{"product_id":"rigid-sr-m-pro-flood-led-flush-mount-922113","title":"Rigid Industries SR-M PRO Flood LED, Flush Mount (922113)","description":"\u003cp class=\"nvn-hero\"\u003eThe Rigid Industries SR-M PRO is a compact 2 by 5 inch flush-mount LED flood light that puts out 1584 raw lumens while pulling just 1.07 amps. It ships with a powder-coated black housing, an unbreakable Lexan lens, and a complete harness with switch and Deutsch connector, so you can wire it in and go.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Rigid Industries SR-M PRO in the flush-mount, flood configuration is one of those lights you install once and stop thinking about. It's a small rectangle, 2 inches by 5 inches on the face, but it throws a wide 1584 raw lumen flood that fills in the close and mid range beautifully. Think cockpit wash, deck lighting, a work light over a swim platform, or a spot on a rack or roll bar where you need to light up the ground around you without a narrow pencil beam blinding everyone.\u003c\/p\u003e\n\u003cp\u003eWhat makes the flood pattern the right pick here is spread. A flood doesn't reach way out the way a spot does, but it lays down an even, usable wash of light right where you're standing and working. That's exactly what you want for close-in tasks. Tying up at the dock at night, rigging lines, cleaning fish, loading gear, working on the trailer in a dark lot. If you need to punch light a long way downrange, that's a spot's job, not this one. Know which one you're buying and you'll be happy.\u003c\/p\u003e\n\u003cp\u003eThe build is what you'd expect from this series. The housing is powder-coated black aluminum with cooling fins cast into the back, and those fins matter more than they look. LEDs hate heat, and a light that can't shed it dims and dies early. The fins pull heat off the emitters so the light holds its output and its lifespan. The lens is unbreakable clear Lexan, so a stray fender, a dropped tool, or a rock kicked up on the trail won't crack it. It's a tough little unit.\u003c\/p\u003e\n\u003cp\u003ePower draw is the quiet headline. At 1.07 amps it sips current, so you can run one or a bank of them without redoing your whole electrical system. That low draw is a real advantage on anything with a modest battery. You get a lot of usable light for very little load, which means longer run time and less strain on your charging setup. Fifteen watts, 1584 raw lumens, and just over an amp. That's an efficient package.\u003c\/p\u003e\n\u003cp\u003eWiring is refreshingly straightforward because Rigid includes the harness with a switch and a Deutsch connector in the box. The Deutsch connector is the sealed, locking style used across serious 12-volt gear, so once it's clicked together it stays together and it keeps water out of the contacts. You get the mounting hardware too. So this isn't a bare light head that leaves you sourcing pigtails and a switch, it's a complete kit. Mount it, run the harness to a switch and a fused power source, and you're done.\u003c\/p\u003e\n\u003cp\u003eFlush mount means the light sits into a cutout so the face is close to flush with the surface, giving you a clean, low-profile look with nothing sticking out to snag a line or catch a knee. Take your time with the cutout. A precise opening is what keeps water where it belongs, especially on a transom or any vertical surface that sees spray. Measure twice, cut once, and seal it properly. If you rush the hole, that's where trouble starts.\u003c\/p\u003e\n\u003cp\u003eA few honest notes on living with it. This light is officially labeled for off-road use only, so keep that in mind for how and where you register it as legal on-road lighting. Plenty of folks run these on boats, side-by-sides, trailers, and rigs for work and utility light, and they hold up. If you're mounting to aluminum, put a dab of anti-seize on the stainless hardware so the threads don't gall. And if the light lives outside in a salt environment, give the fins a quick freshwater rinse now and then. Salt crystals love to collect back there, and a rinse keeps them cooling like they should. None of this is hard, it's just the kind of thing that keeps gear working for years instead of seasons.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone who wants a durable, low-draw flood in a small footprint. Boaters lighting a cockpit or transom, off-roaders filling in the area lighting around a rig, trailer and utility folks who want real light without a big amp bill. It's a single light with everything you need to install it, built to take a beating, and easy on your battery. Simple, tough, and it just works.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e1584 raw lumens in a flood pattern for a wide, even wash of close and mid-range light\u003c\/li\u003e\n  \u003cli\u003eDraws just 1.07 amps, so you can run one or a bank without overloading your electrical\u003c\/li\u003e\n  \u003cli\u003e15 watt LED output in a compact 2 by 5 inch rectangular face\u003c\/li\u003e\n  \u003cli\u003eUnbreakable clear Lexan lens shrugs off impacts, tools, and debris\u003c\/li\u003e\n  \u003cli\u003ePowder-coated black aluminum housing with rear cooling fins to shed heat and protect LED life\u003c\/li\u003e\n  \u003cli\u003eFlush-mount design sits low and clean with nothing to snag a line or a knee\u003c\/li\u003e\n  \u003cli\u003eSealed, locking Deutsch connector keeps water out of the contacts\u003c\/li\u003e\n  \u003cli\u003eShips complete with mounting hardware and a harness with switch, ready to wire in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Rigid Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a flood or a spot beam?\u003c\/summary\u003e\n    \u003cp\u003eIt's a flood. The flood pattern spreads a wide, even wash of light for close and mid-range work like cockpit and deck lighting, not a narrow long-distance beam. If you need to throw light far downrange, you want a spot instead.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's included in the box?\u003c\/summary\u003e\n    \u003cp\u003eIt's a complete single-light kit. You get the light, the mounting hardware, and a wiring harness with a switch and a Deutsch connector. Mount it, run the harness to a fused power source, and it's ready to go.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much power does it draw?\u003c\/summary\u003e\n    \u003cp\u003eJust 1.07 amps. That low draw means you can run one or several without straining a modest battery or redoing your charging setup. It's a very efficient 15 watt LED.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is it?\u003c\/summary\u003e\n    \u003cp\u003e1584 raw lumens. In a flood pattern that translates to a strong, even fill of light across the area right in front of you, which is what you want for close-in tasks.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the lens made of?\u003c\/summary\u003e\n    \u003cp\u003eUnbreakable clear Lexan. It resists impacts from dropped tools, fenders, or kicked-up debris, so it won't crack the way a glass lens might.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat connector does it use?\u003c\/summary\u003e\n    \u003cp\u003eA Deutsch connector, the sealed and locking type used across quality 12-volt gear. It clicks together, stays together, and keeps water out of the electrical contacts.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use this on a boat?\u003c\/summary\u003e\n    \u003cp\u003eIt's officially labeled for off-road use only, so factor that into where you rely on it as legal on-road lighting. That said, plenty of boaters and off-roaders run these for cockpit, deck, trailer, and utility lighting and they hold up well in those roles.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I keep it working in a salt environment?\u003c\/summary\u003e\n    \u003cp\u003eGive the rear cooling fins a quick freshwater rinse now and then, since salt crystals collect back there and can hurt cooling. If you're mounting to aluminum, add a little anti-seize on the stainless hardware so the threads don't gall.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount?\u003c\/summary\u003e\n    \u003cp\u003eIt's a flush mount, so it sits into a cutout with the face close to flush for a clean, low-profile look. Take your time on the cutout and seal it properly, especially on a transom or any surface that sees spray, so water stays out.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRigid Industries SR-M PRO Flood LED Flush Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRigid Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e922113\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774027819\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eSR-M PRO\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBulb Type\u003c\/th\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eFlood\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eFlush Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eRectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFace Dimensions\u003c\/th\u003e\n\u003ctd\u003e2 in x 5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e15 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmp Draw\u003c\/th\u003e\n\u003ctd\u003e1.07 AMP\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRaw Lumens\u003c\/th\u003e\n\u003ctd\u003e1584\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Color\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens Material\u003c\/th\u003e\n\u003ctd\u003eUnbreakable Clear Lexan\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003ePowder Coated Black with Rear Cooling Fins\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eDeutsch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eMounting Hardware, Harness with Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUsage\u003c\/th\u003e\n\u003ctd\u003eOff-Road Use Only\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a flood or a spot beam?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a flood. The flood pattern spreads a wide, even wash of light for close and mid-range work like cockpit and deck lighting, not a narrow long-distance beam. If you need to throw light far downrange, you want a spot instead.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's included in the box?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a complete single-light kit. You get the light, the mounting hardware, and a wiring harness with a switch and a Deutsch connector. Mount it, run the harness to a fused power source, and it's ready to go.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much power does it draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Just 1.07 amps. That low draw means you can run one or several without straining a modest battery or redoing your charging setup. It's a very efficient 15 watt LED.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"1584 raw lumens. In a flood pattern that translates to a strong, even fill of light across the area right in front of you, which is what you want for close-in tasks.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the lens made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Unbreakable clear Lexan. It resists impacts from dropped tools, fenders, or kicked-up debris, so it won't crack the way a glass lens might.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What connector does it use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A Deutsch connector, the sealed and locking type used across quality 12-volt gear. It clicks together, stays together, and keeps water out of the electrical contacts.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this on a boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's officially labeled for off-road use only, so factor that into where you rely on it as legal on-road lighting. That said, plenty of boaters and off-roaders run these for cockpit, deck, trailer, and utility lighting and they hold up well in those roles.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I keep it working in a salt environment?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Give the rear cooling fins a quick freshwater rinse now and then, since salt crystals collect back there and can hurt cooling. If you're mounting to aluminum, add a little anti-seize on the stainless hardware so the threads don't gall.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a flush mount, so it sits into a cutout with the face close to flush for a clean, low-profile look. Take your time on the cutout and seal it properly, especially on a transom or any surface that sees spray, so water stays out.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":45048105467997,"sku":"2008062","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_1af5f496-d42e-49fa-a6c3-925b300eecb6.jpg?v=1789356603","url":"https:\/\/nvnmarine.com\/products\/rigid-sr-m-pro-flood-led-flush-mount-922113","provider":"NVN Marine","version":"1.0","type":"link"}