RUPES

RUPES PROCUT 6" P1200 Film Abrasive Discs, Box of 50

SKU: 115381 · UPC: 8050246741375 · MPN: 9.45FD1200
★★★★★ 4.7 · 0 reviews
Authorized dealer
$34.99
or 4 payments of $8.74 with Affirm · See disclosures
In stock — Ships today Pickup Monday · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$34.99
02 · Overview

RUPES PROCUT 6" P1200 Film Abrasive Discs, Box of 50 — Product description

RUPES PROCUT Film Abrasive Discs give you a fine P1200 finishing step in a 150mm (6") size. The 15-hole pattern is made for dust extraction, and the box of 50 keeps fresh discs on hand for the whole job.

If you've ever finished a gelcoat or clear coat repair and been annoyed by the haze left behind, you already know why fine grits matter. These RUPES PROCUT Film Abrasive Discs are P1200 grit, which puts them squarely in the fine finishing range. They're the step you reach for after the coarser work is done and before you move on to compounding and polishing.

Each disc is 150mm (6") across, so it fits the standard 6-inch random orbital setups most boat shops and detailers already run. The 15-hole pattern is built for dust extraction, which is a big deal when you're sanding fiberglass. Fine dust gets everywhere on a boat, and pulling it through the pad keeps your work surface a lot cleaner. Just make sure your backing pad has a matching 15-hole layout, because the holes only help if they line up.

The box holds 50 discs. That's enough to work through a good-sized hull side or a few smaller jobs without stopping to reorder. And because a fine disc loads up and loses its bite faster than most people expect, having a full box on the shelf means you can swap to a fresh one instead of pushing a tired disc and leaving swirls behind.

Where does P1200 fit in a real job? Think of wet or dry refining of a repaired spot, taking down orange peel in fresh clear coat, or removing the scratch pattern left by a P800 or P1000 pass. It's not the disc for heavy material removal. If you're still leveling a rough repair, start coarser and work your way up through the grits, then bring this one in to close out the sanding stage.

A few practical tips from the dock. Keep the pad flat and let the disc do the cutting instead of leaning on it. Wipe the surface between grit changes so a stray coarse particle doesn't gouge your finish. And check your work under good light at an angle before you move on, since fine scratches hide until the sun hits them just right.

We stock RUPES abrasives for boaters and pros who want a consistent, fine finishing step. If you're not sure whether P1200 is the right grit for your surface, ask our crew and we'll help you sort it out before you sand.

Key Features

  • P1200 grit for fine finishing, so you can refine scratches before compounding.
  • 150mm (6") diameter fits standard 6-inch sanding setups.
  • 15-hole pattern for dust extraction, which keeps fiberglass dust off your work.
  • Box of 50 discs, so you've got fresh ones ready when a disc loads up.
  • PROCUT film abrasive from RUPES for a consistent finishing step.

Why Buy from NVN Marine

  • Authorized RUPES reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Monday) $34.99
03 · The numbers

Technical specifications

Title RUPES PROCUT Film Abrasive Discs 150mm (6") - 15 Holes - P1200 Grit *Box of 50pcs
Brand RUPES
Manufacturer Part Number 9.45FD1200
UPC 8050246741375
Product Line PROCUT
Abrasive Type Film
Grit P1200
Disc Diameter 150mm (6")
Hole Pattern 15 holes
Quantity Box of 50 pcs
04 · Before you buy

Frequently asked questions

What grit are these RUPES PROCUT discs?

They're P1200 grit, a fine finishing grade used to refine surfaces after coarser sanding.

What size are these discs?

They're 150mm (6") in diameter.

How many discs come in a box?

Each box contains 50 discs.

How many holes do the discs have?

They have a 15-hole pattern designed for dust extraction. Your backing pad needs a matching hole layout for the holes to line up.

Are these good for heavy sanding or material removal?

No. P1200 is a fine grit meant for finishing and scratch refinement. Start with a coarser grit for leveling rough repairs, then move up to this one.

What is the manufacturer part number?

The RUPES part number is 9.45FD1200.

05 · Customer voices

Customer reviews