{"product_id":"rigid-revolve-30-inch-led-light-bar-431613-amber","title":"Rigid Industries Revolve 30 Inch LED Light Bar, Amber Backlight","description":"\u003cp class=\"nvn-hero\"\u003eThe Rigid Industries Revolve 30 inch light bar puts 126 watts of white LEDs and 15,246 raw lumens behind a spot and flood combo beam, plus the Revolve line's signature integrated amber backlight. Runs 9 to 36 volts, mounts bolt-on, and ships with brackets and hardware. Built for trucks, UTVs, and overland rigs that work after dark.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Rigid Industries Revolve 30 inch light bar is a serious piece of auxiliary lighting for anyone who runs past sundown or off the pavement. It packs 126 watts of white LEDs into a 30 inch black aluminum housing, throws a spot and flood combo beam, and puts out 15,246 raw lumens. That's enough reach to light up a two-track a few hundred feet out and still wash the ditches close in. If you build trucks, run a UTV, or spend weekends overlanding, this is the kind of bar that earns a permanent spot on the rig.\u003c\/p\u003e\n\u003cp\u003eWhat sets the Revolve line apart is the integrated amber backlight. It's a low-output accent that glows behind the main optics, so the bar looks finished whether the mains are on or off. The amber sits low in the housing, so it won't wash out your night vision, and it draws next to nothing on its own circuit. Some folks run it as a marker or a courtesy light around camp. Others just like the look. Either way, it's built into the housing, not a stick-on strip that peels off in a season.\u003c\/p\u003e\n\u003cp\u003eThe beam itself is a spot and flood mix. The spot elements punch light down the trail for distance, and the flood elements spread it wide for peripheral coverage. That combo is the right call for most driving situations, where you want to see far and wide at the same time. On a work rig or a plow truck, that spread matters more than raw throw. On a desert run, the distance is what keeps you out of trouble.\u003c\/p\u003e\n\u003cp\u003ePower is where you want to plan ahead. This bar draws 9.4 amps at 12 volts, so you're going to wire it through a relay on its own fused circuit. Don't tap it into an existing accessory line and hope for the best. A 15 amp fuse and a decent relay harness will run it clean, and you'll want a switch at the dash within easy reach. The bar accepts anything from 9 to 36 volts, so it drops onto a 12 volt truck or a 24 volt system without a converter. That flexibility makes it easy to move between builds.\u003c\/p\u003e\n\u003cp\u003eMounting is bolt-on, and Rigid includes the brackets and hardware in the box. The housing stands 2.6 inches tall, so measure your bumper, roof rack, or grille opening before you commit to a spot. On steel it's straightforward. On aluminum or thinner sheet, add a backing plate so the brackets don't flex or work loose over rough terrain. And a dab of dielectric grease on the connections never hurts, especially if the rig sees mud, dust, or road salt through the winter.\u003c\/p\u003e\n\u003cp\u003eWhere does a bar like this live? Bumper mounts are the most common spot on a truck, low and out of the wind. Roof and rack mounts give you more throw over the hood but pick up more glare back off the hood in dust or fog. A lot of UTV owners run the Revolve 30 across the front cage or the roof line, where the flood spread really shines on tight trails. Whatever you pick, aim it slightly down so you're lighting the ground ahead and not blinding oncoming traffic or your own dust cloud.\u003c\/p\u003e\n\u003cp\u003eA few things this bar isn't. It's not a plug-and-play bulb swap, so budget for a proper wiring job or an afternoon with a friend who's done one before. And it's a driving and work light, not a street-legal headlight replacement, so check your local rules before you run it on the road. Used the way it's meant to be used, off the pavement, on the job site, or lighting up a campsite, the Revolve 30 is a lot of light for the money.\u003c\/p\u003e\n\u003cp\u003eEvery Revolve bar ships with the amber backlight built in, the mounting brackets, and the hardware you need to get it on the rig. There's no separate kit to buy to finish the install. Wire it through a relay, seal your connections, and it'll put down a clean, even sheet of light season after season.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e30 inch black aluminum housing puts 126 watts of white LEDs in a length that fits most bumpers, roof racks, and grille openings\u003c\/li\u003e\n  \u003cli\u003e15,246 raw lumens of spot and flood combo beam throws light far down the trail while washing the sides close in\u003c\/li\u003e\n  \u003cli\u003eIntegrated amber backlight glows behind the main optics for a finished look and a low-glare marker around camp\u003c\/li\u003e\n  \u003cli\u003e9 to 36 volt input runs on both 12 volt and 24 volt systems with no converter\u003c\/li\u003e\n  \u003cli\u003e9.4 amp draw at 12 volts wires cleanly through a single relay and a 15 amp fused circuit\u003c\/li\u003e\n  \u003cli\u003eClear lens over a black aluminum housing stands up to dust, mud, and trail abuse\u003c\/li\u003e\n  \u003cli\u003eBolt-on mounting brackets and hardware included in the box, no extra kit to buy\u003c\/li\u003e\n  \u003cli\u003e2.6 inch housing height keeps the bar low enough for grille and bumper mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Rigid Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat beam pattern does the Revolve 30 put out?\u003c\/summary\u003e\n    \u003cp\u003eA spot and flood combo. The spot elements throw light far down the trail for distance, and the flood elements spread it wide for peripheral coverage, so you see far and wide at the same time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is it?\u003c\/summary\u003e\n    \u003cp\u003e15,246 raw lumens from 126 watts of white LEDs. That's plenty to light a two-track a few hundred feet out while still washing the sides close in.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage does it run on?\u003c\/summary\u003e\n    \u003cp\u003eAnything from 9 to 36 volts. It drops onto a 12 volt truck or a 24 volt system without a converter, so it's easy to move between builds.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much current does it draw?\u003c\/summary\u003e\n    \u003cp\u003e9.4 amps at 12 volts. Wire it through a relay on its own fused circuit, a 15 amp fuse and a decent relay harness will run it clean.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the amber backlight for?\u003c\/summary\u003e\n    \u003cp\u003eIt's an integrated low-output amber accent that glows behind the main optics. People run it as a marker or a courtesy light around camp, and it gives the bar a finished look with the mains off. It's built into the housing, not a stick-on strip.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with mounting hardware?\u003c\/summary\u003e\n    \u003cp\u003eYes. Rigid includes the bolt-on brackets and hardware in the box. There's no separate kit to buy to finish the install.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow big is the bar and will it fit my bumper?\u003c\/summary\u003e\n    \u003cp\u003eIt's 30 inches long and the housing stands 2.6 inches tall. Measure your bumper, roof rack, or grille opening before you commit to a mounting spot.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it street legal?\u003c\/summary\u003e\n    \u003cp\u003eIt's a driving and work light, not a street-legal headlight replacement. Check your local rules before you run it on the road, and aim it slightly down so you're not blinding oncoming traffic.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I run it on a 24 volt system?\u003c\/summary\u003e\n    \u003cp\u003eYes. The 9 to 36 volt input covers 12 volt and 24 volt systems alike, no converter needed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's included in the box?\u003c\/summary\u003e\n    \u003cp\u003eThe 30 inch bar with the amber backlight built in, plus the bolt-on mounting brackets and hardware. You supply the wiring, a relay, a fuse, and a switch.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRigid Industries Revolve 30 Inch LED Light Bar with Amber Backlight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRigid Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e431613\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774034060\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eRevolve\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e30 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e2.6 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e126 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmp Draw\u003c\/th\u003e\n\u003ctd\u003e9.4 Amp at 12 Volts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Rating\u003c\/th\u003e\n\u003ctd\u003e9 to 36 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eSpot and Flood\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRaw Lumens\u003c\/th\u003e\n\u003ctd\u003e15246\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eBlack Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBacklight\u003c\/th\u003e\n\u003ctd\u003eAmber\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Style\u003c\/th\u003e\n\u003ctd\u003eBolt-On Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Hardware\u003c\/th\u003e\n\u003ctd\u003eMounting brackets and hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What beam pattern does the Revolve 30 put out?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A spot and flood combo. The spot elements throw light far down the trail for distance, and the flood elements spread it wide for peripheral coverage, so you see far and wide at the same time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"15,246 raw lumens from 126 watts of white LEDs. That's plenty to light a two-track a few hundred feet out while still washing the sides close in.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage does it run on?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Anything from 9 to 36 volts. It drops onto a 12 volt truck or a 24 volt system without a converter, so it's easy to move between builds.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much current does it draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"9.4 amps at 12 volts. Wire it through a relay on its own fused circuit, a 15 amp fuse and a decent relay harness will run it clean.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the amber backlight for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's an integrated low-output amber accent that glows behind the main optics. People run it as a marker or a courtesy light around camp, and it gives the bar a finished look with the mains off. It's built into the housing, not a stick-on strip.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with mounting hardware?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Rigid includes the bolt-on brackets and hardware in the box. There's no separate kit to buy to finish the install.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How big is the bar and will it fit my bumper?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's 30 inches long and the housing stands 2.6 inches tall. Measure your bumper, roof rack, or grille opening before you commit to a mounting spot.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it street legal?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a driving and work light, not a street-legal headlight replacement. Check your local rules before you run it on the road, and aim it slightly down so you're not blinding oncoming traffic.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I run it on a 24 volt system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The 9 to 36 volt input covers 12 volt and 24 volt systems alike, no converter needed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's included in the box?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The 30 inch bar with the amber backlight built in, plus the bolt-on mounting brackets and hardware. You supply the wiring, a relay, a fuse, and a switch.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":44787102220381,"sku":"2007105","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_23439c14-52cb-4cfa-86d3-fb8ab134c502.jpg?v=1784991514","url":"https:\/\/nvnmarine.com\/products\/rigid-revolve-30-inch-led-light-bar-431613-amber","provider":"NVN Marine","version":"1.0","type":"link"}