RUPES PROCUT 150mm P80 Film Discs, 50 Pack
RUPES PROCUT 150mm P80 Film Discs, 50 Pack — Product description
The RUPES PROCUT Film Abrasive Disc is a 150mm (6 inch), 15-hole, P80 grit disc that ships in a box of 50. P80 is a coarse grit, so it's a good fit for the heavy first pass when you're prepping a hull, deck, or repair area.
These RUPES PROCUT Film Abrasive Discs are 150mm (6 inch) sanding discs with a 15-hole pattern, sold as a box of 50. The grit is P80, which sits at the coarse end of the sanding range. That makes it a working disc for taking material down, not for final finish.
On a boat, coarse sanding usually means a handful of jobs. Knocking down old paint, leveling a repair, or taking a surface back before you move on to finer grits. P80 is where you start those jobs, not where you finish them. Plan on stepping up through finer discs afterward so the scratches get cleaned out before primer or paint goes on.
The listing calls this a film abrasive disc. We don't have a manufacturer spec sheet for this item, so we're not going to make claims about backing thickness or disc life. What we can tell you is what the box listing says: film abrasive, 150mm, 15 holes, P80 grit, 50 discs per box.
Grit numbers on the P scale climb as the abrasive gets finer. P80 cuts fast and leaves a visible scratch pattern, so treat it as a first step. If you're prepping gelcoat, fairing compound, or an old topside finish, keep finer grits on hand for the passes that follow.
The 15-hole pattern is there for dust extraction, so check that it lines up with the backing pad on your sander before you order. Fit depends on your pad, so match the 150mm size and the hole layout to your equipment first. Fifty discs is a solid supply for a hull or deck project, and a full box means you won't run out halfway through a job.
Not sure this is the right disc for your sander or your project? Ask the crew and we'll help you sort it out before you buy.
Key Features
- 150mm (6 inch) disc diameter, a common size for 6 inch random orbital sanders
- 15-hole pattern for dust extraction, so confirm it matches your backing pad
- P80 grit for coarse stock removal and first-pass surface prep
- Film abrasive construction from the PROCUT line
- Box of 50 discs, enough for a full project without reordering
Why Buy from NVN Marine
- Authorized RUPES reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | RUPES PROCUT Film Abrasive Discs 150mm (6") - 15 Holes - P80 Grit *Box of 50pcs |
|---|---|
| Brand | RUPES |
| Manufacturer Part Number | 9.45FD080 |
| UPC | 8050246741221 |
| Product Line | PROCUT |
| Abrasive Type | Film |
| Disc Diameter | 150mm (6") |
| Hole Pattern | 15 holes |
| Grit | P80 |
| Quantity | Box of 50 pcs |
| Category | Boat Outfitting | Cleaning |
Frequently asked questions
What size are these discs?
They're 150mm (6 inch) discs.
How many discs come in the box?
Each box holds 50 discs.
What grit is this disc?
It's P80, a coarse grit. It's meant for fast material removal and first-pass prep, so plan on finer grits afterward.
How many holes does the disc have?
The disc has a 15-hole pattern. Check that it matches the hole layout on your sanding pad before you order.
What type of abrasive is this?
It's a film abrasive disc from the RUPES PROCUT line.
What's the manufacturer part number?
The RUPES part number is 9.45FD080.