Sea-Dog 14 AWG Black Primary Wire, 250 ft Spool
Sea-Dog 14 AWG Black Primary Wire, 250 ft Spool — Product description
This is Sea-Dog 14 AWG black primary wire on a 250 foot spool. It's a single conductor, so you cut what you need and wire in lights, pumps, and accessories without buying short lengths over and over. Black is the usual choice for the negative side of a circuit.
If you rewire boats or keep a shop stocked, a 250 foot spool is the one you'll actually use up. This Sea-Dog 14 AWG black primary wire gives you enough length for a full helm rewire, a string of cockpit lights, or a few bilge pump runs, and you only cut what the job needs.
It's single conductor primary wire, which means one insulated strand set per run. Pair it with a red spool for the positive side and you've got a clean, easy to trace two-wire circuit. Black is the long-standing color for the negative or ground return, so anyone who opens the panel after you will know what they're looking at.
14 AWG sits in the middle of the range for small DC loads. It's a common pick for navigation lights, courtesy lights, small pumps, and accessory feeds. But gauge is only half the picture. Wire size depends on your amp draw and the total length of the run, out and back, so check your load against a wire sizing chart before you cut. A long run to the bow can need a heavier wire than the same load at the helm.
A few install habits pay off on any boat. Use proper crimp connectors sized for the wire, seal your connections against moisture, and support the wire so it doesn't chafe against edges or vibrate loose. Label both ends while you're at it. Future you will be grateful. And if you're pulling wire through a conduit or behind a headliner, leave a little slack at each end so you can re-terminate later without splicing.
We don't list a voltage or temperature rating for this spool, so confirm the specifics with the manufacturer if your install calls for a particular standard. Questions about sizing a circuit? Ask the crew and we'll help you sort it out.
Key Features
- 14 AWG single conductor, a common size for small DC lighting and accessory circuits
- Black insulation, the usual color for negative and ground runs
- 250 foot spool, enough for whole-boat rewires and repeat jobs
- Cut to length, so you only use what each run needs
- Sea-Dog part number 8014014 for easy reordering
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog 14 AWG Black Primary Wire - 250' |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 8014014 |
| UPC | 035514801379 |
| Wire Gauge | 14 AWG |
| Color | Black |
| Spool Length | 250 ft |
| Wire Type | Primary Wire |
| Category | Electrical | Wire |
Frequently asked questions
How long is this spool of wire?
The spool is 250 feet, as shown in the product title.
What gauge is this wire?
It's 14 AWG. That's a common size for small DC loads like lights and accessory feeds, but always check your amp draw and run length first.
What color is it and what's it used for?
It's black. Black is the usual color for negative or ground runs, so it pairs naturally with a red spool for the positive side.
Is this single conductor or multi-conductor wire?
It's primary wire, a single conductor per run. If you need two or three conductors in one jacket, look at the duplex or triplex wire in the Sea-Dog line.
How do I know if 14 AWG is enough for my circuit?
Add up the amp draw of everything on the circuit, measure the total run length out and back, and check both against a wire sizing chart. Longer runs often need a heavier gauge.
What's the manufacturer part number?
The Sea-Dog part number is 8014014, and the UPC is 035514801379.