{"product_id":"rigid-46752-a-pillar-mount-2024-ford-ranger","title":"RIGID Industries 46752 A-Pillar Light Mount, 2024+ Ford Ranger","description":"\u003cp class=\"nvn-hero\"\u003eThe RIGID 46752 is a bolt-on A-pillar mount built specifically for the 2024+ Ford Ranger. You get a set of two black powder-coated stainless brackets that put a RIGID 4-inch pod on each side of the windshield, aimed right where you need the light. Hardware's in the box, and it's about an hour of work.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe RIGID 46752 is a purpose-built A-pillar mount for the 2024 and newer Ford Ranger. It's a set of two black brackets that bolt to the base of each A-pillar and put a RIGID 4-inch pod on either side of the windshield. If you've been running your Ranger with lights zip-tied to a bar or crammed into the bumper, this is the clean, factory-matched way to get real light up high and aimed where you're looking.\u003c\/p\u003e\n\u003cp\u003eMounting up on the A-pillars does a few things a bumper light can't. The pods sit above the hood line, so you kill the glare that bounces back off your own sheet metal on a dark trail. You get a wider throw across the trail edges, which is exactly what you want for spotting a washout or an animal stepping out at the last second. And because the brackets are tucked tight against the pillar, you're not adding a big wind-catching bar across the roof or losing your approach angle up front.\u003c\/p\u003e\n\u003cp\u003eThese brackets are cut and bent specifically for the 2024+ Ranger's pillar geometry, so they line up with the vehicle's mounting points instead of forcing you to eyeball it. The kit is a bolt-on job, and RIGID includes the mounting hardware in the box. Most folks have both sides on in about an hour with basic hand tools. Snug everything down, aim your pods, and route your wiring back through the firewall or along the existing harness path.\u003c\/p\u003e\n\u003cp\u003eThe mount is built to take a beating. It's stainless steel under a black powder-coat finish, so it shrugs off the weather, road grime, and the occasional branch swipe without turning into a rust streak down your paint. The finish keeps it looking like it came from the factory, not like an afterthought bolted to the outside of the truck.\u003c\/p\u003e\n\u003cp\u003eLight compatibility is the part people ask about most, so let's be clear. This mount is designed for RIGID's 4-inch pods: the 360 Series, the D-Series, the D-SS, and the Radiance pods. That covers most of the popular RIGID ditch-light setups. Each bracket holds one pod, so the set of two gives you a matched pair, one per side. Pick your beam pattern based on how you drive. Spot pattern reaches way down the trail, flood spreads it wide and close, and a driving or combo pattern splits the difference for mixed use.\u003c\/p\u003e\n\u003cp\u003eOne quick tip before you run your final wiring. A-pillar brackets like these are typically side-specific, so hold each one up to its pillar and confirm the fit before you torque everything down. It's a two-minute check that saves you from pulling a bracket back off after the wire's already run.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Overlanders who want a tidy ditch-light setup without hacking up the truck. Weekend trail guys who are tired of squinting past their headlights. Work-truck owners running gravel roads and job sites before sunrise. Anybody who's added a light bar and realized they still had a dark hole right at the edges of the road. Ditch lights on the A-pillars fill that gap, and they do it without blinding oncoming traffic the way a poorly aimed roof bar can.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes. This is a mount only, so the pods and any wiring harness or switch are sold separately. Get your lights sorted first so you can drop them straight in. And take a minute to aim them right once they're up. A-pillar lights point slightly outboard by design, and a few degrees of adjustment makes the difference between lighting up the trail and lighting up your own hood. Bolt them up, aim them true, and you'll wonder how you drove at night without them.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSet of two black brackets, one RIGID 4-inch pod per side for a matched ditch-light pair\u003c\/li\u003e\n  \u003cli\u003eBolt-on design cut for the 2024+ Ford Ranger A-pillar, lines up with the factory geometry\u003c\/li\u003e\n  \u003cli\u003eStainless steel construction under a black powder-coat finish that resists weather and road grime\u003c\/li\u003e\n  \u003cli\u003eFits RIGID 360 Series, D-Series, D-SS, and Radiance 4-inch pods\u003c\/li\u003e\n  \u003cli\u003eMounting hardware included, about a one-hour install with basic hand tools\u003c\/li\u003e\n  \u003cli\u003ePods mount above the hood line to cut glare and widen your view of the trail edges\u003c\/li\u003e\n  \u003cli\u003eLow-profile pillar mount keeps your approach angle and avoids a wind-catching roof bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized RIGID Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat vehicle does the RIGID 46752 mount fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's built for the 2024 and newer Ford Ranger. The brackets are cut and bent for that truck's A-pillar geometry, so they line up with the vehicle's mounting points.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich RIGID lights work with this mount?\u003c\/summary\u003e\n    \u003cp\u003eIt's designed for RIGID's 4-inch pods: the 360 Series, the D-Series, the D-SS, and the Radiance pods. Each bracket holds one pod.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many lights does the kit hold?\u003c\/summary\u003e\n    \u003cp\u003eIt's a set of two brackets, one pod per side, so you get a matched pair of ditch lights, two total across the truck.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre the lights included?\u003c\/summary\u003e\n    \u003cp\u003eNo, this is a mount only. The pods, wiring harness, and switch are sold separately. Get your lights picked out first so you can drop them straight in.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it a bolt-on install?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's a bolt-on kit and RIGID includes the mounting hardware in the box. Most people have both sides installed in about an hour with basic hand tools.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the mount made of?\u003c\/summary\u003e\n    \u003cp\u003eStainless steel with a black powder-coat finish, so it holds up to weather and road grime without rusting.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it hold up to weather and off-road use?\u003c\/summary\u003e\n    \u003cp\u003eThat's what it's built for. The stainless steel and powder coat shrug off spray, grime, and the occasional branch swipe on the trail.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long does the install take?\u003c\/summary\u003e\n    \u003cp\u003ePlan on about an hour for the pair with basic hand tools. Snug the brackets down, mount your pods, and route the wiring back through the firewall or along the existing harness path.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I mount a light bar on these instead of pods?\u003c\/summary\u003e\n    \u003cp\u003eNo. These brackets are designed for RIGID's 4-inch pods, not a full light bar. Each side takes one pod.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo the brackets go on a specific side?\u003c\/summary\u003e\n    \u003cp\u003eA-pillar brackets like these are typically side-specific, so hold each one up to its pillar and confirm the fit before you torque everything down.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRIGID 46752 A-Pillar Light Mount, 2024+ Ford Ranger\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRIGID Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e46752\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774036460\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVehicle Fitment\u003c\/th\u003e\n\u003ctd\u003e2024+ Ford Ranger\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInstallation Type\u003c\/th\u003e\n\u003ctd\u003eBolt-On\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet Of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Lights\u003c\/th\u003e\n\u003ctd\u003eTwo, one per bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePowder Coated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Lights\u003c\/th\u003e\n\u003ctd\u003eRIGID 4-inch 360 Series, D-Series, D-SS, Radiance Pods\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Hardware\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eEstimated Install Time\u003c\/th\u003e\n\u003ctd\u003e1 hour\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What vehicle does the RIGID 46752 mount fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built for the 2024 and newer Ford Ranger. The brackets are cut and bent for that truck's A-pillar geometry, so they line up with the vehicle's mounting points.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which RIGID lights work with this mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's designed for RIGID's 4-inch pods: the 360 Series, the D-Series, the D-SS, and the Radiance pods. Each bracket holds one pod.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many lights does the kit hold?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a set of two brackets, one pod per side, so you get a matched pair of ditch lights, two total across the truck.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are the lights included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, this is a mount only. The pods, wiring harness, and switch are sold separately. Get your lights picked out first so you can drop them straight in.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it a bolt-on install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's a bolt-on kit and RIGID includes the mounting hardware in the box. Most people have both sides installed in about an hour with basic hand tools.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the mount made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Stainless steel with a black powder-coat finish, so it holds up to weather and road grime without rusting.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it hold up to weather and off-road use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"That's what it's built for. The stainless steel and powder coat shrug off spray, grime, and the occasional branch swipe on the trail.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long does the install take?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Plan on about an hour for the pair with basic hand tools. Snug the brackets down, mount your pods, and route the wiring back through the firewall or along the existing harness path.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I mount a light bar on these instead of pods?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. These brackets are designed for RIGID's 4-inch pods, not a full light bar. Each side takes one pod.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do the brackets go on a specific side?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A-pillar brackets like these are typically side-specific, so hold each one up to its pillar and confirm the fit before you torque everything down.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":45057485701213,"sku":"2008368","price":132.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_66d0736b-49db-43f8-a2f3-e69154ae3ab0.jpg?v=1789486253","url":"https:\/\/nvnmarine.com\/products\/rigid-46752-a-pillar-mount-2024-ford-ranger","provider":"NVN Marine","version":"1.0","type":"link"}