RIGID Phoenix Pod Light Combo Replacement Lens 168251
RIGID Phoenix Pod Light Combo Replacement Lens 168251 — Product description
This is the factory replacement combo lens for RIGID Phoenix pod lights, molded in clear polycarbonate with the gasket already fitted. It swaps a scratched or hazed lens back to clear and shapes the beam into a spot-and-driving combo pattern, 33.4 degrees across and 18.5 degrees tall. Quick fix, right beam, back out there.
Rock guards, trail debris, and years of UV take a toll on any light lens. When the front of your RIGID Phoenix pod light gets sandblasted, hazed, or cracked, you don't have to replace the whole light. This is the genuine RIGID replacement lens, 7 inches square, cut for the Phoenix pod housing and shipped as a single piece with the gasket already fitted.
What makes this one worth knowing about is the optic. It's a combo lens, so it throws a spot and a driving pattern at the same time. You get 33.4 degrees of horizontal spread and 18.5 degrees of vertical, which means a tight, far-reaching hot center with enough width to light up the edges of the trail or the water in front of you. Swap in this lens and you change how the same Phoenix light behaves, from whatever pattern it had into a combo beam that reaches out and still fills the foreground.
Install is straightforward. Pull the old lens and gasket, seat the new gasket, drop the clear polycarbonate lens in, and button the housing back up. Because the gasket comes with the lens, you're not hunting for a separate seal to keep water and dust out of the light. Do it at the bench or right on the vehicle. Ten minutes with hand tools and you're back in business.
Polycarbonate is the right material for a light that lives outside. It shrugs off impacts that would shatter glass, handles temperature swings, and stays clear over time. This is a clear lens, so it passes the light's native output straight through with no tint or color shift. If your old lens has gone milky or picked up a spider crack, this brings the beam right back to where it should be.
One lens per package. It's built specifically for the RIGID Phoenix and Phoenix XL pod light platform, so check that your light is a Phoenix before you order. Running a pair of pods up front? Order two so both sides match.
Key Features
- 7-inch square lens sized for the RIGID Phoenix pod light housing, so it drops into the factory opening
- Combo beam optic delivers a spot and driving pattern together, a far-reaching hot center with usable width
- 33.4 degree horizontal by 18.5 degree vertical beam angle for reach plus foreground coverage
- Molded clear polycarbonate resists impact and UV where glass would crack or haze
- Gasket included in the package, so the water and dust seal goes back in with the lens
- Sold as a single lens, genuine RIGID replacement part number 168251
Why Buy from NVN Marine
- Authorized RIGID Industries reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Replacement Lens for Phoenix Pod Lights, 7 Inch Square, Clear, Polycarbonate Plastic, Single, With Gasket, Spot and Driving Combo Beam Pattern, 33.4 Degree Horizontal / 18.5 Degree Vertical Beam Angle |
|---|---|
| Brand | RIGID Industries |
| Manufacturer Part Number | 168251 |
| UPC | 849774037290 |
| Lens Size | 7 Inch Square |
| Material | Polycarbonate Plastic |
| Lens Color | Clear |
| Beam Pattern | Spot and Driving Combo |
| Horizontal Beam Angle | 33.4 Degrees |
| Vertical Beam Angle | 18.5 Degrees |
| Gasket | Included |
| Quantity | Single |
| Fits | RIGID Phoenix / Phoenix XL Pod Lights |
Frequently asked questions
Will this fit my RIGID Phoenix pod light?
It's the factory replacement lens for the RIGID Phoenix and Phoenix XL pod lights, 7 inches square. Confirm your light is a Phoenix pod before ordering.
What beam pattern does this lens produce?
A spot and driving combo, 33.4 degrees horizontal and 18.5 degrees vertical. You get a far-reaching center with enough spread to light the edges.
Does the lens come with a gasket?
Yes. The gasket ships fitted with the lens, so you have the seal you need to keep water and dust out of the housing.
How many lenses are in the package?
One. It's sold as a single lens, so order two if you're servicing a pair of pods.
What is the lens made of?
Clear polycarbonate. It handles impacts and UV better than glass and passes the light's color through with no tint.
Can I change my Phoenix light's beam by swapping this lens?
Yes. The optic is built into the lens, so installing this combo lens gives that Phoenix pod a spot-and-driving combo beam.
