RUPES PROCUT Film Abrasive Discs 150mm 15 Hole P40, Box of 50
RUPES PROCUT Film Abrasive Discs 150mm 15 Hole P40, Box of 50 — Product description
RUPES PROCUT film abrasive discs in a box of 50. Each one is 150mm (6"), P40 grit, with a 15-hole pattern. A coarse disc for fast stock removal when the prep work is heavy.
These RUPES PROCUT Film Abrasive Discs are 150mm (6") sanding discs with a 15-hole pattern, cut to P40 grit and sold as a box of 50. If you've got heavy stock removal ahead, this is the coarse end of your sanding sequence.
P40 is a coarse grit. It's the one you grab when you need to cut fast, knock down high spots, or strip a finish that's seen too many seasons. It isn't the grit you finish with. Plan on stepping up to finer discs afterward, because P40 leaves a rough scratch pattern that needs refining before any primer, paint, or polish goes on. Skip that step and the scratches will show through.
The 15-hole pattern is there for dust extraction. The holes in the disc line up with a matching interface pad, so dust gets pulled away through the pad instead of sitting between the disc and your work. Before you order, check that your pad has a 15-hole layout and a 150mm (6") size. If it doesn't match, the extraction won't line up the way it should, and you'll be fighting dust all afternoon.
These are film abrasive discs from the PROCUT line. RUPES has been building sanding and polishing tools since 1947 in Milan, Italy, so the name carries some history in the shop. At 50 discs per box, you're covered for a full refit job or a busy week of prep work without reordering after every panel. That matters when a project drags on and you don't want to stop mid-session to hunt for another pack.
We don't have a detailed manufacturer spec sheet for this listing, so we're sticking to what the box label tells us: size, hole count, grit, and quantity. If you need backing type or attachment details before you buy, reach out to the crew and we'll help you confirm it.
Key Features
- 150mm (6") diameter for 6-inch backing pads
- 15-hole pattern for dust extraction through a matching pad
- P40 coarse grit for fast stock removal
- Film abrasive discs from the RUPES PROCUT line
- 50 discs per box so you can stay on the job
- Manufacturer part number 9.45FD040
Why Buy from NVN Marine
- Authorized RUPES reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | RUPES PROCUT Film Abrasive Discs 150mm (6") - 15 Holes - P40 Grit *Box of 50pcs |
|---|---|
| Brand | RUPES |
| Manufacturer Part Number | 9.45FD040 |
| UPC | 8050246741207 |
| Product Line | PROCUT |
| Abrasive Type | Film |
| Disc Diameter | 150mm (6") |
| Hole Pattern | 15 Holes |
| Grit | P40 |
| Quantity per Box | 50 pcs |
Frequently asked questions
How many discs come in a box?
Each box holds 50 discs.
What grit are these discs?
They're P40 grit, which is coarse. Use them for fast cutting and stock removal, then step up to finer grits for finishing.
What size are the RUPES PROCUT discs?
They're 150mm (6") in diameter.
How many holes do these discs have?
They have a 15-hole pattern. Your pad should have a matching 15-hole layout so the dust extraction lines up.
Can I use P40 discs for a final finish?
No. P40 is a coarse grit and leaves a rough scratch pattern. Plan on following up with finer discs before primer, paint, or polish.
What is the manufacturer part number?
The manufacturer part number is 9.45FD040.