Sea-Dog 12 AWG Grey Primary Wire, 100 Ft Spool
Sea-Dog 12 AWG Grey Primary Wire, 100 Ft Spool — Product description
This is a 100 foot spool of Sea-Dog 12 AWG grey primary wire. It's single conductor wire for running your own circuits, and 12 AWG gives you a heavier gauge for longer runs and bigger loads. Cut what you need and keep the rest for the next job.
This is a 100 foot spool of Sea-Dog 12 AWG grey primary wire, part number 8012112. It's single conductor wire, so you get one color and one run per spool. Pick the color that fits your wiring plan, cut what you need, and wire it in.
Primary wire is the workhorse of boat wiring. Think of the runs behind the dash, the feed out to a bilge pump or a light, or the new circuit you're adding for a fishfinder or stereo amp. A full 100 feet on the spool means you can pull a long run from the helm to the stern in one piece, with no mid-run splice waiting to corrode.
Why grey? Color coding keeps a boat serviceable. When every circuit has a consistent color, the next person to open the panel can trace what's what. That person might be you three seasons from now. A spool in a single color is handy when you want to dedicate one color to one job.
12 AWG sits in the heavier range of common boat wire sizes. Lower AWG numbers mean thicker conductors, so 12 AWG carries more current and loses less voltage over distance than a thinner 14 or 16 AWG. How much current is safe depends on run length, the voltage drop you can live with, and the fuse or breaker protecting the circuit. Size it to your load instead of guessing.
Good terminations matter more than most people think. Use a sharp cutter, strip clean, crimp with a terminal sized for 12 AWG, and seal the ends so moisture can't wick in. Connectors, heat shrink, and fuse holders are sold separately.
One honest note. Our listing gives us the gauge, color, length, and part number. It doesn't spell out the conductor type, the insulation rating, or whether this spool carries a specific UL or ABYC listing. If your project or survey needs that paperwork, confirm it against the manufacturer's data for part 8012112 before you buy.
Key Features
- 12 AWG gauge, a heavier conductor size for longer runs and higher loads
- 100 foot spool, enough for a helm to stern run in one piece
- Grey insulation color for clear circuit identification
- Single conductor primary wire, cut to the length you need
- Sea-Dog part number 8012112 for easy reordering
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog 12 AWG Grey Primary Wire - 100' |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 8012112 |
| UPC | 035514803670 |
| Wire Gauge | 12 AWG |
| Color | Grey |
| Length | 100 ft |
| Wire Type | Primary Wire |
| Category | Electrical | Wire |
Frequently asked questions
What gauge is this wire?
It's 12 AWG. Lower AWG numbers are thicker, so 12 AWG is heavier than 14 or 16 AWG wire.
How much wire is on the spool?
The spool holds 100 feet.
What color is it?
Grey, as shown in the product title.
Is this single conductor or multi-conductor wire?
It's primary wire, which means a single conductor in one color. If you need a paired or bundled cable, look for a duplex or triplex wire in the Sea-Dog line.
Is this wire UL or ABYC listed?
Our listing doesn't state a UL or ABYC listing for this spool. If you need that documentation, check the manufacturer's data for part number 8012112 before ordering.
What are the part number and UPC?
The Sea-Dog part number is 8012112 and the UPC is 035514803670.
Does the spool come with terminals or connectors?
No. The listing covers the wire only, so terminals, heat shrink, and fuse holders are sold separately.