{"product_id":"platinum-pontoon-bench-arm-right-hand-taylor-made","title":"Taylor Made Platinum Series Pontoon Bench Arm, Right Hand, Champagne","description":"\u003cp class=\"nvn-hero\"\u003eThe Taylor Made Platinum Series right-hand bench arm is the piece that finishes a pontoon seating rebuild. It drops into the right side of a Platinum Series bench, adds a molded cup holder, and wears a warm Champagne finish. Marine-grade poly frame, marine vinyl, and stainless hardware mean it's built to stay out in the weather.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you're refreshing the seating on a Platinum Series pontoon, this is the right-hand arm that finishes the job. It's built by Taylor Made to drop into the right side of a Platinum Series bench section, and it comes with a molded cup holder right where your hand naturally falls. The color is Champagne, so it blends with the warm, light-toned interiors that pontoon builders have leaned into for the last several years.\u003c\/p\u003e\n\u003cp\u003eEverything about this arm is made to live outdoors. The frame is rotationally-molded marine grade polyethylene, which means it's one solid piece with no seams to split and no wood core to rot. The cushion is marine grade vinyl over mildew resistant polyurethane foam, so a rain shower or a wet swimsuit won't start a mold problem underneath. Even the small stuff is thought through. Stainless steel staples and mounting fasteners hold everything together, and the seams are sewn with UV-resistant polyester thread that won't chalk out and let go after a couple of seasons in the sun.\u003c\/p\u003e\n\u003cp\u003eThe arm measures 8.5 inches deep by 25 inches wide by 28 inches tall overall. That 28-inch height is worth a note. It sits a touch taller than some older bench arms, so if you're running 20 to 22 foot tubes with lower rail lines, take a quick measurement before you order to make sure the top of the arm clears your rail the way you want. On most Platinum Series layouts it drops right in, but a two-minute check with a tape saves a return.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward if you take your time. The mounting feet are molded into the polyethylene base, and they'll hold for years as long as you don't over-torque them on the way in. Snug is the goal, not gorilla-tight. Cracks at the feet almost always come from someone leaning on an impact driver. If you're replacing an existing arm, check that the new bolt pattern lines up with your deck holes before you commit, since even a half-inch of drift means new pilot holes. And because this is the right-hand piece, make sure the cup holder and the arm profile are oriented the way you expect for the right side of the bench before you drive the first screw.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anybody rebuilding, upgrading, or repairing a Platinum Series pontoon and wanting the seating to match. Maybe a previous arm got sun-baked and cracked, or you bought a used boat with one arm missing. Rather than reupholster the whole bench, you swap the single arm and you're back in business. It pairs cleanly with the matching Platinum Series armrests and cup holders, so the whole seating group looks like it left the factory that way instead of a patchwork of mismatched parts.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes. Champagne is a beautiful, warm tone, but light colors show dirt faster than dark ones, especially on a boat that sees a lot of fishing or dog paws. Plan on wiping it down more often than you would a charcoal seat. And while the vinyl and foam are built to resist mildew and UV, nothing on a boat lives forever in direct sun. If you can throw a cover over the boat when it's parked, you'll get more good-looking years out of the material. Treat it right and this arm will outlast a lot of the rest of the boat.\u003c\/p\u003e\n\u003cp\u003eBottom line, it's a purpose-built replacement part that respects the way the original was made. Marine-grade materials top to bottom, stainless hardware, a handy cup holder, and a color that works with modern pontoon interiors. If you're not sure it's the exact match for your bench, send us the model of your boat or your old part number and we'll help you confirm the fit before you buy.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eRight-hand arm designed for the right side of Taylor Made Platinum Series pontoon bench sections\u003c\/li\u003e\n  \u003cli\u003eMolded cup holder built into the arm, right where your hand rests\u003c\/li\u003e\n  \u003cli\u003eRotationally-molded marine grade polyethylene frame, one solid piece with no wood core to rot\u003c\/li\u003e\n  \u003cli\u003eMarine grade vinyl upholstery over mildew resistant polyurethane foam\u003c\/li\u003e\n  \u003cli\u003eStainless steel staples and mounting fasteners resist salt-water corrosion\u003c\/li\u003e\n  \u003cli\u003eUV-resistant polyester thread keeps seams from chalking and failing in the sun\u003c\/li\u003e\n  \u003cli\u003eOverall dimensions 8.5 in deep x 25 in wide x 28 in tall\u003c\/li\u003e\n  \u003cli\u003eChampagne color to match warm-toned modern pontoon interiors\u003c\/li\u003e\n  \u003cli\u003eMounting feet molded into the base for a direct bolt-down install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Taylor Made reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich side of the bench does this arm fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's the right-hand arm, made for the right side of a Platinum Series pontoon bench section. If you need the other side, look for the matching left-hand piece.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a cup holder?\u003c\/summary\u003e\n    \u003cp\u003eYes. A cup holder is molded right into the arm, so there's nothing extra to buy or mount.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it?\u003c\/summary\u003e\n    \u003cp\u003eChampagne, a warm light tone that matches the interiors most Platinum Series pontoons are built with.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the overall dimensions?\u003c\/summary\u003e\n    \u003cp\u003e8.5 inches deep, 25 inches wide, and 28 inches tall. Measure your rail clearance before ordering if you're on shorter 20 to 22 foot tubes, since the 28-inch height sits a little taller than some older arms.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's it made of?\u003c\/summary\u003e\n    \u003cp\u003eThe frame is rotationally-molded marine grade polyethylene, the cover is marine grade vinyl over mildew resistant polyurethane foam, and the hardware is stainless steel. The threads are UV-resistant polyester.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it hold up to sun and rain?\u003c\/summary\u003e\n    \u003cp\u003eThe materials are chosen to resist mildew and UV, and there's no wood core to rot. Light colors still show dirt and any material fades eventually in direct sun, so a cover when the boat is parked helps it last.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a replacement part or a new-build part?\u003c\/summary\u003e\n    \u003cp\u003eBoth. Boaters use it to replace a cracked or missing arm, and builders and refitters use it to complete a Platinum Series seating group.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it install?\u003c\/summary\u003e\n    \u003cp\u003eThe mounting feet are molded into the base and bolt down to the deck. Line the bolt pattern up with your holes, snug the fasteners without over-torquing, and confirm the right-hand orientation before you drive the first screw.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it match the rest of the Platinum Series furniture?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's designed to pair with the matching Platinum Series armrests and cup holders so the seating looks factory, not pieced together.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eTaylor Made Platinum Series Pontoon Bench Arm, Right Hand, Champagne\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTaylor Made\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e6787251\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e848150052698\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall Dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e8.5 in x 25 in x 28 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eChampagne\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Side\u003c\/th\u003e\n\u003ctd\u003eRight Hand\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFrame Material\u003c\/th\u003e\n\u003ctd\u003eRotationally-Molded Marine Grade Polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUpholstery\u003c\/th\u003e\n\u003ctd\u003eMarine Grade Vinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFoam\u003c\/th\u003e\n\u003ctd\u003eMildew Resistant Polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFasteners\u003c\/th\u003e\n\u003ctd\u003eStainless Steel Staples and Mounting Fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003ctd\u003ePolyester UV-Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCup Holder\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003ePlatinum Series Pontoon Bench Sections\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which side of the bench does this arm fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the right-hand arm, made for the right side of a Platinum Series pontoon bench section. If you need the other side, look for the matching left-hand piece.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a cup holder?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. A cup holder is molded right into the arm, so there's nothing extra to buy or mount.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Champagne, a warm light tone that matches the interiors most Platinum Series pontoons are built with.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the overall dimensions?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"8.5 inches deep, 25 inches wide, and 28 inches tall. Measure your rail clearance before ordering if you're on shorter 20 to 22 foot tubes, since the 28-inch height sits a little taller than some older arms.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's it made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The frame is rotationally-molded marine grade polyethylene, the cover is marine grade vinyl over mildew resistant polyurethane foam, and the hardware is stainless steel. The threads are UV-resistant polyester.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it hold up to sun and rain?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The materials are chosen to resist mildew and UV, and there's no wood core to rot. Light colors still show dirt and any material fades eventually in direct sun, so a cover when the boat is parked helps it last.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a replacement part or a new-build part?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Both. Boaters use it to replace a cracked or missing arm, and builders and refitters use it to complete a Platinum Series seating group.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The mounting feet are molded into the base and bolt down to the deck. Line the bolt pattern up with your holes, snug the fasteners without over-torquing, and confirm the right-hand orientation before you drive the first screw.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it match the rest of the Platinum Series furniture?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's designed to pair with the matching Platinum Series armrests and cup holders so the seating looks factory, not pieced together.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Taylor Made","offers":[{"title":"Default Title","offer_id":45056641663069,"sku":"2008282","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_7f606fda-1e73-477b-ba18-cade291c1b58.jpg?v=1789458185","url":"https:\/\/nvnmarine.com\/products\/platinum-pontoon-bench-arm-right-hand-taylor-made","provider":"NVN Marine","version":"1.0","type":"link"}