{"product_id":"rigid-revolve-30in-led-light-bar-spot-flood","title":"Rigid Industries REVOLVE 30 Inch LED Light Bar, Spot and Flood Combo","description":"\u003cp class=\"nvn-hero\"\u003eThe Rigid Industries REVOLVE 30 inch is a spot and flood combo LED light bar built for real night running. You get 15,246 raw lumens of close-to-mid range light plus a built-in white backlight that doubles as accent lighting on a T-top or tower. It runs on 9 to 36 volts, so it's at home on both 12V and 24V boats.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eRigid Industries built the REVOLVE line for boaters who want serious output and a clean look when the bar's switched off. This is the 30 inch REVOLVE, a spot and flood combo bar that throws 15,246 raw lumens off a 126 watt array, with a white backlight built right into the housing. On a boat that backlight matters more than you'd think. Run it low at the dock or as accent lighting on a T-top, then hit the main beam when you actually need to see the water.\u003c\/p\u003e\n\u003cp\u003eWhere does a 30 inch bar like this go? T-tops and hardtops are the obvious spots. So are radar arches, wake towers, and the front rail of a center console for close-in docking and picking out crab pots or channel markers on a dark run home. The spot and flood combo is the reason we like this one for boat work. The spot portion reaches out down the channel, and the flood fills in the water right off your bow, so you're not staring into a tunnel of light with black on either side.\u003c\/p\u003e\n\u003cp\u003eThe electrical side is straightforward but worth planning. It draws 9.4 amps at 12 volts and runs happily on anything from 9 to 36 volts, so it's fine on both 12V and 24V boats. Because of that draw, put it on its own circuit with a dedicated fuse and don't skimp on wire gauge over a long run from the console. Voltage drop is the enemy of a bright, consistent beam. The white backlight is a separate feed, and a lot of owners tie it into their nav or accent lighting so it comes on with the running lights.\u003c\/p\u003e\n\u003cp\u003eBuild quality is what you'd expect from Rigid. The housing is black aluminum with a clear lens, built to shrug off weather and spray. One note from the saltwater crowd: use stainless hardware at the mounting feet, and if you're bolting to a T-top or tower, add a set of rubber isolators. That keeps vibration from working the brackets loose over a season of pounding chop. The bar ships with mounting brackets and hardware, so you've got what you need to get it up there, but stainless fasteners are cheap insurance on a boat that lives in salt.\u003c\/p\u003e\n\u003cp\u003eOn switching, run the main beam through a properly sized rocker switch and a relay rated for the load, not a light-duty dash toggle that'll cook under nine-plus amps. If your helm has a spare accessory circuit with real capacity, great. Otherwise add a relay off the battery with an inline fuse close to the source. For aiming, tilt the bolt-on brackets so the hot center of the beam sits just below your sightline at cruising speed. Aimed too high, it lights up haze and kills your night vision. Aimed a touch low, it puts light on the surface where you're actually looking.\u003c\/p\u003e\n\u003cp\u003eThe clear lens keeps the beam crisp instead of scattering it, which is what you want when you're trying to pick out a marker at distance. Combined with the spot and flood optics, you get reach and spread from one bar instead of running two separate lights.\u003c\/p\u003e\n\u003cp\u003eSo who's this for? Offshore crews running back after dark, bay boat owners who launch before sunrise, and anyone with a tower who wants both a working light and a backlit accent piece that looks good tied up at the marina. It's a premium bar at a premium price, and the REVOLVE white backlight is the thing you're paying extra for over a plain light bar. If you only care about raw output, Rigid makes simpler bars in this same length. But if you want that dual-purpose look, this is the one to rig up.\u003c\/p\u003e\n\u003cp\u003eA couple of honest expectations. That 15,246 figure is raw lumens measured at the LED, not what lands on the water a hundred feet out, so treat it as a strong close-to-mid range light rather than a searchlight. And mount it where the beam clears your hardtop and windshield, so you're not lighting your own gelcoat and washing out your night vision. Get the placement right and it earns its keep on every night run.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e30 inch REVOLVE bar puts out 15,246 raw lumens from a 126 watt LED array for strong close-to-mid range light on the water\u003c\/li\u003e\n  \u003cli\u003eSpot and flood combo beam reaches down the channel while filling in the water right off your bow\u003c\/li\u003e\n  \u003cli\u003eBuilt-in white backlight doubles as low-key accent lighting on a T-top or tower when the main beam is off\u003c\/li\u003e\n  \u003cli\u003e9.4 amp draw at 12 volts, wire it on its own fused circuit with adequate gauge to avoid voltage drop\u003c\/li\u003e\n  \u003cli\u003eWide 9 to 36 volt range works on both 12V and 24V boats\u003c\/li\u003e\n  \u003cli\u003eBlack aluminum housing with a clear lens, built to shrug off weather and spray\u003c\/li\u003e\n  \u003cli\u003eSlim 2.6 inch housing height mounts cleanly on hardtops, radar arches, and wake towers\u003c\/li\u003e\n  \u003cli\u003eBolt-on mounting brackets and hardware included, add stainless fasteners for saltwater use\u003c\/li\u003e\n  \u003cli\u003eClear lens keeps the beam crisp for better reach at distance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Rigid Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is the REVOLVE 30 inch bar?\u003c\/summary\u003e\n    \u003cp\u003eIt's rated at 15,246 raw lumens from a 126 watt LED array, with a spot and flood combo beam. That's a strong close-to-mid range light. The spot reaches down the channel and the flood fills in the water right off your bow.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the amp draw and how should I wire it?\u003c\/summary\u003e\n    \u003cp\u003eIt draws 9.4 amps at 12 volts. Put it on its own circuit with a dedicated fuse, use adequate wire gauge for the run from your console, and switch it through a relay rated for the load rather than a light-duty dash toggle. That keeps the beam bright and your wiring cool.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work on a 24 volt boat?\u003c\/summary\u003e\n    \u003cp\u003eYes. It accepts anything from 9 to 36 volts, so it runs on both 12V and 24V systems without a converter.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the white backlight do?\u003c\/summary\u003e\n    \u003cp\u003eThe REVOLVE housing has a built-in white backlight that runs on a separate feed from the main beam. A lot of owners tie it into their nav or accent lighting so it comes on with the running lights. It gives you low-key accent light on a T-top or tower when the main beam is off.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhere should I mount a 30 inch bar on my boat?\u003c\/summary\u003e\n    \u003cp\u003eT-tops, hardtops, radar arches, wake towers, and the front rail of a center console all work. Mount it where the beam clears your hardtop and windshield so you're not lighting your own gelcoat and washing out your night vision.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the spot and flood combo better than all spot or all flood?\u003c\/summary\u003e\n    \u003cp\u003eFor boat work, yes. The spot portion throws light out down the channel while the flood spreads it across the water right in front of you. You get reach and spread from one bar instead of running two separate lights.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with mounting hardware?\u003c\/summary\u003e\n    \u003cp\u003eYes. It ships with bolt-on mounting brackets and hardware. On a saltwater boat we'd swap in stainless fasteners at the mounting feet, since that's where corrosion tends to start.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I keep the brackets from loosening on a T-top?\u003c\/summary\u003e\n    \u003cp\u003eAdd a set of rubber isolators between the bracket and the mount to soak up vibration, use stainless hardware, and re-check the torque after your first couple of trips. That keeps a season of pounding chop from working the fasteners loose.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it sealed for marine use?\u003c\/summary\u003e\n    \u003cp\u003eThe housing is black aluminum with a clear lens, built to shrug off weather and spray. A fresh-water rinse now and then keeps salt off the housing and hardware.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow tall is the housing?\u003c\/summary\u003e\n    \u003cp\u003eThe housing is 2.6 inches tall, a slim profile that mounts cleanly on hardtops, arches, and towers without sticking up too far.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRigid Industries REVOLVE 30 Inch LED Light Bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRigid Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e430613\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774033865\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eREVOLVE\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e30 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Height\u003c\/th\u003e\n\u003ctd\u003e2.6 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Color\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBacklight\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e126 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmp Draw\u003c\/th\u003e\n\u003ctd\u003e9.4 Amp at 12 Volts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Rating\u003c\/th\u003e\n\u003ctd\u003e9 to 36 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eSpot and Flood Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRaw Lumens\u003c\/th\u003e\n\u003ctd\u003e15246\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eBlack Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Style\u003c\/th\u003e\n\u003ctd\u003eBolt-On Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Hardware\u003c\/th\u003e\n\u003ctd\u003eMounting Brackets and Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is the REVOLVE 30 inch bar?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's rated at 15,246 raw lumens from a 126 watt LED array, with a spot and flood combo beam. That's a strong close-to-mid range light. The spot reaches down the channel and the flood fills in the water right off your bow.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the amp draw and how should I wire it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It draws 9.4 amps at 12 volts. Put it on its own circuit with a dedicated fuse, use adequate wire gauge for the run from your console, and switch it through a relay rated for the load rather than a light-duty dash toggle. That keeps the beam bright and your wiring cool.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work on a 24 volt boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It accepts anything from 9 to 36 volts, so it runs on both 12V and 24V systems without a converter.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the white backlight do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The REVOLVE housing has a built-in white backlight that runs on a separate feed from the main beam. A lot of owners tie it into their nav or accent lighting so it comes on with the running lights. It gives you low-key accent light on a T-top or tower when the main beam is off.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Where should I mount a 30 inch bar on my boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"T-tops, hardtops, radar arches, wake towers, and the front rail of a center console all work. Mount it where the beam clears your hardtop and windshield so you're not lighting your own gelcoat and washing out your night vision.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the spot and flood combo better than all spot or all flood?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"For boat work, yes. The spot portion throws light out down the channel while the flood spreads it across the water right in front of you. You get reach and spread from one bar instead of running two separate lights.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with mounting hardware?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It ships with bolt-on mounting brackets and hardware. On a saltwater boat we'd swap in stainless fasteners at the mounting feet, since that's where corrosion tends to start.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I keep the brackets from loosening on a T-top?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Add a set of rubber isolators between the bracket and the mount to soak up vibration, use stainless hardware, and re-check the torque after your first couple of trips. That keeps a season of pounding chop from working the fasteners loose.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it sealed for marine use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The housing is black aluminum with a clear lens, built to shrug off weather and spray. A fresh-water rinse now and then keeps salt off the housing and hardware.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How tall is the housing?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The housing is 2.6 inches tall, a slim profile that mounts cleanly on hardtops, arches, and towers without sticking up too far.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":44787095175261,"sku":"2007104","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_34c3a983-8dfa-4481-a790-5da5ec4cbff3.jpg?v=1784991473","url":"https:\/\/nvnmarine.com\/products\/rigid-revolve-30in-led-light-bar-spot-flood","provider":"NVN Marine","version":"1.0","type":"link"}