{"product_id":"rigid-46612-tundra-bumper-bracket-kit-20in-sr-series","title":"RIGID 46612 Bumper Bracket Kit, 20in SR-Series (22+ Tundra)","description":"\u003cp class=\"nvn-hero\"\u003eThe RIGID Industries 46612 is a stainless steel bumper bracket kit that mounts one 20-inch SR-Series light bar on the front of a 2022 and newer Toyota Tundra. It's cut to fit that truck specifically, comes with all the hardware, and shrugs off road salt and spray. The light bar sells separately.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you've mounted a light bar on a truck before, you know the bracket is where the job succeeds or fails. Rattles, a drooping bar, corroded hardware after one wet season. The RIGID Industries 46612 bumper bracket kit takes all of that off the table on a 2022 and newer Toyota Tundra. It's a vehicle-specific kit, made to fit the front bumper of that truck, so you're not fabricating anything or hoping a universal bracket lines up.\u003c\/p\u003e\n\u003cp\u003eHere's the honest first thing to know. This is the bracket kit, not the light. It mounts one 20-inch SR-Series single-row light bar down low in the front bumper, and the light bar sells separately. So if you already run a RIGID SR-Series 20-inch, this is the piece that gets it bolted to the Tundra cleanly. And if you're building the whole setup from scratch, plan on the bar plus this kit together.\u003c\/p\u003e\n\u003cp\u003eThe brackets are stainless steel, and that matters more than it sounds. A bumper-level light bar sits right in the spray zone, catching road salt, mud, and standing water off the front tires all winter. Mild steel brackets streak and rust fast down there. Stainless holds up, and the silver finish keeps a clean look behind the bumper opening. If you wheel in snow country or run beach and marsh roads, that corrosion resistance is the difference between a mount that still looks right in three years and one you're replacing.\u003c\/p\u003e\n\u003cp\u003eFitment is the whole point of a kit like this. RIGID cut it for the 2022+ Tundra front bumper specifically, so the bracket geometry matches the factory structure and the bar ends up level and centered. You get the mounting brackets and the hardware in the box. Follow the included instructions and it's a straightforward bolt-up with hand tools in an afternoon. No guessing, no shimming a universal bracket until it looks close enough.\u003c\/p\u003e\n\u003cp\u003eWhy go vehicle-specific instead of a universal tab-and-bolt setup? Universal brackets ask you to find your own mounting points, trim to clear the bumper cover, and hope the bar sits straight. That's how you end up with a crooked bar or holes in the wrong spot. A kit made for the 2022+ Tundra takes those decisions out of your hands. The brackets reference the truck's own structure, the bar lands where RIGID intended, and the result looks factory instead of aftermarket-improvised.\u003c\/p\u003e\n\u003cp\u003eWhat's it good for out on the road? A 20-inch bar in the bumper throws light low and wide right where you need it, spotting deer at dusk, picking a line on a dark two-track, or backing a trailer into a black campsite. Bumper mounting keeps the light out of your sightline and off the hood, so you don't get glare bouncing back at the windshield the way a hood or roof bar sometimes does. For a daily-driven Tundra that pulls double duty as a hunting or overland rig, a bumper light bar is one of the most useful upgrades you can bolt on.\u003c\/p\u003e\n\u003cp\u003eOn pairing, this kit is built around the RIGID SR-Series 20-inch light bar. Run a spot beam if you want maximum reach down the road, a flood if you want a wide wash of light up close, or a combo that does both. Whichever SR-Series 20-inch you choose, this bracket puts it in the bumper where it belongs.\u003c\/p\u003e\n\u003cp\u003eA couple of practical notes from doing these installs. Run your wiring with a proper harness and a relay, and seal the entry point where the leads pass through so you don't get water intrusion over time. Snug the hardware to spec, and a little threadlocker on the bolts is cheap insurance against vibration backing them out over thousands of miles of washboard.\u003c\/p\u003e\n\u003cp\u003eOne last thing on fit. This kit mounts one light bar, not two, and it's built around the 20-inch SR-Series size. It won't fit a different length bar or a different vehicle, so double-check you're running a 20-inch SR-Series and driving a 2022-or-newer Tundra before you order. The kit weighs about 3.3 pounds and is backed by a 2-year warranty. Made in the USA. It's the simple, right-fit way to get a RIGID bar mounted low and clean on a late-model Tundra.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eStainless steel construction resists rust and corrosion from road salt, mud, and spray\u003c\/li\u003e\n  \u003cli\u003eVehicle-specific fit for the 2022 and newer Toyota Tundra front bumper\u003c\/li\u003e\n  \u003cli\u003eMounts one 20-inch SR-Series single-row light bar\u003c\/li\u003e\n  \u003cli\u003eIncludes all mounting brackets and hardware needed for the install\u003c\/li\u003e\n  \u003cli\u003eSilver stainless finish keeps a clean look behind the bumper opening\u003c\/li\u003e\n  \u003cli\u003eLightweight 3.3 lb kit bolts up with hand tools\u003c\/li\u003e\n  \u003cli\u003eBacked by a 2-year warranty and made in the USA\u003c\/li\u003e\n  \u003cli\u003eLight bar sold separately so you pick your own SR-Series beam pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized RIGID Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill this bracket kit fit my Toyota Tundra?\u003c\/summary\u003e\n    \u003cp\u003eIt's designed specifically for the 2022 and newer Toyota Tundra front bumper. It won't fit earlier Tundras or other trucks, so confirm your model year before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the light bar included?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is the bracket kit only. It includes the mounting brackets and hardware to mount one 20-inch SR-Series light bar, and the light bar sells separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size light bar does it fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's built for a 20-inch SR-Series single-row light bar. It mounts one bar, not two, and isn't designed for other lengths or series.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's it made of?\u003c\/summary\u003e\n    \u003cp\u003eStainless steel, in a silver finish. Down at bumper level the mount catches road salt, mud, and spray, and stainless holds up to that far better than mild steel.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with the hardware I need?\u003c\/summary\u003e\n    \u003cp\u003eYes. The kit includes the mounting brackets and the hardware to bolt the bar to the Tundra's front bumper. Follow the included instructions for the exact steps.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a bolt-on install?\u003c\/summary\u003e\n    \u003cp\u003eIt's a vehicle-specific kit cut for the 2022+ Tundra, so the brackets reference the truck's own structure and the bar ends up level and centered. Most owners get it mounted with hand tools in an afternoon.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhere does the light bar end up?\u003c\/summary\u003e\n    \u003cp\u003eLow in the front bumper. That keeps the light out of your sightline and off the hood, so you get a wide, low throw down the road without glare bouncing back at the windshield.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs there a warranty?\u003c\/summary\u003e\n    \u003cp\u003eYes, RIGID Industries backs the kit with a 2-year warranty. It's also made in the USA.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRIGID Industries 46612 Bumper Bracket Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRIGID Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e46612\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774035630\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVehicle Fitment\u003c\/th\u003e\n\u003ctd\u003e2022+ Toyota Tundra\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Location\u003c\/th\u003e\n\u003ctd\u003eFront Bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits Light Bar\u003c\/th\u003e\n\u003ctd\u003e20 Inch SR-Series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eNumber of Light Bars\u003c\/th\u003e\n\u003ctd\u003eMounts One\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Bar Included\u003c\/th\u003e\n\u003ctd\u003eNo, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded in Kit\u003c\/th\u003e\n\u003ctd\u003eMounting Brackets and Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2-Year\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will this bracket kit fit my Toyota Tundra?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's designed specifically for the 2022 and newer Toyota Tundra front bumper. It won't fit earlier Tundras or other trucks, so confirm your model year before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the light bar included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is the bracket kit only. It includes the mounting brackets and hardware to mount one 20-inch SR-Series light bar, and the light bar sells separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size light bar does it fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built for a 20-inch SR-Series single-row light bar. It mounts one bar, not two, and isn't designed for other lengths or series.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's it made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Stainless steel, in a silver finish. Down at bumper level the mount catches road salt, mud, and spray, and stainless holds up to that far better than mild steel.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with the hardware I need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The kit includes the mounting brackets and the hardware to bolt the bar to the Tundra's front bumper. Follow the included instructions for the exact steps.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a bolt-on install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a vehicle-specific kit cut for the 2022+ Tundra, so the brackets reference the truck's own structure and the bar ends up level and centered. Most owners get it mounted with hand tools in an afternoon.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Where does the light bar end up?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Low in the front bumper. That keeps the light out of your sightline and off the hood, so you get a wide, low throw down the road without glare bouncing back at the windshield.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is there a warranty?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, RIGID Industries backs the kit with a 2-year warranty. It's also made in the USA.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":45057334771805,"sku":"2008334","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_e370ac00-a0e5-47f7-80c0-b73e1c06620d.jpg?v=1789473401","url":"https:\/\/nvnmarine.com\/products\/rigid-46612-tundra-bumper-bracket-kit-20in-sr-series","provider":"NVN Marine","version":"1.0","type":"link"}