{"product_id":"rigid-e-series-10-infrared-led-light-bar-110392","title":"RIGID E-Series 10 Inch Infrared Combo LED Light Bar","description":"\u003cp class=\"nvn-hero\"\u003eThe RIGID E-Series 10 Inch Infrared light bar puts out serious illumination your eyes can't see. Built for running with night vision, it pushes 19,800 raw lumens of infrared light through a combo beam so you light up the water ahead while staying completely dark to the naked eye. Twenty IR LEDs, 46 watts, and a sealed housing built to take spray and vibration.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eHere's the thing about an infrared light bar. Point it at the water and you won't see a thing. That's the whole idea. The RIGID E-Series IR emits infrared light that's invisible to the naked eye, so the only way to see what it lights up is through night vision goggles or an IR-capable camera. Run it on the bow and your night vision setup sees the channel, the crab pots, the debris, and the shoreline lit up bright as day. Anyone watching from shore just sees a dark boat.\u003c\/p\u003e\n\u003cp\u003eThis is the 10 inch model, and it runs 20 infrared LEDs for 19,800 raw lumens. It's a combo beam, which means RIGID mixes spot and flood optics in the same bar. You get distance down the middle to reach out ahead of the boat and spread on the edges to fill in your peripheral vision. For running a channel at night or scanning a shoreline, that combo pattern is exactly what you want. One bar covers both jobs.\u003c\/p\u003e\n\u003cp\u003eWhy go infrared instead of a normal white spotlight? Two reasons. First, a white light kills your night vision the second it comes on, and it kills everyone else's too. Second, it announces exactly where you are. Infrared keeps you dark. Your goggles see everything, your eyes stay adapted to the night, and you're not lighting yourself up for miles. For patrol, security, and any kind of low-profile night running, that's the entire point.\u003c\/p\u003e\n\u003cp\u003eRIGID builds the E-Series to survive real use. The housing is a hard-anodized black bar with a tinted polycarbonate CR-39 lens over the LEDs, and it uses a pressure equalizing vent so temperature swings don't pull moisture past the seals. That CR-39 lens is the same optical-grade material used in quality eyewear. It's tough, it resists yellowing, and the tint keeps the bar looking dark and low-key when it's off. Combined with the sealed housing, the optics stay clear season after season.\u003c\/p\u003e\n\u003cp\u003eThe electrical side is friendly. Draw is 3.28 amps at 46 watts, and it accepts a wide 9 to 36 volt input, so it'll run happily on a 12 volt or 24 volt boat without a converter. The mounting hardware is black anodized to match the housing and hold up against salt. Mounting is surface mount, so you're bolting it down to a hard surface like a bow pulpit, a hard top, or a bracket rather than sliding it into a channel.\u003c\/p\u003e\n\u003cp\u003eWiring is straightforward. Run it to a switched circuit at the helm, ideally its own switch so you can bring it up only when you're on the goggles. At 3.28 amps it's an easy load for most any accessory circuit. We'd put it on a dedicated fused feed with marine-grade wire and a weatherproof switch, same as any deck light. Nothing exotic here, and if you've wired a spreader light before you can wire this. Keep the run short and the wire sized right and you'll never think about it again.\u003c\/p\u003e\n\u003cp\u003eSo who's this for? Anyone running with night vision. Think night navigation in tight water, security and patrol work, night fishing or hunting where you don't want to spook anything, and search operations after dark. It's a premium piece, and it only makes sense if you've already got night vision goggles or an IR camera to pair with it. Without a night vision device, an infrared light does nothing you can see. But if you're already set up for the dark, this is the light that makes the night usable. And it's a genuine RIGID, so you're getting the same build quality that goes into their visible E-Series bars, just tuned for the infrared spectrum.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eInfrared output invisible to the naked eye, visible only through night vision goggles or IR cameras for covert night running\u003c\/li\u003e\n  \u003cli\u003e19,800 raw lumens from 20 infrared LEDs lights up the water for your night vision setup\u003c\/li\u003e\n  \u003cli\u003eCombo beam blends spot and flood optics, distance down the middle and spread on the sides from one bar\u003c\/li\u003e\n  \u003cli\u003e46 watt draw at just 3.28 amps, an easy load for most any accessory circuit\u003c\/li\u003e\n  \u003cli\u003eWide 9 to 36 volt input runs on 12 volt or 24 volt systems with no converter\u003c\/li\u003e\n  \u003cli\u003e10 inch length fits bow pulpits, hard tops, and brackets where space is tight\u003c\/li\u003e\n  \u003cli\u003eTinted polycarbonate CR-39 lens resists yellowing and keeps the bar low-key when off\u003c\/li\u003e\n  \u003cli\u003ePressure equalizing vent balances temperature swings so moisture stays out of the housing\u003c\/li\u003e\n  \u003cli\u003eBlack anodized mounting hardware matches the housing and stands up to salt\u003c\/li\u003e\n  \u003cli\u003eSurface mount design bolts down solid to any hard surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Rigid Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I see the light from this bar with my own eyes?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is an infrared light, and the output is invisible to the naked eye. You need night vision goggles, a monocular, or an IR-capable camera to see what it lights up. That's by design, it lets you illuminate the water while staying completely dark to anyone watching.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat night vision gear do I need to use it?\u003c\/summary\u003e\n    \u003cp\u003eAny IR-sensitive night vision device works, whether that's a Gen 2 or Gen 3 goggle, a monocular, or a digital IR camera. If your setup can see infrared, it'll see everything this bar lights up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much light does it put out?\u003c\/summary\u003e\n    \u003cp\u003eIt runs 20 infrared LEDs for 19,800 raw lumens at 46 watts. That's a lot of infrared illumination for a 10 inch bar, enough to reach well ahead of the boat and light up a shoreline for your night vision.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's a combo beam?\u003c\/summary\u003e\n    \u003cp\u003eCombo means RIGID mixes spot and flood optics in the same bar. The spot optics throw distance down the center, the flood optics spread wide on the edges. You get reach and coverage from one light instead of choosing between them.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work on my 12 volt boat?\u003c\/summary\u003e\n    \u003cp\u003eYes. It accepts a wide 9 to 36 volt input, so it runs on 12 volt or 24 volt systems with no converter or resistor needed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much current does it draw?\u003c\/summary\u003e\n    \u003cp\u003e3.28 amps at 46 watts. That's an easy load for almost any switched accessory circuit. We'd still put it on its own fused feed with marine-grade wire.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount?\u003c\/summary\u003e\n    \u003cp\u003eIt's a surface mount light, so you bolt it down to a hard surface like a bow pulpit, a hard top, or a bracket. The black anodized mounting hardware is included and matches the housing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it sealed against water and weather?\u003c\/summary\u003e\n    \u003cp\u003eYes. The housing is sealed with a pressure equalizing vent that balances temperature swings so moisture doesn't get pulled past the seals. The tinted polycarbonate CR-39 lens is tough and resists yellowing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy run infrared instead of a regular white spotlight?\u003c\/summary\u003e\n    \u003cp\u003eTwo reasons. A white light kills your night vision the instant it comes on and announces exactly where you are. Infrared keeps you dark, preserves your eyes' night adaptation, and stays invisible while your goggles see everything. For patrol, security, and low-profile night running, that's the whole point.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size is this model?\u003c\/summary\u003e\n    \u003cp\u003eThis is the 10 inch length, RIGID part number 110392. It's the compact size in the infrared E-Series lineup, sized for tight mounting spots.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRIGID E-Series 10 Inch Infrared Combo LED Light Bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRigid Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e110392\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774008559\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eE-Series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Output\u003c\/th\u003e\n\u003ctd\u003eInfrared\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eCombo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRaw Lumens\u003c\/th\u003e\n\u003ctd\u003e19,800\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Count\u003c\/th\u003e\n\u003ctd\u003e20 Infrared LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e46 Watts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmp Draw\u003c\/th\u003e\n\u003ctd\u003e3.28 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Rating\u003c\/th\u003e\n\u003ctd\u003e9 to 36 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eTinted Polycarbonate CR-39\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Color\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eSurface Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Hardware\u003c\/th\u003e\n\u003ctd\u003eBlack Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVenting\u003c\/th\u003e\n\u003ctd\u003ePressure Equalizing Vent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I see the light from this bar with my own eyes?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is an infrared light, and the output is invisible to the naked eye. You need night vision goggles, a monocular, or an IR-capable camera to see what it lights up. That's by design, it lets you illuminate the water while staying completely dark to anyone watching.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What night vision gear do I need to use it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Any IR-sensitive night vision device works, whether that's a Gen 2 or Gen 3 goggle, a monocular, or a digital IR camera. If your setup can see infrared, it'll see everything this bar lights up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much light does it put out?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It runs 20 infrared LEDs for 19,800 raw lumens at 46 watts. That's a lot of infrared illumination for a 10 inch bar, enough to reach well ahead of the boat and light up a shoreline for your night vision.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's a combo beam?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Combo means RIGID mixes spot and flood optics in the same bar. The spot optics throw distance down the center, the flood optics spread wide on the edges. You get reach and coverage from one light instead of choosing between them.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work on my 12 volt boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It accepts a wide 9 to 36 volt input, so it runs on 12 volt or 24 volt systems with no converter or resistor needed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much current does it draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"3.28 amps at 46 watts. That's an easy load for almost any switched accessory circuit. We'd still put it on its own fused feed with marine-grade wire.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a surface mount light, so you bolt it down to a hard surface like a bow pulpit, a hard top, or a bracket. The black anodized mounting hardware is included and matches the housing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it sealed against water and weather?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The housing is sealed with a pressure equalizing vent that balances temperature swings so moisture doesn't get pulled past the seals. The tinted polycarbonate CR-39 lens is tough and resists yellowing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why run infrared instead of a regular white spotlight?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Two reasons. A white light kills your night vision the instant it comes on and announces exactly where you are. Infrared keeps you dark, preserves your eyes' night adaptation, and stays invisible while your goggles see everything. For patrol, security, and low-profile night running, that's the whole point.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size is this model?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This is the 10 inch length, RIGID part number 110392. It's the compact size in the infrared E-Series lineup, sized for tight mounting spots.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":44787089899613,"sku":"2007103","price":709.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_bea68968-b6bf-4939-bcdf-8476dbb88e50.jpg?v=1784991442","url":"https:\/\/nvnmarine.com\/products\/rigid-e-series-10-infrared-led-light-bar-110392","provider":"NVN Marine","version":"1.0","type":"link"}