{"product_id":"rigid-360-series-laser-6-amber-spot-light-set-36212","title":"RIGID Industries 360-Series Laser 6\" Amber Spot Light Set (Pair)","description":"\u003cp class=\"nvn-hero\"\u003eRIGID Industries 360-Series Laser 6-inch amber spot lights, sold as a matched set of two. Laser-enhanced LEDs push 4189 raw lumens down a tight, long-throw spot beam, while the amber lens cuts glare in fog, dust, rain, and snow. Runs 9 to 36 volts, mounts to the surface, and ships with brackets and hardware.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe RIGID Industries 360-Series Laser 6-inch amber spot lights ship as a matched set of two, built for anyone who needs to see farther down a dark road, trail, or job site than the factory headlights allow. This is auxiliary lighting done right. Each light runs a 78-watt laser-enhanced LED array that throws 4189 raw lumens down a tight spot beam, and the amber lens changes the game the moment the weather turns.\u003c\/p\u003e\n\u003cp\u003eHere's what the \"Laser\" in 360-Series Laser actually means. RIGID pairs its LED array with laser-forward optics to stretch the projection distance well past what a standard LED spot can manage. So instead of a bright puddle of light a couple hundred feet out, you get a focused column that reaches deep into the dark. On open highway, a forestry road, or an ag field at 4 a.m., that reach is the difference between reacting in time and reacting too late.\u003c\/p\u003e\n\u003cp\u003eThe amber lens isn't a styling choice. Amber light cuts through fog, dust, rain, and blowing snow with far less backscatter than white light. If you've ever run white driving lights into a wall of fog and had it bounce right back at you, you know the problem. Amber sidesteps it. Dust off the rig ahead, a snow squall, a dust-choked haul road, that's where these lights earn their keep. And the built-in amber backlight ring gives you a low glow when the mains are switched off, so the lights read as intentional even when they're not lit up.\u003c\/p\u003e\n\u003cp\u003eElectrically, these are easy to live with. The input range is 9 to 36 volts, which means they run on a 12-volt truck or a 24-volt rig without any converter or step-down. Each light pulls about 5.6 amps at 12 volts, so plan on wiring the pair through a relay and a properly fused circuit sized for the combined load. Don't tap them straight off a switch. Run a relay, fuse the feed, and use a wire gauge that matches the run length so voltage drop doesn't dim the output on a long pull to the front bumper.\u003c\/p\u003e\n\u003cp\u003eThe housing is black aluminum alloy, and it does two jobs. It sheds the heat a 78-watt LED generates so the light holds its output, and it stands up to the vibration and weather that come with front-of-vehicle mounting. These are surface-mount lights, and the set includes the mounting brackets and hardware, so you're not hunting for a bracket kit before you can bolt them up. Most installs take an afternoon, less if you've already run a switch and relay.\u003c\/p\u003e\n\u003cp\u003eThe spot beam pattern is worth understanding before you buy. Spot means a tight, long-throw pattern with a hot center. It's built for distance, not for lighting up the ditches beside you. If you want wide, close-in coverage for slow work or backing into a site, a flood or diffused pattern does that better, and plenty of folks run a spot pair like this for reach and a separate wide pattern for the near field. As a distance light, though, a 6-inch 360-Series Laser spot is hard to beat.\u003c\/p\u003e\n\u003cp\u003eThe 360-Series is RIGID's round-light family, and it's engineered to hold up where cheaper lights quit. The optimized beam optics, the sealed aluminum body, and the attention to heat management are the reason these lights keep projecting clean light season after season instead of fogging over or fading. When you're buying a pair at this level, you're paying for output that stays consistent and a build that doesn't rattle apart. That's the whole point.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone adding serious forward lighting to a truck, UTV, overland rig, work vehicle, or any 9-to-36-volt platform that spends time moving fast in poor conditions. First-timers get a complete kit with brackets and hardware in the box. Experienced installers get a light that wires up clean and holds its output. It's a set of two, so you can run both to one switch for a simple on-off, or split them to independent switches if you want the amber pair on demand as fog or scene lighting. Model 36212, and it's the amber-lens spot version of RIGID's 360-Series Laser line.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e78-watt laser-enhanced LED array pushes 4189 raw lumens down a tight spot beam for long-distance reach.\u003c\/li\u003e\n  \u003cli\u003eAmber lens cuts glare and backscatter in fog, dust, rain, and snow so you can actually see the road ahead.\u003c\/li\u003e\n  \u003cli\u003e9 to 36 volt input runs on both 12V and 24V electrical systems without a converter.\u003c\/li\u003e\n  \u003cli\u003e5.6 amp draw per light at 12 volts keeps the load manageable on a properly fused, relay-switched circuit.\u003c\/li\u003e\n  \u003cli\u003eAmber backlight ring adds a low-profile accent glow when the mains are switched off.\u003c\/li\u003e\n  \u003cli\u003eBlack aluminum alloy housing sheds heat and stands up to vibration and weather.\u003c\/li\u003e\n  \u003cli\u003eSurface-mount design with included brackets and hardware bolts up in an afternoon.\u003c\/li\u003e\n  \u003cli\u003eSold as a matched set of two, ready to wire to a single switch or split for selective use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized RIGID Industries reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's included in the set?\u003c\/summary\u003e\n    \u003cp\u003eTwo 6-inch 360-Series Laser amber spot lights, plus the mounting brackets and hardware you need to install them. It's a complete pair right out of the box.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage does it run on?\u003c\/summary\u003e\n    \u003cp\u003eThe input range is 9 to 36 volts, so it works on both 12-volt and 24-volt electrical systems with no converter or step-down needed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much current does each light draw?\u003c\/summary\u003e\n    \u003cp\u003eAbout 5.6 amps at 12 volts per light. Wire the pair through a relay on a properly fused circuit sized for the combined load rather than tapping them straight off a switch.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the beam pattern?\u003c\/summary\u003e\n    \u003cp\u003eSpot. It's a tight, long-throw pattern with a hot center, built for distance down the road or trail rather than wide, close-in coverage.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy an amber lens instead of white?\u003c\/summary\u003e\n    \u003cp\u003eAmber light cuts through fog, dust, rain, and blowing snow with far less backscatter than white light, so it doesn't bounce back at you in bad conditions.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is each light?\u003c\/summary\u003e\n    \u003cp\u003eEach light is rated at 4189 raw lumens and draws 78 watts, running a laser-enhanced LED array for extended projection distance.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the housing made of?\u003c\/summary\u003e\n    \u003cp\u003eBlack aluminum alloy. It sheds the heat the LED array generates and holds up to the vibration and weather of front-of-vehicle mounting. The lights are surface mount.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the 'Laser' in 360-Series Laser mean?\u003c\/summary\u003e\n    \u003cp\u003eRIGID pairs the LED array with laser-forward optics to stretch the projection distance well past a standard LED spot, giving you more usable reach at a distance.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I wire the two lights separately?\u003c\/summary\u003e\n    \u003cp\u003eYes. Run both to a single switch for simple on-off control, or split them to independent switches if you want the amber pair available on demand for fog or scene lighting.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eRIGID Industries 360-Series Laser 6 Inch Amber Spot Light, Set of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRIGID Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e36212\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e849774035784\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003e360-Series Laser\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Size\u003c\/th\u003e\n\u003ctd\u003e6 Inch Round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e78 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCurrent Draw\u003c\/th\u003e\n\u003ctd\u003e5.6 Amp at 12 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Range\u003c\/th\u003e\n\u003ctd\u003e9 to 36 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eSpot\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRaw Lumens\u003c\/th\u003e\n\u003ctd\u003e4189 Lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens Color\u003c\/th\u003e\n\u003ctd\u003eAmber\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBacklight\u003c\/th\u003e\n\u003ctd\u003eAmber\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eBlack Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Style\u003c\/th\u003e\n\u003ctd\u003eSurface Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Type\u003c\/th\u003e\n\u003ctd\u003eDriving \/ Fog Light\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eMounting Brackets and Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's included in the set?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Two 6-inch 360-Series Laser amber spot lights, plus the mounting brackets and hardware you need to install them. It's a complete pair right out of the box.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage does it run on?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The input range is 9 to 36 volts, so it works on both 12-volt and 24-volt electrical systems with no converter or step-down needed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much current does each light draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"About 5.6 amps at 12 volts per light. Wire the pair through a relay on a properly fused circuit sized for the combined load rather than tapping them straight off a switch.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the beam pattern?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Spot. It's a tight, long-throw pattern with a hot center, built for distance down the road or trail rather than wide, close-in coverage.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why an amber lens instead of white?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Amber light cuts through fog, dust, rain, and blowing snow with far less backscatter than white light, so it doesn't bounce back at you in bad conditions.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is each light?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Each light is rated at 4189 raw lumens and draws 78 watts, running a laser-enhanced LED array for extended projection distance.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the housing made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Black aluminum alloy. It sheds the heat the LED array generates and holds up to the vibration and weather of front-of-vehicle mounting. The lights are surface mount.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the 'Laser' in 360-Series Laser mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"RIGID pairs the LED array with laser-forward optics to stretch the projection distance well past a standard LED spot, giving you more usable reach at a distance.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I wire the two lights separately?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Run both to a single switch for simple on-off control, or split them to independent switches if you want the amber pair available on demand for fog or scene lighting.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":44786904072285,"sku":"2007024","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_51a22784-3242-4efb-a228-7a513c4284e2.jpg?v=1784983057","url":"https:\/\/nvnmarine.com\/products\/rigid-360-series-laser-6-amber-spot-light-set-36212","provider":"NVN Marine","version":"1.0","type":"link"}