{"product_id":"norcold-61436322-thermocouple-for-1082-400-series","title":"Norcold 61436322 Thermocouple for 1082 and 400 Series Fridges","description":"\u003cp class=\"nvn-hero\"\u003eThe Norcold 61436322 is the flame-sensing thermocouple that keeps your 1082 or 400 Series refrigerator running safely on propane. When the burner lights, this probe tells the gas valve the flame is present. If the flame goes out, it shuts the gas down. A worn one is the usual reason a Norcold quits on gas but still cools on electric.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf your Norcold refrigerator has quit cooling on propane but still runs fine on electric, this little part is usually the culprit. The 61436322 is the thermocouple, sometimes called the probe sensor, for Norcold 1082 and 400 Series absorption refrigerators. It's a safety component first and foremost. It sits in the burner flame, and its whole job is to prove that flame is actually burning before the fridge keeps feeding gas to it.\u003c\/p\u003e\n\u003cp\u003eHere's how it works. An absorption fridge doesn't have a compressor. In gas mode it heats an ammonia boiler with a small propane flame, and that heat drives the cooling cycle. The thermocouple tip sits right in that flame. When it heats up, it generates a tiny electrical signal that holds the gas valve open. Cut the flame and the tip cools within seconds, the signal drops, and the valve snaps shut. That's what stops raw propane from pouring into your rig if the burner ever blows out. No working thermocouple, no gas flow. It's a simple, proven safety loop, and Norcold builds this one to the same spec as the sensor your fridge left the factory with.\u003c\/p\u003e\n\u003cp\u003eWhen a thermocouple goes weak, the symptoms are pretty consistent. The fridge lights on gas, runs for a few seconds or a few minutes, then drops out and throws a no-flame or check fault. Sometimes it won't light at all. Meanwhile the same unit cools perfectly on 120-volt electric, because the electric side doesn't touch this circuit. If that's what you're seeing, you're almost certainly looking at a tired thermocouple, a dirty burner, or a weak flame. Swapping in a fresh 61436322 is the cheapest and most common fix, and it's usually the first thing an RV tech reaches for.\u003c\/p\u003e\n\u003cp\u003eWhile you've got the burner area apart, take two minutes to clean it up. Blow the dust and any bug nests out of the burner tube and flue, and wipe the thermocouple contacts clean before you seat the new one. A lot of gas-mode problems on these fridges come down to a partially blocked burner or a poor connection, not the sensor itself. A little dielectric grease on the contact keeps corrosion from creeping in, which matters if your coach sits through a damp off-season.\u003c\/p\u003e\n\u003cp\u003eThis one is a direct replacement for the 1082 and the 400 Series. It uses the OEM-sized connection, so the threaded fitting at the gas valve and the probe geometry match what came out. On the 1082 it's typically a straight swap. On some 400 Series layouts you may need to route the lead a little differently to reach the valve, so check your existing run before you cut anything loose. Always confirm the model number on your fridge's data plate against the fitment before ordering, because Norcold has used different sensors across its later cabinets.\u003c\/p\u003e\n\u003cp\u003eInstallation is well within reach for a handy owner, but respect the fact that you're working around an LP gas line. Shut the propane off at the bottle and let the system bleed down first. The old thermocouple threads into the gas valve or safety valve body and its tip clips into the burner bracket so it sits in the flame path. Getting that tip positioned correctly matters. Too far out of the flame and the new sensor reads cold and cycles you right back to a fault. Snug the fitting firmly but don't overdo it, since the connection is soft brass and strips easily. When you're done, light it, watch it hold for a few minutes, and check for the steady blue flame you want.\u003c\/p\u003e\n\u003cp\u003eBecause this is a safety part, it's not the place to gamble on a no-name substitute or to bypass anything. A flame-failure device that doesn't shut the gas off defeats the entire point. The genuine Norcold 61436322 gives you the correct signal output and the correct fit, so the valve behaves the way the factory intended. If your fridge has been dropping off gas, get the right sensor in there and get back to cold food on the road.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eGenuine Norcold part 61436322, the OEM flame-sensing thermocouple for gas-mode operation\u003c\/li\u003e\n  \u003cli\u003eFits Norcold 1082 and 400 Series absorption refrigerators for a direct replacement\u003c\/li\u003e\n  \u003cli\u003eOEM-sized connection matches the factory threaded fitting and probe geometry\u003c\/li\u003e\n  \u003cli\u003eFlame-detection safety design shuts off the propane valve the instant the burner goes out\u003c\/li\u003e\n  \u003cli\u003eOnly affects gas mode, so electric cooling keeps working while you diagnose\u003c\/li\u003e\n  \u003cli\u003eCommon first fix when a Norcold lights on propane then drops to a no-flame fault\u003c\/li\u003e\n  \u003cli\u003eSoft-brass fitting threads into the gas or safety valve body for a standard service swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Norcold reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the Norcold 61436322 thermocouple do?\u003c\/summary\u003e\n    \u003cp\u003eIt's the flame-sensing safety probe for gas mode. Its tip sits in the burner flame and generates a small signal that holds the propane valve open. If the flame goes out, the signal drops and the valve shuts, so gas can't keep flowing to a burner that isn't lit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich refrigerators does it fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's a direct replacement for Norcold 1082 and 400 Series absorption refrigerators. Always check the model number on your fridge's data plate against the fitment before ordering, since Norcold has used different sensors across other cabinets.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eMy fridge cools on electric but not on propane. Is this the part I need?\u003c\/summary\u003e\n    \u003cp\u003eVery likely. When a Norcold lights on gas then drops to a no-flame fault, or won't light at all, but still cools fine on 120-volt electric, a weak thermocouple is the most common cause. A dirty burner or weak flame can look the same, so clean the burner while you're in there.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs a thermocouple the same as a thermistor?\u003c\/summary\u003e\n    \u003cp\u003eNo. This thermocouple senses the burner flame and controls the gas safety valve. A thermistor is a separate temperature sensor that tells the control board how cold the cabinet is. If your fridge runs but won't hold the right temperature, that's a thermistor question, not this part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a genuine Norcold part?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's the Norcold 61436322, built to the same spec as the sensor your fridge left the factory with, including the OEM-sized connection.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I install it myself?\u003c\/summary\u003e\n    \u003cp\u003eIt's within reach for a handy owner, but you're working around an LP gas line, so shut the propane off at the bottle and let the system bleed down first. The thermocouple threads into the gas valve and its tip clips into the burner bracket so it sits in the flame path.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat connection size does it use?\u003c\/summary\u003e\n    \u003cp\u003eIt uses the OEM-sized connection, so the threaded fitting and probe geometry match the factory sensor. Snug the soft-brass fitting firmly but don't overtighten it, since it can strip.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy does the thermocouple shut the gas off?\u003c\/summary\u003e\n    \u003cp\u003eIt's a flame-failure safety loop. The hot tip has to keep generating a signal to hold the valve open. The moment the flame dies, the tip cools, the signal fades, and the valve closes so raw propane can't pour into your rig.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need to replace it on a schedule?\u003c\/summary\u003e\n    \u003cp\u003eThere's no fixed interval. Replace it when it goes weak and the fridge won't stay lit on gas. When you do, clean the burner tube and flue and wipe the contacts, since a blocked burner or dirty connection often mimics a failing sensor.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eNorcold 61436322 Thermocouple, 1082\/400 Series Refrigerators\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eNorcold\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e61436322\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e610848007231\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePart Type\u003c\/th\u003e\n\u003ctd\u003eThermocouple (Probe Sensor)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eFlame Detection Safety Sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Refrigerators\u003c\/th\u003e\n\u003ctd\u003eNorcold 1082 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAlso Fits\u003c\/th\u003e\n\u003ctd\u003eNorcold 400 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnection Size\u003c\/th\u003e\n\u003ctd\u003eOEM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDirect Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Mode\u003c\/th\u003e\n\u003ctd\u003ePropane \/ Gas\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the Norcold 61436322 thermocouple do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the flame-sensing safety probe for gas mode. Its tip sits in the burner flame and generates a small signal that holds the propane valve open. If the flame goes out, the signal drops and the valve shuts, so gas can't keep flowing to a burner that isn't lit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which refrigerators does it fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a direct replacement for Norcold 1082 and 400 Series absorption refrigerators. Always check the model number on your fridge's data plate against the fitment before ordering, since Norcold has used different sensors across other cabinets.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"My fridge cools on electric but not on propane. Is this the part I need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Very likely. When a Norcold lights on gas then drops to a no-flame fault, or won't light at all, but still cools fine on 120-volt electric, a weak thermocouple is the most common cause. A dirty burner or weak flame can look the same, so clean the burner while you're in there.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is a thermocouple the same as a thermistor?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This thermocouple senses the burner flame and controls the gas safety valve. A thermistor is a separate temperature sensor that tells the control board how cold the cabinet is. If your fridge runs but won't hold the right temperature, that's a thermistor question, not this part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a genuine Norcold part?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's the Norcold 61436322, built to the same spec as the sensor your fridge left the factory with, including the OEM-sized connection.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I install it myself?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's within reach for a handy owner, but you're working around an LP gas line, so shut the propane off at the bottle and let the system bleed down first. The thermocouple threads into the gas valve and its tip clips into the burner bracket so it sits in the flame path.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What connection size does it use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It uses the OEM-sized connection, so the threaded fitting and probe geometry match the factory sensor. Snug the soft-brass fitting firmly but don't overtighten it, since it can strip.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why does the thermocouple shut the gas off?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a flame-failure safety loop. The hot tip has to keep generating a signal to hold the valve open. The moment the flame dies, the tip cools, the signal fades, and the valve closes so raw propane can't pour into your rig.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need to replace it on a schedule?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"There's no fixed interval. Replace it when it goes weak and the fridge won't stay lit on gas. When you do, clean the burner tube and flue and wipe the contacts, since a blocked burner or dirty connection often mimics a failing sensor.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Norcold","offers":[{"title":"Default Title","offer_id":68069075288157,"sku":"2008951","price":57.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_975bc4a2-bbd9-41d3-b5b7-895376ef5fb6.jpg?v=1795117122","url":"https:\/\/nvnmarine.com\/products\/norcold-61436322-thermocouple-for-1082-400-series","provider":"NVN Marine","version":"1.0","type":"link"}