Pacer 3/16 in Heat Shrink Tubing, 3:1 Black, 3-Pack
Pacer 3/16 in Heat Shrink Tubing, 3:1 Black, 3-Pack — Product description
Pacer Group heat shrink tubing built for battery cable assemblies. Black, 3/16 inch diameter, 3 inches long, three to a pack. The 3:1 shrink ratio pulls down tight over lugs and cable ends for a clean, snug termination, and it's rated from -55 degrees F to 110 degrees F.
When you're building battery cable assemblies, the termination is only as good as what seals it. This Pacer Group heat shrink tubing gives you a clean, snug finish on battery lugs and cable ends. It's 3/16 inch diameter, 3 inches long, black, and it comes three pieces to a pack.
The 3:1 shrink ratio is the part that matters here. That ratio lets the tubing clamp down over a connector and the cable behind it, taking up the step from the wider lug barrel to the smaller gauge wire. So you get a tight, strapped-down fit in one pass instead of doubling up tubing. It's rated for an operating range of -55 degrees F to 110 degrees F, which covers cold mornings and warm engine compartments.
Cut a piece, slide it over your crimp, hit it with a heat gun, and watch it pull in tight. Simple. We keep these on the bench for battery and ground cable work all the time.
Key Features
- 3:1 shrink ratio pulls down over the step from lug barrel to cable for a snug fit in one pass
- 3/16 inch diameter, 3 inch length pieces sized for battery cable terminations
- Black finish blends in on battery and ground cable runs
- Rated -55 degrees F to 110 degrees F for cold starts and warm engine bays
- Pack of 3, ready to cut and shrink with a standard heat gun
Why Buy from NVN Marine
- Authorized Pacer Group reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Pacer Group 3/16 in Heat Shrink Tubing, 3:1 Ratio, Black, Pack of 3 |
|---|---|
| Brand | Pacer Group |
| Manufacturer Part Number | BEHS3/16-3BK-3 |
| UPC | 840248214674 |
| Diameter | 3/16 inch |
| Length | 3 inch |
| Color | Black |
| Operating Temperature | -55 degrees F to 110 degrees F |
| Shrink Ratio | 3:1 |
| Application | Battery Cable Assemblies |
| Pack Quantity | Pack of 3 |
Frequently asked questions
What is this heat shrink made for?
Pacer built it for battery cable assemblies. The 3/16 inch diameter and 3:1 shrink ratio suit battery lugs and cable-end terminations.
How many pieces come in a pack?
Three. Each piece is 3 inches long.
What's the shrink ratio?
It's 3:1, so the tubing shrinks to about a third of its original diameter. That lets it grip over a connector and the smaller wire behind it.
What temperature range does it handle?
It's rated from -55 degrees F to 110 degrees F.
What color is it?
Black.
