{"product_id":"rigid-industries-sr-m-pro-912313-led-driving-light","title":"Rigid Industries SR-M PRO 912313 LED Driving Light","description":"\u003cp class=\"nvn-hero\"\u003eThe Rigid Industries SR-M PRO 912313 is a compact surface-mount LED light that punches well above its size. It runs a driving beam from a 2 by 3 inch housing, pulls just 1.64 amps at 12 volts, and throws 2376 raw lumens down the line. When you need extra reach off the hardtop, a tower, or a rig, this is the light that earns a permanent spot.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Rigid Industries SR-M PRO is one of those lights you bolt on once and forget about, in the best way. It's a surface-mount LED in a 2 inch by 3 inch rectangular housing, wired for a driving beam, and it puts out 2376 raw lumens while only drawing 1.64 amps at 12 volts. That's a lot of usable light for almost no load on your electrical system. On a boat that means you can add a pair without rethinking your fuse block, and on a rig it means the same.\u003c\/p\u003e\n\u003cp\u003eThe beam here is a driving pattern. That's a focused, longer throw meant to reach out ahead of you rather than wash light close and wide. So it's the right pick when you want to see distance, a channel marker, a dock approach at range, or the trail past your headlights. If you're after a broad close-in wash for the cockpit or the deck right around the boat, a flood pattern suits that job better. Plenty of owners run a driving light like this one for reach and pair it with a wider light for the near field.\u003c\/p\u003e\n\u003cp\u003eBuild quality is where the SR-M PRO earns its keep. The housing is powder-coated black aluminum with rear cooling fins, so the LEDs shed heat and hold their output instead of throttling back after a few minutes on. The lens is unbreakable clear Lexan, not glass, which is exactly what you want on a light that's going to eat spray, gravel, and the occasional knock. It's rated for off-road use, and that same overbuilt housing is why these hold up on hardtops and towers that take a pounding at speed.\u003c\/p\u003e\n\u003cp\u003eOne thing we'll tell you straight: this is an off-road and auxiliary light, not a certified navigation light. Don't wire it in place of your running lights or your all-round white. Use it for working light, spotting, and reach, and keep your legal nav lighting separate. That's how it's meant to be run.\u003c\/p\u003e\n\u003cp\u003eThe kit is genuinely complete, which we appreciate. You get the single light, mounting hardware, a stainless steel U-shape bracket, a solid black light cover for when it's parked, and a wiring harness with an inline switch and a Deutsch connector. The Deutsch fitting is a sealed, positive-lock connector, so your power connection stays dry and doesn't back out on a rough ride. That's a nice touch at this size. Between the bracket and the harness, most folks have everything they need to get it mounted and switched in an afternoon.\u003c\/p\u003e\n\u003cp\u003eA couple of install notes from experience. The U-bracket mounts to a flat surface, and on thin aluminum consoles or fiberglass it's worth backing the fasteners with a plate or large washers so the tabs don't work loose over time. Run appropriately sized wire for the distance, the draw is low but a long run on undersized wire will dim any light. And if you're on saltwater, give the fins and hardware a fresh-water rinse now and then. The powder coat and stainless bracket handle the marine environment well, but salt loves to sit in cooling fins.\u003c\/p\u003e\n\u003cp\u003eSo who's this for? Anglers and boaters who want a tough, low-draw spot of reach on a hardtop or tower. Off-roaders adding a clean driving light without a big amp penalty. Anybody who values a light that comes with the bracket, the harness, and the switch already in the box instead of a parts hunt afterward. It's a small light with a serious build, and at just 1.64 amps of draw it's about the easiest and cleanest upgrade you can make to how far you can actually see after dark.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eDriving beam pattern for focused, long-distance reach ahead of the boat or vehicle\u003c\/li\u003e\n  \u003cli\u003e2376 raw lumens from a compact 2 inch by 3 inch rectangular housing\u003c\/li\u003e\n  \u003cli\u003eLow 1.64 amp draw at 12 volts, easy to add a pair without straining your electrical system\u003c\/li\u003e\n  \u003cli\u003eUnbreakable clear Lexan lens shrugs off spray, gravel, and impacts where glass would crack\u003c\/li\u003e\n  \u003cli\u003ePowder-coated black aluminum housing with rear cooling fins for stable output under sustained use\u003c\/li\u003e\n  \u003cli\u003eStainless steel U-shape mounting bracket and hardware included in the box\u003c\/li\u003e\n  \u003cli\u003eWiring harness with inline switch and sealed Deutsch connector included\u003c\/li\u003e\n  \u003cli\u003eSolid black snap-on light cover included to protect the lens when parked\u003c\/li\u003e\n  \u003cli\u003eSurface-mount design fits hardtops, towers, bumpers, and consoles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Rigid Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat beam pattern does the SR-M PRO 912313 have?\u003c\/summary\u003e\n    \u003cp\u003eIt's a driving beam, which is a focused, longer-throw pattern that reaches out ahead of you rather than washing light close and wide. It puts out 2376 raw lumens. If you want a broad close-in wash for the deck or cockpit, a flood pattern is the better tool for that job.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much power does it draw?\u003c\/summary\u003e\n    \u003cp\u003eJust 1.64 amps at 12 volts. That's low enough that you can add a pair without rethinking your fuse block or worrying about the load on your electrical system.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat comes in the box?\u003c\/summary\u003e\n    \u003cp\u003eA single light, mounting hardware, a stainless steel U-shape bracket, a solid black light cover, and a wiring harness with an inline switch and a Deutsch connector. It's a complete kit, so you're not hunting for parts to get it mounted and switched.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the lens glass?\u003c\/summary\u003e\n    \u003cp\u003eNo, it's unbreakable clear Lexan. That's exactly what you want on a light that's going to take spray, gravel, and the occasional knock. It won't shatter the way a glass lens can.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use this as a navigation light?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's rated for off-road and auxiliary use, not as a certified navigation light. Use it for working light, spotting, and reach, and keep your legal running lights and all-round white separate.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount?\u003c\/summary\u003e\n    \u003cp\u003eIt surface-mounts using the included stainless steel U-shape bracket and hardware. On thin aluminum consoles or fiberglass, back the fasteners with a plate or large washers so the bracket tabs stay tight over time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a switch and a way to wire it?\u003c\/summary\u003e\n    \u003cp\u003eYes. The included harness has an inline switch and a Deutsch connector, which is a sealed, positive-lock fitting that keeps your power connection dry and won't back out on a rough ride.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it hold up on a saltwater boat?\u003c\/summary\u003e\n    \u003cp\u003eThe powder-coated aluminum housing and stainless bracket handle the marine environment well. Give the cooling fins and hardware a fresh-water rinse now and then, since salt likes to settle into the fins.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size wire should I run?\u003c\/summary\u003e\n    \u003cp\u003eThe draw is low at 1.64 amps, but a long run on undersized wire will dim any light. Size the wire for the length of your run so you get full output at the light.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does SR-M PRO mean?\u003c\/summary\u003e\n    \u003cp\u003eSR-M is the surface-mount version of Rigid Industries' SR line, and this is the PRO driving configuration. It's the compact, low-profile format built to bolt onto a flat surface rather than clamp to a bar.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRigid Industries SR-M PRO 912313 LED Driving Light\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRigid Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e912313\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774027796\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eSR-M PRO\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Pattern\u003c\/th\u003e\n\u003ctd\u003eDriving Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRaw Lumens\u003c\/th\u003e\n\u003ctd\u003e2376 Lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Power\u003c\/th\u003e\n\u003ctd\u003e23 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmp Draw\u003c\/th\u003e\n\u003ctd\u003e1.64 Amp at 12 Volts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens Size\u003c\/th\u003e\n\u003ctd\u003e2 Inch x 3 Inch Rectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens Material\u003c\/th\u003e\n\u003ctd\u003eUnbreakable Clear Lexan\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003ePowder Coated Black Aluminum with Rear Cooling Fins\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Style\u003c\/th\u003e\n\u003ctd\u003eSurface Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003ctd\u003eStainless Steel U-Shape\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eDeutsch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eSingle Light, Mounting Hardware, Stainless Steel U-Shape Bracket, Solid Black Light Cover, Harness with Switch, Deutsch Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRated Use\u003c\/th\u003e\n\u003ctd\u003eOff-Road Use Only\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eKeystone Part Number\u003c\/th\u003e\n\u003ctd\u003eR2G912313\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What beam pattern does the SR-M PRO 912313 have?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a driving beam, which is a focused, longer-throw pattern that reaches out ahead of you rather than washing light close and wide. It puts out 2376 raw lumens. If you want a broad close-in wash for the deck or cockpit, a flood pattern is the better tool for that job.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much power does it draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Just 1.64 amps at 12 volts. That's low enough that you can add a pair without rethinking your fuse block or worrying about the load on your electrical system.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What comes in the box?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A single light, mounting hardware, a stainless steel U-shape bracket, a solid black light cover, and a wiring harness with an inline switch and a Deutsch connector. It's a complete kit, so you're not hunting for parts to get it mounted and switched.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the lens glass?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, it's unbreakable clear Lexan. That's exactly what you want on a light that's going to take spray, gravel, and the occasional knock. It won't shatter the way a glass lens can.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this as a navigation light?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's rated for off-road and auxiliary use, not as a certified navigation light. Use it for working light, spotting, and reach, and keep your legal running lights and all-round white separate.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It surface-mounts using the included stainless steel U-shape bracket and hardware. On thin aluminum consoles or fiberglass, back the fasteners with a plate or large washers so the bracket tabs stay tight over time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a switch and a way to wire it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The included harness has an inline switch and a Deutsch connector, which is a sealed, positive-lock fitting that keeps your power connection dry and won't back out on a rough ride.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it hold up on a saltwater boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The powder-coated aluminum housing and stainless bracket handle the marine environment well. Give the cooling fins and hardware a fresh-water rinse now and then, since salt likes to settle into the fins.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size wire should I run?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The draw is low at 1.64 amps, but a long run on undersized wire will dim any light. Size the wire for the length of your run so you get full output at the light.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does SR-M PRO mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"SR-M is the surface-mount version of Rigid Industries' SR line, and this is the PRO driving configuration. It's the compact, low-profile format built to bolt onto a flat surface rather than clamp to a bar.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":45048076763229,"sku":"2008056","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_8629c3fe-97f4-4d2d-9b06-cc672a83f4cf.jpg?v=1789353774","url":"https:\/\/nvnmarine.com\/products\/rigid-industries-sr-m-pro-912313-led-driving-light","provider":"NVN Marine","version":"1.0","type":"link"}