RIGID Phoenix XL Clear Replacement Lens, Spot Beam
RIGID Phoenix XL Clear Replacement Lens, Spot Beam — Product description
Bring a damaged RIGID Phoenix XL pod back to life. This is the factory clear replacement lens, a 7-inch square polycarbonate optic that drops right in and throws a tight 20-degree spot beam. It ships with a fresh gasket so your pod stays sealed and watertight after the swap.
Cracked a lens on your RIGID Phoenix XL pods? This is the exact clear replacement RIGID makes for them. It's a 7-inch square polycarbonate lens that drops straight into a Phoenix XL housing, so you can bring a scratched, hazed, or shattered pod back to full output without buying a whole new light.
The clear optic here throws a spot beam. Rated at 20 degrees horizontal and 15.8 degrees vertical, it's a tight, focused pattern built for distance. That's the beam you want punching down a dark channel, lighting the far bank on a night run, or reaching out past the bow where a wide flood would just fall short. If your Phoenix XL was set up as a spotlight and the lens took a hit, this puts it right back the way it was.
Polycarbonate is the right call out on the water. It shrugs off the stuff that kills glass, rocks kicked up off a trailer, dock bumps, a wrench dropped during rigging. It flexes instead of shattering, and it holds up to UV and salt spray season after season. This is the same material RIGID uses on the original lens, so you're not stepping down in quality.
Each package is a single lens, and it ships with a fresh gasket. That gasket matters. It's what keeps water out of the pod, so swapping it along with the lens is how you keep your Phoenix XL properly sealed. Reusing an old, compressed gasket is asking for fogging and corrosion down the line. Do it once, do it right.
Installation is straightforward for anyone comfortable with a screwdriver. Pull the retaining ring, lift the damaged lens, seat the new gasket, drop in the clear lens, and button it back up. No rewiring, no re-aiming the pod. Twenty minutes at the bench and you're back in business.
One note on fitment. This lens is made specifically for the Phoenix XL pod, and it's the clear, spot-beam version. If you're running a different RIGID series, or you want a diffused or flood pattern, that's a different part number, so double-check your pod before you order.
Key Features
- 7-inch square clear polycarbonate lens, a direct replacement for RIGID Phoenix XL pod lights
- Spot beam optic rated 20 degrees horizontal by 15.8 degrees vertical for tight, long-distance throw
- Polycarbonate construction resists impact, UV, and salt spray far better than glass
- Ships as a single lens with a fresh sealing gasket to keep the pod watertight
- Clear lens preserves maximum light output with no color shift
- Direct drop-in fit, no rewiring and no re-aiming required
Why Buy from NVN Marine
- Authorized RIGID Industries reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Replacement Lens For Phoenix XL Pod Lights; 7 Inch Square; Clear; Polycarbonate Plastic; Single; With Gasket; Spot Beam Pattern; 20 Degree Horizontal/ 15.8 Degree Vertical Beam Angle |
|---|---|
| Brand | RIGID Industries |
| Manufacturer Part Number | 168249 |
| UPC | 849774037276 |
| Fits | Phoenix XL Pod Lights |
| Lens Size | 7 Inch Square |
| Lens Color | Clear |
| Lens Material | Polycarbonate Plastic |
| Quantity | Single |
| Gasket Included | Yes |
| Beam Pattern | Spot |
| Horizontal Beam Angle | 20 Degrees |
| Vertical Beam Angle | 15.8 Degrees |
Frequently asked questions
What does this replacement lens fit?
It's made specifically for RIGID Phoenix XL pod lights. It's the 7-inch square clear version, so it drops into a Phoenix XL housing without any modification.
What beam pattern does this lens produce?
This is the spot optic. It throws a focused beam rated at 20 degrees horizontal and 15.8 degrees vertical, built for reaching out to a distance rather than lighting up a wide area close in.
Does it come with a gasket?
Yes. Each package includes a single lens and a fresh sealing gasket. Installing the new gasket is what keeps water out of the pod, so swap both together.
What is the lens made of?
Polycarbonate plastic, the same material RIGID uses on the original. It resists impact and UV far better than glass, which is what you want on a boat or a trailer.
How many lenses are in the package?
One. This is a single-lens replacement, so if you need to redo more than one pod, order a lens for each pod.
Is this hard to install?
Not at all. Pull the retaining ring, lift out the old lens, seat the new gasket, drop in the clear lens, and reassemble. No rewiring and no re-aiming. Most folks have it done in about twenty minutes.
