{"product_id":"rigid-revolve-20-inch-led-light-bar-amber-backlight","title":"Rigid Industries Revolve 20 Inch LED Light Bar, Amber Backlight","description":"\u003cp class=\"nvn-hero\"\u003eThe Rigid Industries Revolve 20 inch light bar throws 10164 raw lumens of white LED down the trail, with a Broad Spot beam that reaches long and spreads wide at once. The signature amber backlight runs independently for dust, fog, or a clean accent. Low 6.3 amp draw, 9 to 36 volt input, and mount hardware in the box.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Rigid Industries Revolve 20 inch light bar is built for people who don't stop driving when the sun goes down. It's a 20-inch bar running white LEDs behind a clear lens, and Rigid rates it at 10164 raw lumens. That's enough light to turn a black two-track into something you can actually read at speed. If you run a truck, a UTV, or an overland rig and you've been squinting past your factory headlights, this is the kind of upgrade you feel the first night out.\u003c\/p\u003e\n\u003cp\u003eWhat sets the Revolve apart from a plain light bar is the Broad Spot optical system. Rigid combined a spot and a flood pattern into one beam, so you get distance and spread at the same time. The spot reaches way down the trail for early warning, and the flood fills in the edges so you're not driving through a tunnel. On a fast dirt road that combination is exactly what you want. You see the corner coming, and you see what's sitting in the ditch beside it.\u003c\/p\u003e\n\u003cp\u003eThen there's the amber backlight, which is what the Revolve name is really about. Around the face of the bar sits a trim ring that lights up independently of the main white LEDs. You can run amber, or leave the white forward lighting on by itself. Amber cuts through dust and light fog better than white does, and it's easy on the eyes for slow crawling or working around camp. A lot of folks wire the backlight to its own switch so they can flip between hard white driving light and a softer amber accent without touching the main beam. It looks sharp parked, too, if you care about that.\u003c\/p\u003e\n\u003cp\u003ePower draw is friendly for a bar this bright. It pulls 84 watts, which works out to about 6.3 amps at 12 volts. That matters on a UTV or a smaller electrical system where you don't have amps to spare. The bar accepts anything from 9 to 36 volts, so it drops onto a 12-volt truck or a 24-volt rig without a converter. Just size your wire and fuse to the load and you're set. We'd run a relay and a fused circuit straight off the battery rather than tapping an existing accessory line, and you'll want an inline switch for the main beam plus a second one if you're going to control the amber separately.\u003c\/p\u003e\n\u003cp\u003eThe housing is high-grade aluminum alloy with an impact-resistant nylon bezel and a textured powder-coat finish. It's meant to take rock chips and trail debris and keep looking right. At 6.2 pounds it's substantial without being a boat anchor on a light bracket. The clear lens keeps the beam crisp, and the whole unit is designed to shrug off vibration, weather, and the kind of abuse a front bumper or roof line sees on a regular basis.\u003c\/p\u003e\n\u003cp\u003eMounting is straightforward. The Revolve uses Rigid's E-Series mounting footprint, so if you've already got E-Series brackets or a bumper cut for that pattern, this bar bolts right in. Rigid includes the mount brackets and hardware in the box, so you're not hunting for parts to get it hung. One thing to know up front: the wiring harness and switch are sold separately. That's normal for a bar at this level because everybody's install is a little different, but budget for a harness and a switch when you order so you're not stuck halfway through the job.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anybody who actually uses their rig after dark. Overlanders covering ground on unlit forest roads, hunters and ranchers moving around the property at night, UTV owners who want real reach out of a low-draw bar, and truck folks who want a clean 20-inch bar with a lighting signature that stands out. It's a 20-inch bar, so it fits a lot of bumper openings and roof spots without dominating the whole front end. If you need to light up a wider swath, Rigid makes the Revolve in longer lengths, but for most half-ton and mid-size builds the 20-inch hits the sweet spot.\u003c\/p\u003e\n\u003cp\u003eBottom line, the Revolve gives you strong forward reach, a genuinely useful amber accent, and Rigid's Limited Lifetime Warranty behind it. It isn't the cheapest bar you can bolt on. But it's the kind of light you buy once and forget about, which is exactly what you want hanging off the front of a truck that lives outside.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eBroad Spot optical system blends spot and flood into one beam for long reach and wide fill at the same time\u003c\/li\u003e\n  \u003cli\u003e10164 raw lumens of white LED output for real distance on unlit trails and back roads\u003c\/li\u003e\n  \u003cli\u003eIndependently controlled amber backlight trim ring cuts dust and fog and doubles as a soft accent or area light\u003c\/li\u003e\n  \u003cli\u003eLow 84-watt draw, about 6.3 amps at 12 volts, easy on UTV and small electrical systems\u003c\/li\u003e\n  \u003cli\u003eWide 9 to 36 volt input runs on 12-volt or 24-volt systems with no converter\u003c\/li\u003e\n  \u003cli\u003eHigh-grade aluminum alloy housing with impact-resistant nylon bezel and textured powder-coat finish\u003c\/li\u003e\n  \u003cli\u003eClear lens for a crisp, uninterrupted beam\u003c\/li\u003e\n  \u003cli\u003eE-Series mounting footprint with mount brackets and hardware included in the box\u003c\/li\u003e\n  \u003cli\u003e20-inch length fits most bumper openings and roof mounts without crowding the build\u003c\/li\u003e\n  \u003cli\u003e6.2 pound weight, substantial but light enough for standard brackets\u003c\/li\u003e\n  \u003cli\u003eBacked by the Rigid Industries Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Rigid Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is the Revolve 20 inch light bar?\u003c\/summary\u003e\n    \u003cp\u003eRigid rates it at 10164 raw lumens from its white LEDs. Paired with the Broad Spot optics, that light gets thrown both far down the trail and out to the sides, so you're not driving through a narrow tunnel of light.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the difference between the white light and the amber backlight?\u003c\/summary\u003e\n    \u003cp\u003eThe white LEDs are your main forward driving light. The amber backlight is a separate trim ring around the face of the bar that you control on its own. Amber cuts through dust and fog and works as a soft accent or area light, so you can run it without the main white beam.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much power does it draw?\u003c\/summary\u003e\n    \u003cp\u003eIt pulls 84 watts, which is about 6.3 amps at 12 volts. That's a light load for a bar this bright, which makes it a good fit for UTVs and smaller electrical systems.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I run it on a 24-volt system?\u003c\/summary\u003e\n    \u003cp\u003eYes. The Revolve accepts 9 to 36 volts, so it works on a 12-volt truck or a 24-volt rig without any converter. Just size your wire and fuse to the load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a wiring harness and switch?\u003c\/summary\u003e\n    \u003cp\u003eNo. The mount brackets and hardware are included in the box, but the wiring harness and switch are sold separately. We'd wire it through a relay on a fused circuit off the battery, with an inline switch for the main beam and a second switch if you want to control the amber separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat beam pattern does it have?\u003c\/summary\u003e\n    \u003cp\u003eIt uses Rigid's Broad Spot optical system, which combines a spot and a flood pattern in one beam. You get distance from the spot and spread from the flood at the same time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it fit my existing brackets?\u003c\/summary\u003e\n    \u003cp\u003eThe Revolve uses Rigid's E-Series mounting dimensions. If your bumper or roof mount is already cut for the E-Series footprint, or you have E-Series brackets, this bar bolts right in.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it tough enough for off-road use?\u003c\/summary\u003e\n    \u003cp\u003eIt's built for it. The housing is high-grade aluminum alloy with an impact-resistant nylon bezel and a textured powder-coat finish, designed to take rock chips, vibration, and weather.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much does it weigh?\u003c\/summary\u003e\n    \u003cp\u003eAbout 6.2 pounds. It's substantial but light enough to hang off standard brackets without stressing the mount.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat warranty does it carry?\u003c\/summary\u003e\n    \u003cp\u003eIt's backed by the Rigid Industries Limited Lifetime Warranty. We're an authorized Rigid reseller, so any warranty claim runs through us.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRigid Industries Revolve 20 Inch LED Light Bar with Amber Backlight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRigid Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e421613\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774034053\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e6.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eRevolve\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e2.6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eBroad Spot (Spot and Flood combo)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRaw Lumens\u003c\/th\u003e\n\u003ctd\u003e10164\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower Draw\u003c\/th\u003e\n\u003ctd\u003e84 Watts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e6.3 A at 12 Volts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Rating\u003c\/th\u003e\n\u003ctd\u003e9 to 36 Volts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Color\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBacklight\u003c\/th\u003e\n\u003ctd\u003eAmber, independently controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eHigh-grade aluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBezel\u003c\/th\u003e\n\u003ctd\u003eImpact-resistant nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eTextured powder-coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Style\u003c\/th\u003e\n\u003ctd\u003eBolt-On\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Compatibility\u003c\/th\u003e\n\u003ctd\u003eE-Series mounting dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Hardware\u003c\/th\u003e\n\u003ctd\u003eMount brackets and hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLimited Lifetime Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is the Revolve 20 inch light bar?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Rigid rates it at 10164 raw lumens from its white LEDs. Paired with the Broad Spot optics, that light gets thrown both far down the trail and out to the sides, so you're not driving through a narrow tunnel of light.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the difference between the white light and the amber backlight?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The white LEDs are your main forward driving light. The amber backlight is a separate trim ring around the face of the bar that you control on its own. Amber cuts through dust and fog and works as a soft accent or area light, so you can run it without the main white beam.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much power does it draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It pulls 84 watts, which is about 6.3 amps at 12 volts. That's a light load for a bar this bright, which makes it a good fit for UTVs and smaller electrical systems.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I run it on a 24-volt system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The Revolve accepts 9 to 36 volts, so it works on a 12-volt truck or a 24-volt rig without any converter. Just size your wire and fuse to the load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a wiring harness and switch?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The mount brackets and hardware are included in the box, but the wiring harness and switch are sold separately. We'd wire it through a relay on a fused circuit off the battery, with an inline switch for the main beam and a second switch if you want to control the amber separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What beam pattern does it have?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It uses Rigid's Broad Spot optical system, which combines a spot and a flood pattern in one beam. You get distance from the spot and spread from the flood at the same time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it fit my existing brackets?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The Revolve uses Rigid's E-Series mounting dimensions. If your bumper or roof mount is already cut for the E-Series footprint, or you have E-Series brackets, this bar bolts right in.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it tough enough for off-road use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built for it. The housing is high-grade aluminum alloy with an impact-resistant nylon bezel and a textured powder-coat finish, designed to take rock chips, vibration, and weather.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much does it weigh?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"About 6.2 pounds. It's substantial but light enough to hang off standard brackets without stressing the mount.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What warranty does it carry?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's backed by the Rigid Industries Limited Lifetime Warranty. We're an authorized Rigid reseller, so any warranty claim runs through us.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":44787787432029,"sku":"2007206","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_d91a90f4-8125-498d-af2d-cf55daeb8caa.jpg?v=1784996575","url":"https:\/\/nvnmarine.com\/products\/rigid-revolve-20-inch-led-light-bar-amber-backlight","provider":"NVN Marine","version":"1.0","type":"link"}