{"product_id":"rigid-revolve-410613-10-inch-marine-led-light-bar","title":"RIGID Revolve 410613 10-Inch LED Light Bar, White Backlight","description":"\u003cp class=\"nvn-hero\"\u003eThe RIGID Industries Revolve 410613 is a 10-inch LED light bar built for boats that run before dawn and dock after dark. You get a combo spot and flood beam pushing 5082 raw lumens, a white backlight ring for accent glow, and a draw of just 2.9 amps at 12 volts. That's a lot of usable light for very little current.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eRIGID Industries built the Revolve series for people who need serious light in a compact package, and the 410613 is the 10-inch version with a white backlight. It's an LED light bar that runs a combo spot and flood beam, so you get a tight hotspot that reaches downrange plus a wide wash that lights up the water right in front of you. On a boat, that combination matters. You want to see the channel marker a hundred yards out and the crab pot floating ten feet off the bow at the same time.\u003c\/p\u003e\n\u003cp\u003eThe numbers back it up. This bar puts out 5082 raw lumens from a 47-watt LED array, and it does it while pulling only 2.9 amps at 12 volts. That's the part boaters tend to appreciate most. It's a lot of light for very little current, so you can wire it to a single switched circuit without worrying about dragging your house bank down on a long night run. And because it's an LED array and not an old halogen setup, you're not replacing bulbs every season or babysitting a hot fixture near your gelcoat.\u003c\/p\u003e\n\u003cp\u003eIt accepts anywhere from 9 to 36 volts, which means it drops straight onto a 12-volt system or a 24-volt system with no converter and no fuss. If you've ever tried to add lighting to a bigger boat with a 24-volt house setup, you know how handy that is. Wire it in, throw it on a breaker sized for the load, and you're done.\u003c\/p\u003e\n\u003cp\u003eThe white backlight is what sets the Revolve apart from a plain bar. It's a soft accent ring that glows separately from the main beam, so you can add a bit of light at the helm or along a tower leg without lighting up the whole cockpit. Some folks run it as courtesy lighting at the dock and save the full beam for when they actually need to see. It's a small touch, but it's the kind of detail that makes a boat feel finished.\u003c\/p\u003e\n\u003cp\u003eThink about how you actually run at night and this bar starts to make sense. Idling out of a dark marina, you want the flood spreading wide so you can pick up pilings and lines without over-driving the beam. Once you're on plane and headed for the inlet, that same combo puts a spot down the channel so you catch markers and traffic early. Anchored up for the night, drop it back to the backlight and you've got a soft glow to move around the cockpit without killing your eyes. One light bar, three different jobs, all from a fixture that pulls under three amps.\u003c\/p\u003e\n\u003cp\u003eBuild quality is where RIGID earns its name. The housing is black aluminum, which sheds heat well and holds up to salt spray and UV. The lens is clear, so you keep the full lumen output and the widest beam spread instead of trading brightness for a colored cover. Like any marine light, it'll last longer if you give it a fresh-water rinse now and then and keep an eye on the seals.\u003c\/p\u003e\n\u003cp\u003eMounting is straightforward. The bar stands 2.6 inches tall, so it sits low and clean whether you're putting it on a bow rail, a T-top, a hardtop, or a wakeboard tower. The bolt-on brackets and hardware come in the box, so you're not hunting for a separate mount kit. On fiberglass, do yourself a favor and use backing plates behind the mounting points so the hardware doesn't work loose over a season of pounding. Take a minute to aim it before you torque everything down, a combo beam rewards a little care in setup.\u003c\/p\u003e\n\u003cp\u003eSo who's this for? Anyone who runs early or late and wants dependable, low-draw light that installs clean and looks the part. Whether you're heading out before sunrise to beat the crowd or docking after dark, the RIGID Revolve 410613 gives you the reach and the spread to do it with confidence. And it's covered by the full RIGID manufacturer warranty when you buy it from us.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e5082 raw lumens from a 47-watt LED array puts real usable light on the water without cooking your battery\u003c\/li\u003e\n  \u003cli\u003eCombo spot and flood beam throws a tight hotspot downrange while flooding the foreground, so you cover distance and the water right off the bow\u003c\/li\u003e\n  \u003cli\u003eDraws just 2.9 amps at 12 volts, light enough to run off a single switched circuit on most boats\u003c\/li\u003e\n  \u003cli\u003eAccepts 9 to 36 volts, so it drops onto 12-volt and 24-volt systems without a converter\u003c\/li\u003e\n  \u003cli\u003eIntegrated white backlight ring adds accent glow at the helm or along a tower leg\u003c\/li\u003e\n  \u003cli\u003eBlack aluminum housing sheds heat and stands up to salt spray and UV\u003c\/li\u003e\n  \u003cli\u003eClear lens keeps the full lumen output and the widest beam spread\u003c\/li\u003e\n  \u003cli\u003e2.6-inch tall profile mounts low and clean on rails, T-tops, and hardtops\u003c\/li\u003e\n  \u003cli\u003eBolt-on mounting brackets and hardware are in the box, no extra kit to buy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized RIGID Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is the Revolve 410613?\u003c\/summary\u003e\n    \u003cp\u003eIt puts out 5082 raw lumens from a 47-watt LED array, running a combo spot and flood beam. The spot reaches downrange while the flood lights up the water right in front of you.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much current does it draw?\u003c\/summary\u003e\n    \u003cp\u003eJust 2.9 amps at 12 volts. That's low enough to run off a single switched circuit on most boats without stressing your house bank.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it run on a 24-volt system?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's rated for 9 to 36 volts, so it drops onto both 12-volt and 24-volt systems with no converter needed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the beam pattern?\u003c\/summary\u003e\n    \u003cp\u003eIt's a combo spot and flood. The spot throws a tight hotspot for distance and the flood spreads a wide wash up close, so you get reach and coverage from one bar.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the white backlight do?\u003c\/summary\u003e\n    \u003cp\u003eThe Revolve series adds a white backlight ring that glows separately from the main beam. It gives you soft accent light at the helm or along a tower without lighting up the whole cockpit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's included for mounting?\u003c\/summary\u003e\n    \u003cp\u003eBolt-on mounting brackets and hardware come in the box. On fiberglass we recommend adding backing plates so the hardware doesn't work loose over time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it okay in salt water?\u003c\/summary\u003e\n    \u003cp\u003eYes. The black aluminum housing and clear lens are built for the marine environment. Give it a fresh-water rinse now and then and keep an eye on the seals and it'll last.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow big is the light bar?\u003c\/summary\u003e\n    \u003cp\u003eIt's the 10-inch model and stands 2.6 inches tall, so it mounts low and clean on a bow rail, T-top, hardtop, or wakeboard tower.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage and wiring does it need?\u003c\/summary\u003e\n    \u003cp\u003eIt accepts 9 to 36 volts and draws 2.9 amps at 12 volts. Wire it to a switched circuit on a breaker sized for the load and you're set.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRIGID Industries Revolve 410613 10-Inch LED Light Bar, White Backlight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRIGID Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e410613\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774033841\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eRevolve\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Bar Length\u003c\/th\u003e\n\u003ctd\u003e10 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e2.6 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Color\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBacklight\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e47 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmp Draw\u003c\/th\u003e\n\u003ctd\u003e2.9 Amp at 12 Volts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Rating\u003c\/th\u003e\n\u003ctd\u003e9 to 36 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eSpot and Flood\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRaw Lumens\u003c\/th\u003e\n\u003ctd\u003e5082\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eBlack Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Style\u003c\/th\u003e\n\u003ctd\u003eBolt-On Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Hardware\u003c\/th\u003e\n\u003ctd\u003eMounting Brackets and Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is the Revolve 410613?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It puts out 5082 raw lumens from a 47-watt LED array, running a combo spot and flood beam. The spot reaches downrange while the flood lights up the water right in front of you.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much current does it draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Just 2.9 amps at 12 volts. That's low enough to run off a single switched circuit on most boats without stressing your house bank.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it run on a 24-volt system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's rated for 9 to 36 volts, so it drops onto both 12-volt and 24-volt systems with no converter needed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the beam pattern?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a combo spot and flood. The spot throws a tight hotspot for distance and the flood spreads a wide wash up close, so you get reach and coverage from one bar.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the white backlight do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The Revolve series adds a white backlight ring that glows separately from the main beam. It gives you soft accent light at the helm or along a tower without lighting up the whole cockpit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's included for mounting?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Bolt-on mounting brackets and hardware come in the box. On fiberglass we recommend adding backing plates so the hardware doesn't work loose over time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it okay in salt water?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The black aluminum housing and clear lens are built for the marine environment. Give it a fresh-water rinse now and then and keep an eye on the seals and it'll last.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How big is the light bar?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the 10-inch model and stands 2.6 inches tall, so it mounts low and clean on a bow rail, T-top, hardtop, or wakeboard tower.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage and wiring does it need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It accepts 9 to 36 volts and draws 2.9 amps at 12 volts. Wire it to a switched circuit on a breaker sized for the load and you're set.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":44996213538909,"sku":"2007672","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_64a5814f-4d99-436d-ab50-d087bc334f59.jpg?v=1788621721","url":"https:\/\/nvnmarine.com\/products\/rigid-revolve-410613-10-inch-marine-led-light-bar","provider":"NVN Marine","version":"1.0","type":"link"}