Sea-Dog

Sea-Dog 12 AWG Yellow Primary Wire, 100 ft Spool

SKU: 112490 · UPC: 035514801348 · MPN: 8012032
★★★★★ 4.7 · 0 reviews
Authorized dealer
$29.99
or 4 payments of $7.49 with Affirm · See disclosures
Low stock — 3 left — Ships today Pickup Monday · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$29.99
02 · Overview

Sea-Dog 12 AWG Yellow Primary Wire, 100 ft Spool — Product description

Sea-Dog 12 AWG yellow primary wire comes on a 100 foot spool, so you can cut what you need for pumps, lights, and other DC circuits on your boat. It's single-conductor wire in a color that makes circuits easy to trace later.

This is a 100 foot spool of Sea-Dog 12 AWG yellow primary wire. It's single-conductor DC wire, sold by the spool so you can cut exactly what you need and not a foot more. If you've ever run short halfway through a rewire, you know why a full 100 feet is handy.

12 AWG is a solid middle-of-the-road gauge for boat projects. It's heavier than the thin stuff you'd use for indicator lights and small signal runs, so it suits the circuits that carry a real load. Think bilge pumps, livewell pumps, nav lights with a long run back to the panel, or a fan that sits far from the battery switch. Wire size always depends on the amp draw and the length of the run, so check your load and your voltage drop before you pick a gauge.

Yellow gives you a clear way to tell one circuit from another. Plenty of boaters pick a color per system, so when they open a junction box two years later they aren't guessing. Label both ends anyway. It takes a minute and saves an afternoon.

Our listing doesn't carry a UL or ABYC rating for this spool, and we won't claim one. If your project or your insurance surveyor calls for a specific wire standard, confirm the requirement before you buy. We're glad to help you sort it out.

Pair it with properly sized terminals, adhesive-lined heat shrink, and a good crimper for connections that hold up on the water. A bare twist and some tape won't cut it out there.

A few habits make any wire run last. Support it every 18 inches or so with clamps so it can't chafe on a bulkhead edge. Run it through grommets where it passes through a panel. Keep it up out of the bilge water when you can, and leave a little slack at each connection so vibration doesn't tug on the crimp. Good routing matters as much as the wire itself.

Sea-Dog part number 8012032. One spool, 100 feet, 12 AWG, yellow.

Key Features

  • 12 AWG gauge for moderate-load DC circuits, sized by amp draw and run length
  • 100 foot spool so you can cut exactly the length you need
  • Yellow insulation for easy circuit identification at the panel and junction boxes
  • Single-conductor primary wire, one conductor per run
  • Sea-Dog part number 8012032

Why Buy from NVN Marine

  • Authorized Sea-Dog reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Monday) $29.99
03 · The numbers

Technical specifications

Title Sea-Dog 12 AWG Yellow Primary Wire - 100'
Brand Sea-Dog
Manufacturer Part Number 8012032
UPC 035514801348
Wire Gauge 12 AWG
Color Yellow
Length 100 ft
Wire Type Primary Wire
Category Electrical | Wire
04 · Before you buy

Frequently asked questions

What gauge is this wire?

It's 12 AWG, as listed in the product title.

How much wire comes on the spool?

The spool is 100 feet.

What color is it?

Yellow.

Is this wire UL or ABYC rated?

We don't list a UL or ABYC rating for this item, so we don't claim one. If your install requires a specific standard, check that requirement before ordering.

Is this single-conductor wire?

Yes. It's sold as primary wire, which means one conductor per run. Duplex and triplex wire are separate products.

How do I know if 12 AWG is right for my circuit?

It depends on the amp draw and how long the run is. Work out your load and acceptable voltage drop first, then pick the gauge. When in doubt, go a size up.

05 · Customer voices

Customer reviews