AWG Brown Primary Wire 100 ft | 8014072 — Product description
The Sea-Dog 14-gauge primary wire is the everyday hookup wire you reach for when you're wiring in an accessory or running a lighting circuit. Tinned copper conductor, PVC insulation, brown jacket, and a full 100-foot spool so you've got plenty on hand.
The Sea-Dog 14-gauge primary wire is the everyday hookup wire you reach for when you're wiring in a new accessory, running a lighting circuit, or replacing a corroded run you finally got tired of fighting. It comes on a 100-foot spool, so there's plenty on hand for a full weekend of rigging without a second trip to the counter.
What matters most on a boat is the conductor. This one's tinned copper, and that tinning is the whole point. Bare copper corrodes fast in the salt-air, damp-bilge world your wiring actually lives in. The tin coating shrugs that off, keeps the strands bright, and holds a clean crimp for years instead of turning green and going high-resistance on you. If you've ever chased a dim nav light back to a chalky green wire end, you know exactly why this matters.
It's stranded, not solid, so it flexes and takes vibration the way marine wiring has to. Boats pound, engines shake, and solid wire work-hardens and cracks. Stranded 14 AWG bends around a stringer, feeds through a chase, and lands on a terminal block without a fight. The PVC insulation is the standard tough jacket that stands up to abrasion and the odd fuel or oil splash down in the bilge.
The brown jacket is there to keep you sane. Color-coding your runs means the next time you're upside down under the console tracing a fault, you can tell one circuit from another at a glance. Fourteen gauge is a common size for accessory and lighting loads, pumps, and shorter runs where you don't need the heavier stuff.
Buy the color you need for the circuit you're building, and grab a matching crimp connector set while you're at it. If you're not sure what gauge a given run calls for, tell us the load and the distance and we'll point you right.
Key Features
- 14 AWG stranded conductor, sized for accessory, lighting, and pump circuits
- Tinned copper strands resist salt-air and bilge corrosion, holding a clean crimp for years
- PVC insulation jacket stands up to abrasion and the occasional fuel or oil splash
- Stranded construction flexes with hull vibration where solid wire work-hardens and cracks
- Brown jacket makes it easy to color-code circuits behind the console
- 100-foot spool gives you plenty for a full rigging job or several smaller runs
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Stranded Conductor; 14 Gauge; Brown; 100 Foot Spool; Tinned Copper Conductor/ PVC Insulation |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 8014072 |
| UPC | 035514801430 |
| Wire Gauge | 14 AWG |
| Conductor Type | Stranded |
| Conductor Material | Tinned Copper |
| Insulation Material | PVC |
| Color | Brown |
| Length | 100 Foot Spool |
Frequently asked questions
What is Sea-Dog 14-gauge primary wire used for?
It's general-purpose hookup wire for wiring accessories, lighting circuits, pumps, and other lower-load runs on your boat. Fourteen gauge is one of the most common sizes for that kind of work.
Why does the tinned copper conductor matter?
Bare copper corrodes quickly in salt air and damp bilges. The tin coating keeps the strands from corroding, so your connections stay low-resistance and your crimps hold up over the years.
Is the wire stranded or solid?
Stranded. That's what you want on a boat. Stranded wire flexes with hull vibration and engine shake, while solid wire tends to work-harden and crack over time.
How much wire is on the spool?
This is a 100-foot spool of brown 14 AWG, so you've got plenty for a full rigging job or several smaller circuits.
What does the brown color mean?
The color is there for circuit identification. Running different colors for different circuits makes tracing a fault behind the dash much faster later on. Match the color to your own wiring diagram.
Can I run this wire down in the bilge?
The PVC jacket handles abrasion and the occasional fuel or oil splash you'll see down low. As with any wiring, support it properly and keep your terminations up out of standing water.
