{"product_id":"rigid-industries-5-inch-spot-led-10-104-lumens","title":"RIGID Industries Phoenix POD 5-Inch Spot LED Light","description":"\u003cp class=\"nvn-hero\"\u003eThe RIGID Industries Phoenix POD is a 5-inch square spot-beam LED that pulls 134 watts and throws 10,104 lumens into a tight, long-reaching column. Cast aluminum housing, sealed Deutsch connector, and a stainless U-bracket included. It's the light you flip on when you need to see something a long way off.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe RIGID Industries Phoenix POD is a 5-inch square spot-beam LED that's built to throw light a long way down the line. It draws 134 watts and puts out 10,104 lumens, and the spot lens focuses all of that into a tight column instead of spilling it everywhere. So when you need to pick out a channel marker, a mooring, a trail marker, or the far side of a field well past where your factory lights give up, this is the one you flip on.\u003c\/p\u003e\n\u003cp\u003eLet's talk about what a spot beam really means, because it matters. A flood washes a wide area up close. A spot does the opposite. It reaches. The Phoenix POD ships with the clear spot lens already installed, so out of the box you get the long, narrow throw. That's exactly what you want mounted high on a hardtop, an arch, a roof rack, or a bumper where you're trying to see distance, not light up your own bow. The clear lens keeps the beam true and white too, with no amber tint cutting your output.\u003c\/p\u003e\n\u003cp\u003eThe build is straightforward and honest. The housing is black cast aluminum, and it does two jobs. It pulls heat off the LEDs so they hold their output, and it takes vibration and knocks without complaint. The electrical side runs through a sealed Deutsch connector, the same weatherproof connection you'll find on serious off-road and marine wiring. It keeps water and corrosion out of the pins, which is the usual failure point on cheaper lights. And because it's a sealed unit, there's nothing to fog up or let moisture creep in behind the lens over time.\u003c\/p\u003e\n\u003cp\u003eA quick word on power, because 10,104 lumens isn't free. The Phoenix POD pulls 9.6 amps at 14 volts DC. That's real current. Wire it with at least 10-gauge and protect the circuit with a 15-amp fuse, and run it through a relay if you're triggering it off a dash switch. On longer runs, say anything past 15 feet or so, step up the wire gauge to keep voltage drop from dimming your output. Do it right the first time and you'll never think about it again.\u003c\/p\u003e\n\u003cp\u003eMounting is surface-mount, and RIGID includes a stainless steel U-shape bracket plus the hardware to hang it. The stainless holds up outdoors and won't streak rust down your gelcoat or paint. One tip from experience: after your first season, pull the bracket bolts and hit them with a little threadlocker and locknuts. Any high-output light on a platform that vibrates, a T-top, a trailer, a UTV, wants that bit of insurance so it stays aimed where you set it.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anybody who needs to see far in the dark and is tired of squinting. Center-console owners running back to the ramp after sunset. Overlanders and truck folks who want a proper distance light. Anyone adding auxiliary lighting to a hardtop, arch, or bumper. Aim it slightly down, 5 to 10 degrees, so you're lighting the water or the road and not blinding whoever's coming the other way. That one adjustment turns a spot beam from obnoxious into genuinely useful.\u003c\/p\u003e\n\u003cp\u003eWhat it's not is a work light for close-up tasks. It's a spot, not a flood, so don't expect it to light up the whole cockpit or a wide worksite. If you want both reach and spread, plenty of folks run this next to a flood or a wider light on the same bar, so you get distance and coverage together. But for pure reach in a compact 5-inch package, the Phoenix POD earns its place.\u003c\/p\u003e\n\u003cp\u003eOne more thing worth saying. This is a genuine RIGID Industries light, and we're an authorized dealer, so it carries the full factory warranty. That matters on a light at this price. LEDs are only as good as the driver and the thermal design behind them, and that's where the cast aluminum housing and RIGID's engineering earn their keep. You're paying for output that holds up over years, not a bright number on a box that fades after a season.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e10,104 lumens of output from a 134-watt LED, enough to light a target several hundred yards out\u003c\/li\u003e\n  \u003cli\u003eTrue spot beam pattern concentrates light into a tight column for maximum reach\u003c\/li\u003e\n  \u003cli\u003e9.6 amp draw at 14V DC, wire it with 10-gauge and a 15-amp fuse and you're set\u003c\/li\u003e\n  \u003cli\u003eBlack cast aluminum housing pulls heat off the LEDs and shrugs off vibration\u003c\/li\u003e\n  \u003cli\u003eSealed Deutsch connector for a weatherproof, corrosion-resistant electrical connection\u003c\/li\u003e\n  \u003cli\u003eStainless steel U-shape bracket and mounting hardware included for a clean surface mount\u003c\/li\u003e\n  \u003cli\u003eClear spot lens installed from the factory for a crisp, uncolored beam\u003c\/li\u003e\n  \u003cli\u003eCompact 5-inch square footprint fits a hardtop, arch, bumper, or roof rack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized RIGID Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is the Phoenix POD?\u003c\/summary\u003e\n    \u003cp\u003eIt puts out 10,104 lumens from a 134-watt LED. The spot lens focuses that into a tight column, so instead of a wide wash you get real reach, enough to pick out something a long way off in the dark.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size wire and fuse should I use?\u003c\/summary\u003e\n    \u003cp\u003eThe light draws 9.6 amps at 14 volts DC, so run at least 10-gauge wire and protect the circuit with a 15-amp fuse. On runs longer than about 15 feet, step up the gauge to avoid voltage drop, and use a relay if you're switching it from the dash.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a spot beam or a flood?\u003c\/summary\u003e\n    \u003cp\u003eIt's a spot beam, and it ships with the clear spot lens already installed. Tight column, long throw, less side spread. If you need to light up a wide area up close, a flood is the better tool.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the Deutsch connector for?\u003c\/summary\u003e\n    \u003cp\u003eIt's a sealed, weatherproof electrical connector that keeps water and corrosion out of the pins. In salt air, add a little dielectric grease to the connection and it'll stay reliable for years.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a mounting bracket?\u003c\/summary\u003e\n    \u003cp\u003eYes. RIGID includes a stainless steel U-shape bracket and the mounting hardware. It's a surface mount, so you can hang it on a hardtop, arch, bumper, or roof rack.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use this on a boat?\u003c\/summary\u003e\n    \u003cp\u003eYou can. The cast aluminum housing, stainless bracket, and sealed Deutsch connector all hold up out on the water. Aim it 5 to 10 degrees down so you're lighting the water and not blinding oncoming boaters.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much power does it draw?\u003c\/summary\u003e\n    \u003cp\u003eAbout 9.6 amps at 14 volts DC, which works out to roughly 134 watts. Size your wiring and fuse for that current and you're good.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the housing get hot?\u003c\/summary\u003e\n    \u003cp\u003eThe cast aluminum body stays relatively cool to the touch because it's pulling heat off the LEDs, but the lens face gets hot in use. Keep it clear of plastic covers, canvas, and dock lines when it's running.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's included in the box?\u003c\/summary\u003e\n    \u003cp\u003eYou get the Phoenix POD light itself, the stainless steel U-shape bracket, the mounting hardware, and the clear spot lens installed on the light.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRIGID Industries Phoenix POD \/1 5-Inch Square Spot LED Light\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRIGID Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e168240\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774037184\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003ePhoenix POD \/1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Size\u003c\/th\u003e\n\u003ctd\u003e5 Inch Square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eSpot Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Output\u003c\/th\u003e\n\u003ctd\u003e10,104 Lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e134 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCurrent Draw\u003c\/th\u003e\n\u003ctd\u003e9.6 Amp at 14 Volt DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Source\u003c\/th\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eClear Spot Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eBlack Cast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSurface Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eDeutsch Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Bracket\u003c\/th\u003e\n\u003ctd\u003eStainless Steel U-Shape Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Hardware\u003c\/th\u003e\n\u003ctd\u003eMounting Hardware and Spot Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is the Phoenix POD?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It puts out 10,104 lumens from a 134-watt LED. The spot lens focuses that into a tight column, so instead of a wide wash you get real reach, enough to pick out something a long way off in the dark.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size wire and fuse should I use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The light draws 9.6 amps at 14 volts DC, so run at least 10-gauge wire and protect the circuit with a 15-amp fuse. On runs longer than about 15 feet, step up the gauge to avoid voltage drop, and use a relay if you're switching it from the dash.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a spot beam or a flood?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a spot beam, and it ships with the clear spot lens already installed. Tight column, long throw, less side spread. If you need to light up a wide area up close, a flood is the better tool.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the Deutsch connector for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a sealed, weatherproof electrical connector that keeps water and corrosion out of the pins. In salt air, add a little dielectric grease to the connection and it'll stay reliable for years.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a mounting bracket?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. RIGID includes a stainless steel U-shape bracket and the mounting hardware. It's a surface mount, so you can hang it on a hardtop, arch, bumper, or roof rack.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this on a boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You can. The cast aluminum housing, stainless bracket, and sealed Deutsch connector all hold up out on the water. Aim it 5 to 10 degrees down so you're lighting the water and not blinding oncoming boaters.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much power does it draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"About 9.6 amps at 14 volts DC, which works out to roughly 134 watts. Size your wiring and fuse for that current and you're good.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the housing get hot?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The cast aluminum body stays relatively cool to the touch because it's pulling heat off the LEDs, but the lens face gets hot in use. Keep it clear of plastic covers, canvas, and dock lines when it's running.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's included in the box?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You get the Phoenix POD light itself, the stainless steel U-shape bracket, the mounting hardware, and the clear spot lens installed on the light.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":44788234584157,"sku":"2007246","price":469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/112892XL.jpg?v=1785004185","url":"https:\/\/nvnmarine.com\/products\/rigid-industries-5-inch-spot-led-10-104-lumens","provider":"NVN Marine","version":"1.0","type":"link"}