{"product_id":"rigid-46736-a-pillar-light-mount-2021-f-150-raptor","title":"RIGID Industries A-Pillar Light Mount Kit for 2021+ Ford F-150","description":"\u003cp class=\"nvn-hero\"\u003eThe RIGID Industries 46736 is a vehicle-specific A-pillar mount kit for the 2021 and newer Ford F-150 and Raptor. It puts one auxiliary pod light on each side of the windshield, built from black powder-coated stainless steel and shipped as a set of two with the mounting hardware you need.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you just picked up a 2021 or newer Ford F-150 or Raptor and you want real lighting up high without hacking into your truck, the RIGID Industries 46736 A-pillar mount kit is where a clean install starts. It's a vehicle-specific pair of brackets that sits at the base of the windshield A-pillars and holds one auxiliary light on each side, aiming the beam out over the hood and into the trail, the trees, or the job site ahead of you.\u003c\/p\u003e\n\u003cp\u003eHere's the part worth being clear about up front. This is the mount, not the lights. You get a set of two brackets and the hardware to install them, and you add your own RIGID pod lights, one per side. That's how most A-pillar setups work, and it lets you pick the pods that match how you drive, whether that's a wide flood for camp and work or a tighter spot for high-speed desert runs.\u003c\/p\u003e\n\u003cp\u003eThe brackets are built from stainless steel and finished in black powder coat. On a truck that lives outside and gets rained on, salted in winter, and blasted with trail dust, that combination matters. Stainless doesn't rust the way plain steel does, and the black powder coat gives it a factory-clean look that disappears against the truck instead of shouting aftermarket. Mount one light per side and the whole setup reads like it could have rolled off the line that way.\u003c\/p\u003e\n\u003cp\u003eBecause the kit is cut specifically for the 2021 and newer F-150 and Raptor A-pillar, the fit is dialed in for that windshield line. It ships with the mounting hardware you need, and you follow RIGID's included instructions to bolt everything down at the pillar. That vehicle-specific approach is the whole point. A universal clamp can slip, rattle, or leave you drilling in the wrong spot. A mount made for your exact truck goes on straight and stays put.\u003c\/p\u003e\n\u003cp\u003eSo who actually runs A-pillar lights? Overlanders who need to light up a two-track at night. Hunters and ranchers crossing fields long after sunset. Off-road crews who want the trail lit well beyond what the factory headlights reach. Work trucks pulling into dark lots and job sites where a little extra flood makes hooking up a trailer or finding a tool a lot less of a fumble. Anyone who has driven a dark backroad and wished for more light out past the hood knows exactly why these mounts exist.\u003c\/p\u003e\n\u003cp\u003eA quick note on what this isn't. It's not a universal bracket, so it won't fit older F-150 body styles or other trucks. It's not a light bar mount either. Each bracket is made to carry a single pod light, so plan your build around one light per pillar rather than a big bar up top. And again, the pods themselves are a separate purchase, so budget for the lights and the wiring when you order.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic hand tools. The brackets locate at the factory A-pillar area, the included stainless hardware handles the mount, and from there it's a matter of bolting your pods to the brackets and routing the wiring back to a switch and your power source. Take your time with the wiring, use a relay and an inline fuse, and tuck the harness so it isn't rubbing against a moving edge. Done once and done right, this is a mount you set and forget.\u003c\/p\u003e\n\u003cp\u003eRIGID Industries has built its name on off-road LED lighting that holds up to abuse, and their vehicle-specific mounts are cut to the same standard. The 46736 kit lets you add that lighting to a late-model F-150 the right way, with hardware that fits, a finish that lasts, and a clean look that respects the truck you just paid for. Bolt the brackets on, drop in your pods, run the wiring, and you've got serious light on tap the next time the sun goes down.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eVehicle-specific fit for the 2021 and newer Ford F-150 and Raptor A-pillar, so the brackets go on straight and stay put\u003c\/li\u003e\n  \u003cli\u003eStainless steel construction resists the rust that eats plain-steel brackets on a truck that lives outside\u003c\/li\u003e\n  \u003cli\u003eBlack powder-coat finish gives a factory-clean look that blends into the truck instead of shouting aftermarket\u003c\/li\u003e\n  \u003cli\u003eHolds one auxiliary pod light per bracket, aiming light out over the hood and down the trail\u003c\/li\u003e\n  \u003cli\u003eSold as a set of two, one bracket for each A-pillar\u003c\/li\u003e\n  \u003cli\u003eMounting hardware included, so you bolt the kit on with what's in the box\u003c\/li\u003e\n  \u003cli\u003eBuilt by RIGID Industries to the same standard as their off-road LED lighting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized RIGID Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat vehicles does the RIGID 46736 fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's cut specifically for the 2021 and newer Ford F-150, including the Raptor. It's not a universal bracket, so it won't fit older F-150 body styles or other trucks.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre the lights included with this kit?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is the mount only. You get the set of two brackets and the hardware to install them, and you add your own RIGID pod lights separately, one per side.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many lights does it hold?\u003c\/summary\u003e\n    \u003cp\u003eOne light per bracket, so two lights total across both A-pillars. Each bracket is made to carry a single pod light rather than a light bar.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the kit made of?\u003c\/summary\u003e\n    \u003cp\u003eStainless steel with a black powder-coat finish. Stainless resists rust and the powder coat keeps it looking clean on a truck that gets rained on, salted, and covered in trail dust.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with mounting hardware?\u003c\/summary\u003e\n    \u003cp\u003eYes. The kit ships with the mounting hardware you need to bolt the brackets to the A-pillar. Follow RIGID's included instructions for your truck.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill this fit an older F-150?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's designed for the 2021 and newer F-150 and Raptor A-pillar line. Earlier body styles use a different windshield and pillar shape and need a different mount.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I mount a light bar on it?\u003c\/summary\u003e\n    \u003cp\u003eNo. Each bracket is built for a single pod light, so plan your build around one light per pillar rather than a bar across the top.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it sold individually or as a pair?\u003c\/summary\u003e\n    \u003cp\u003eAs a pair. You get a set of two brackets in the box, one for each side of the windshield.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat finish and color is it?\u003c\/summary\u003e\n    \u003cp\u003eBlack powder coat over stainless steel. The black finish gives it a factory-clean look that blends into the truck.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eA-Pillar Light Mount, Black Powder-Coated Stainless, Set of 2, Ford F-150 2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRIGID Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e46736\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774034473\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eA-Pillar Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVehicle Fitment\u003c\/th\u003e\n\u003ctd\u003e2021+ Ford F-150 \/ Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLights Per Bracket\u003c\/th\u003e\n\u003ctd\u003eOne\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 2 (Pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Hardware\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eMount Kit, Lights Sold Separately\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What vehicles does the RIGID 46736 fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's cut specifically for the 2021 and newer Ford F-150, including the Raptor. It's not a universal bracket, so it won't fit older F-150 body styles or other trucks.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are the lights included with this kit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is the mount only. You get the set of two brackets and the hardware to install them, and you add your own RIGID pod lights separately, one per side.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many lights does it hold?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"One light per bracket, so two lights total across both A-pillars. Each bracket is made to carry a single pod light rather than a light bar.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the kit made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Stainless steel with a black powder-coat finish. Stainless resists rust and the powder coat keeps it looking clean on a truck that gets rained on, salted, and covered in trail dust.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with mounting hardware?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The kit ships with the mounting hardware you need to bolt the brackets to the A-pillar. Follow RIGID's included instructions for your truck.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will this fit an older F-150?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's designed for the 2021 and newer F-150 and Raptor A-pillar line. Earlier body styles use a different windshield and pillar shape and need a different mount.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I mount a light bar on it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. Each bracket is built for a single pod light, so plan your build around one light per pillar rather than a bar across the top.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it sold individually or as a pair?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"As a pair. You get a set of two brackets in the box, one for each side of the windshield.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What finish and color is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Black powder coat over stainless steel. The black finish gives it a factory-clean look that blends into the truck.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":45005458341981,"sku":"2007957","price":188.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_92a9eaab-50c4-4ebf-8fa0-be99a5609b5d.jpg?v=1788763774","url":"https:\/\/nvnmarine.com\/products\/rigid-46736-a-pillar-light-mount-2021-f-150-raptor","provider":"NVN Marine","version":"1.0","type":"link"}