{"product_id":"rigid-f-150-grille-30-inch-rds-series-led-bar","title":"Rigid Industries F-150 Grille with 30-Inch RDS-Series LED Light Bar","description":"\u003cp class=\"nvn-hero\"\u003ePull your factory F-150 grille and drop in this Rigid Industries replacement, a black powder-coated stainless mesh grille with a 30-inch RDS-Series curved LED light bar built right into the center. You get the RI Star emblem, real forward lighting, and a clean integrated look, with no bumper cutting or roof racks required.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThis is a full replacement grille for the Ford F-150 with a 30-inch RDS-Series curved LED light bar built right into the center. You pull the factory grille, drop this one in, and you've got an integrated light bar that looks like it came off the assembly line that way. No bumper cutting, no roof rack, no light bar clamped across the windshield. The light sits behind the mesh where it belongs.\u003c\/p\u003e\n\u003cp\u003eThe frame is stainless steel with a black powder-coat finish, cut in a mesh pattern. Stainless holds up to road salt, mud, and weather better than the plastic factory grille it replaces, and the powder coat gives it a deep, even black that matches a blacked-out truck without looking cheap. The RI Star emblem mounts in the grille, so you keep that finished, branded look up front.\u003c\/p\u003e\n\u003cp\u003eThe centerpiece is the 30-inch RDS-Series light bar. RDS is Rigid's curved single-row design, the shape that follows the contour of the grille instead of sitting flat. That curve does two things. It tucks the bar into the bodyline so it doesn't stick out, and it spreads the light across a wider arc than a straight bar of the same length. For anyone who runs dark back roads, job sites, trailheads, or a long gravel driveway, that reach and spread is the whole point.\u003c\/p\u003e\n\u003cp\u003eThe mesh does more than look good. It's a screen in front of the light, so trail debris, kicked-up rocks, and low branches hit the stainless before they ever reach the lens. On a bar mounted out in the open, one thrown rock can crack a lens. Tucked behind this grille, the light gets a layer of protection the factory never gave it. That matters if you actually use the truck the way it's built to be used.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward if you've done any wiring before. The grille itself is a bolt-in swap using the factory mounting points. The light bar is where you'll spend your time. You'll run a wiring harness from the bar back to the battery, through a relay and an inline fuse, then up to a switch inside the cab. We'd point you to Rigid's harness kit rather than wiring the bar straight to the battery. A relay and fuse protect the circuit and let a small dash switch carry the load safely. Route the harness away from hot exhaust and sharp edges, take your time, and you'll have a clean install that lasts.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes. This is an off-road light. Check your local rules before you run it on the street, since a forward-facing bar like this is meant for off-highway use in most places. And confirm the fitment for your exact truck. Part number 41582 is built for a specific F-150 body, so match it to your year and trim before you order. If you're not sure, send us the year and we'll confirm it for you.\u003c\/p\u003e\n\u003cp\u003eWho's it for? Anyone who wants the light bar look without hardware hanging off the truck. Overlanders, hunters, contractors, ranch and farm trucks, anyone who leaves pavement after dark. It's also a smart pick if your factory grille is already cracked or faded and you were going to replace it anyway. Instead of a plain grille, you get the grille plus a serious light in one install, and a front end that looks like it was planned that way from day one.\u003c\/p\u003e\n\u003cp\u003eOne more thing worth saying. Buying the grille and the light together saves you the guesswork of matching a bar to a mount. The bar is sized and positioned for this grille, so the fit and the look are sorted out of the box. You're not test-fitting brackets or drilling holes to make two separate parts play nice. It's one part number, one finished result.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eDirect-fit Ford F-150 replacement grille, bolts in using the factory mounting points for a swap you can do in the driveway\u003c\/li\u003e\n  \u003cli\u003eIntegrated 30-inch RDS-Series curved LED light bar, forward lighting built into the grille instead of hanging off the bumper or roof\u003c\/li\u003e\n  \u003cli\u003eCurved single-row RDS design follows the grille contour, tucking the bar into the bodyline and spreading light across a wider arc than a flat bar\u003c\/li\u003e\n  \u003cli\u003eStainless steel construction, stands up to road salt, mud, and weather far better than the plastic factory grille\u003c\/li\u003e\n  \u003cli\u003eBlack powder-coat finish, deep even color that matches a blacked-out truck and resists chipping\u003c\/li\u003e\n  \u003cli\u003eMesh pattern shields the light lens from thrown rocks, branches, and trail debris\u003c\/li\u003e\n  \u003cli\u003eRI Star grille emblem included, keeps a finished, branded front end\u003c\/li\u003e\n  \u003cli\u003eOne-part upgrade, grille plus light bar in a single install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Rigid Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does this grille fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's a replacement grille for the Ford F-150. Part number 41582 is built for a specific F-150 body and year range, so match it to your truck before ordering. Not sure? Send us your year and trim and we'll confirm the fit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with the light bar?\u003c\/summary\u003e\n    \u003cp\u003eYes. It includes one 30-inch RDS-Series curved LED light bar mounted in the center of the grille. You don't buy the light separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the RI Star emblem included?\u003c\/summary\u003e\n    \u003cp\u003eYes, the RI Star grille emblem is part of the grille, so the front end looks finished right out of the box.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need to cut my bumper or truck to install it?\u003c\/summary\u003e\n    \u003cp\u003eNo. The grille bolts into the factory grille mounting points and the light bar is already integrated, so there's no bumper or roof cutting.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I wire the light bar?\u003c\/summary\u003e\n    \u003cp\u003eRun a wiring harness from the bar to the battery through a relay and an inline fuse, then up to a switch in the cab. We recommend Rigid's harness kit rather than wiring straight to the battery, so the relay and fuse protect the circuit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the grille made of?\u003c\/summary\u003e\n    \u003cp\u003eStainless steel with a black powder-coat finish, cut in a mesh pattern. Stainless handles salt and weather better than the plastic factory grille.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy a curved light bar instead of a straight one?\u003c\/summary\u003e\n    \u003cp\u003eThe RDS-Series curve follows the shape of the grille. It tucks the bar into the bodyline and throws light across a wider arc than a straight bar of the same length.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I run this light bar on the street?\u003c\/summary\u003e\n    \u003cp\u003eA forward-facing bar like this is meant for off-highway use in most areas. Check your local rules before running it on public roads.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the mesh protect the light?\u003c\/summary\u003e\n    \u003cp\u003eYes. The stainless mesh sits in front of the lens, so rocks and branches hit the grille before they reach the light.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRigid Industries Ford F-150 Replacement Grille with 30-Inch RDS-Series LED Light Bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRigid Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e41582\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774009945\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVehicle Fitment\u003c\/th\u003e\n\u003ctd\u003eFord F-150\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrille Style\u003c\/th\u003e\n\u003ctd\u003eReplacement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrille Pattern\u003c\/th\u003e\n\u003ctd\u003eMesh\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePowder Coated Black\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eEmblem\u003c\/th\u003e\n\u003ctd\u003eRI Star Grille Emblem (Included)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Light\u003c\/th\u003e\n\u003ctd\u003eOne 30-Inch RDS-Series LED Light Bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Bar Length\u003c\/th\u003e\n\u003ctd\u003e30 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Bar Series\u003c\/th\u003e\n\u003ctd\u003eRDS-Series (Curved Single-Row)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eKeystone Part Number\u003c\/th\u003e\n\u003ctd\u003eR2G41582\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does this grille fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a replacement grille for the Ford F-150. Part number 41582 is built for a specific F-150 body and year range, so match it to your truck before ordering. Not sure? Send us your year and trim and we'll confirm the fit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with the light bar?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It includes one 30-inch RDS-Series curved LED light bar mounted in the center of the grille. You don't buy the light separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the RI Star emblem included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, the RI Star grille emblem is part of the grille, so the front end looks finished right out of the box.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need to cut my bumper or truck to install it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The grille bolts into the factory grille mounting points and the light bar is already integrated, so there's no bumper or roof cutting.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I wire the light bar?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Run a wiring harness from the bar to the battery through a relay and an inline fuse, then up to a switch in the cab. We recommend Rigid's harness kit rather than wiring straight to the battery, so the relay and fuse protect the circuit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the grille made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Stainless steel with a black powder-coat finish, cut in a mesh pattern. Stainless handles salt and weather better than the plastic factory grille.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why a curved light bar instead of a straight one?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The RDS-Series curve follows the shape of the grille. It tucks the bar into the bodyline and throws light across a wider arc than a straight bar of the same length.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I run this light bar on the street?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A forward-facing bar like this is meant for off-highway use in most areas. Check your local rules before running it on public roads.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the mesh protect the light?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The stainless mesh sits in front of the lens, so rocks and branches hit the grille before they reach the light.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":44786865799261,"sku":"2007000","price":2078.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_7237925f-ac45-45b0-9ef1-8d1aba37908f.jpg?v=1784980175","url":"https:\/\/nvnmarine.com\/products\/rigid-f-150-grille-30-inch-rds-series-led-bar","provider":"NVN Marine","version":"1.0","type":"link"}