Sea-Dog 12 AWG Red Primary Wire, 250 ft Spool
Sea-Dog 12 AWG Red Primary Wire, 250 ft Spool — Product description
This Sea-Dog 12 AWG red primary wire comes on a 250 foot spool, so you've got enough to rewire a whole boat without splicing short ends together. It's single-conductor wire in red, the color most boaters use for positive runs.
If you've ever started a wiring job and run out of wire halfway through, you'll appreciate a 250 foot spool. This is Sea-Dog 12 AWG primary wire in red, sold as a single conductor. That makes it a good fit for the jobs where you pull one wire at a time, like a positive feed to a bilge pump, a new accessory circuit, or a full panel rewire.
12 AWG sits in a handy middle spot. It's heavier than the 14 and 16 gauge wire you'd use for small lights and gauges, and it's easier to route than the big battery cable. Plenty of boaters use this size for pumps, fans, and other mid-draw gear. Whatever you run, size the wire to the load and the length of the run. A long run to the bow needs more margin than a short hop behind the helm.
Red is the standard color for positive, and keeping to it makes the next person's job easier, which is often you a few seasons from now. Pair it with a black spool for the return side, and label both ends of each run before you bury them in a liner or behind a console.
A few honest notes. The information we have for this spool covers the gauge, color, and length. It doesn't list conductor material, insulation rating, or any compliance certification, so check the packaging if your install calls for a specific standard. And since it's sold as a spool, you'll want to cut it clean and finish the ends with proper terminals and a good crimp tool.
This is the 250 foot size, which suits shops, builders, and anyone planning several circuits. If you only need a short run, a smaller spool will cost you less up front. If you're wiring more than one thing, the big spool usually works out better.
Key Features
- 12 AWG single-conductor primary wire, a solid mid-size gauge for pumps, fans, and accessory circuits
- Red insulation, the standard color for positive runs
- 250 foot spool, enough for several circuits or a full rewire without splicing short pieces
- Sold by the spool, so you cut exactly the lengths you need
- Sea-Dog part number 8012024 for easy reordering
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog 12 AWG Red Primary Wire - 250' |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 8012024 |
| UPC | 035514801294 |
| Wire Gauge | 12 AWG |
| Color | Red |
| Length | 250 ft |
| Wire Type | Primary Wire |
| Category | Electrical | Wire |
Frequently asked questions
How long is this spool of wire?
It's a 250 foot spool of 12 AWG red primary wire.
What color is the wire?
Red. Most boaters use red for positive runs and black for the return side.
Is this single-conductor or multi-conductor wire?
It's primary wire, which means a single conductor. You pull one wire per run.
What's the Sea-Dog part number?
The manufacturer part number is 8012024 and the UPC is 035514801294.
Does this wire carry a UL or ABYC rating?
We don't have a compliance rating listed for this spool, so we won't claim one. If your install requires a specific standard, check the spool packaging or ask our crew.
Can I use 12 AWG wire for any circuit on my boat?
Not every circuit. Wire size depends on the load and the length of the run. Check the device's current draw and the run distance before you pick a gauge.