{"product_id":"noco-hm485-dual-8d-battery-box-commercial-grade","title":"NOCO HM485 Commercial Dual Group 8D Battery Box","description":"\u003cp class=\"nvn-hero\"\u003eThe NOCO HM485 is a commercial grade battery box that holds two Group 8D batteries and keeps them locked down and ventilated. Molded from thick black polyethylene, it resists acid, fuel, and saltwater, takes cable up to 4\/0 AWG, and stays impact tough down to -20 degrees Fahrenheit. Heavy-duty containment for a serious battery bank.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe NOCO HM485 is a commercial grade battery box built to hold a pair of big Group 8D batteries and keep them locked down, ventilated, and protected. If you're running a large house bank on a trawler, a bow thruster battery, or the starting bank on a diesel, this is the box that keeps those heavy batteries where they belong. It's molded from thick black polyethylene, so it shrugs off battery acid, fuel, and saltwater without rusting or corroding.\u003c\/p\u003e\n\u003cp\u003eLet's be clear about what dual 8D means. An 8D is one of the largest lead-acid batteries you can put on a boat, and this box swallows two of them. That's a serious amount of amp-hours, and a serious amount of weight. So the box is sized and built accordingly. Thick walls, a captive lid that won't wander off in the bilge, and two fastening knobs that pull the lid down tight over both batteries.\u003c\/p\u003e\n\u003cp\u003eThe full-flow ventilation matters more than people think. Flooded lead-acid batteries give off hydrogen when they charge, and that gas has to go somewhere. The vented design lets it escape instead of building up inside a sealed box. If you're running a bank of flooded 8D batteries in an engine room or a lazarette, you want that airflow. One note from the field: if you convert to lithium down the road, the venting story changes, so plan your enclosure around the chemistry you're actually running.\u003c\/p\u003e\n\u003cp\u003eCable management on a box this size is a real consideration. The HM485 has large cable entry holes that take heavy gauge wire, up to 4\/0 AWG, which is what you'll be running off a bank this big. That's the good news. The one thing we'd tell you from experience is to protect those cables where they pass through the plastic. Deburr any sharp edges, or run a grommet or split loom through the openings, so a heavy cable under load doesn't chafe through its insulation over a couple of seasons.\u003c\/p\u003e\n\u003cp\u003eImpact resistance is rated down to -20 degrees Fahrenheit, so the box stays tough in the cold instead of turning brittle. That's good news for anyone who lays the boat up over a hard winter or runs in northern water. Just keep it away from direct engine heat. Poly holds up to cold impact beautifully, but sustained heat right off an exhaust manifold or turbo can soften and warp any plastic box over time. Mount it where it gets some air.\u003c\/p\u003e\n\u003cp\u003eSpeaking of mounting, treat those two fastening knobs as lid retention, not as the boat's tie-down. On a center console or a trawler sitting in protected water, the knobs and captive lid do their job fine. But two 8D batteries are heavy, and if you're on a sailboat that heels hard or a boat that pounds offshore, add a proper strap or bracket to hold the whole box to the sole or a shelf. The lid keeps the batteries in the box. Your strapping keeps the box on the boat. Both jobs matter.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anybody running a large 8D house or start bank who wants those batteries contained, ventilated, and protected from a dropped tool or a sliding cooler. Sportfishers, trawlers, larger cruisers, commercial vessels, big RVs, and work trucks all use boxes like this. Who's it not for? If you're running Group 24, 27, 29, or 31 batteries, this box is too big. A battery that rattles around in an oversized box is worse than no box at all, so match the box to the battery you actually have.\u003c\/p\u003e\n\u003cp\u003eBottom line, the HM485 is a straightforward, heavy-duty piece of gear that does one job well. It holds two 8D batteries safely. There are no electronics to fail and nothing to wear out but the knobs. And if those knobs ever loosen up from vibration, a dab of thread locker or a pair of lock nuts sorts it out. Buy it once, mount it right, and forget about it.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eHolds two Group 8D batteries in one commercial grade enclosure\u003c\/li\u003e\n  \u003cli\u003eMolded black polyethylene resists battery acid, fuel, and saltwater without corroding\u003c\/li\u003e\n  \u003cli\u003eFull-flow ventilation lets hydrogen gas escape from charging flooded batteries\u003c\/li\u003e\n  \u003cli\u003eLarge cable entry holes accept heavy gauge wire up to 4\/0 AWG\u003c\/li\u003e\n  \u003cli\u003eCaptive lid stays with the box so it won't get lost in the bilge\u003c\/li\u003e\n  \u003cli\u003eTwo fastening knobs pull the lid down tight over both batteries\u003c\/li\u003e\n  \u003cli\u003eImpact resistant down to -20 degrees Fahrenheit for cold-weather toughness\u003c\/li\u003e\n  \u003cli\u003eThick-wall construction protects batteries from dropped tools and shifting gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized NOCO reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many batteries does the HM485 hold?\u003c\/summary\u003e\n    \u003cp\u003eIt holds two Group 8D batteries side by side. The 8D is one of the largest lead-acid batteries you'll find on a boat, so this is a big box built for a serious bank.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size cable can I run through it?\u003c\/summary\u003e\n    \u003cp\u003eThe cable entry holes are large and accept heavy gauge wire up to 4\/0 AWG, which is what you'll typically run off a dual 8D bank. Protect the cables with a grommet or split loom where they pass through the plastic to prevent chafe.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it have ventilation?\u003c\/summary\u003e\n    \u003cp\u003eYes. It uses full-flow ventilation so the hydrogen gas that flooded lead-acid batteries give off during charging can escape instead of building up inside the box.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the box made of?\u003c\/summary\u003e\n    \u003cp\u003eBlack polyethylene plastic. It resists battery acid, fuel, and saltwater and won't rust or corrode like a metal enclosure would.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does the lid stay closed?\u003c\/summary\u003e\n    \u003cp\u003eIt has a captive lid held down by two fastening knobs. The lid stays attached to the box, so it won't get lost in the bilge when you open it up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan it handle cold weather?\u003c\/summary\u003e\n    \u003cp\u003eYes. The box is impact resistant down to -20 degrees Fahrenheit, so it stays tough in the cold rather than turning brittle. Just keep it away from direct engine heat, since sustained high heat can warp any plastic box.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it fit Group 27 or Group 31 batteries?\u003c\/summary\u003e\n    \u003cp\u003eNo. The HM485 is sized for two Group 8D batteries and would be far too large for smaller groups like 24, 27, 29, or 31. A battery that rattles around in an oversized box is worse than no box, so match the box to your battery.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I still need to strap the box down?\u003c\/summary\u003e\n    \u003cp\u003eYes. The knobs and captive lid hold the batteries in the box, but they don't secure the box to the boat. Two 8D batteries are heavy, so add a proper strap or bracket to hold the whole box in place, especially on a sailboat or a boat that runs offshore.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use this box for a lithium bank?\u003c\/summary\u003e\n    \u003cp\u003eThe box will physically hold the batteries, but its full-flow venting is designed around flooded lead-acid chemistry. If you're converting to lithium, plan your enclosure and any venting or protection around the chemistry you're actually running.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this only for boats?\u003c\/summary\u003e\n    \u003cp\u003eNo. The same commercial grade box is used in marine, RV, and commercial applications, including work trucks and larger rigs that carry big 8D battery banks.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eNOCO HM485 Commercial Dual Group 8D Battery Box\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eNOCO\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eHM485\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e046221090949\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBattery Fitment\u003c\/th\u003e\n\u003ctd\u003eDual Group 8D\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolyethylene Plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVentilation\u003c\/th\u003e\n\u003ctd\u003eFull Flow\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFastening\u003c\/th\u003e\n\u003ctd\u003eTwo Fastening Knobs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLid\u003c\/th\u003e\n\u003ctd\u003eCaptive Lid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCable Entry\u003c\/th\u003e\n\u003ctd\u003eLarge Cable Entry Holes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCable Capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 4\/0 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eImpact Resistance\u003c\/th\u003e\n\u003ctd\u003eTo -20 Degrees Fahrenheit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrade\u003c\/th\u003e\n\u003ctd\u003eCommercial Grade\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many batteries does the HM485 hold?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It holds two Group 8D batteries side by side. The 8D is one of the largest lead-acid batteries you'll find on a boat, so this is a big box built for a serious bank.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size cable can I run through it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The cable entry holes are large and accept heavy gauge wire up to 4\/0 AWG, which is what you'll typically run off a dual 8D bank. Protect the cables with a grommet or split loom where they pass through the plastic to prevent chafe.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it have ventilation?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It uses full-flow ventilation so the hydrogen gas that flooded lead-acid batteries give off during charging can escape instead of building up inside the box.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the box made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Black polyethylene plastic. It resists battery acid, fuel, and saltwater and won't rust or corrode like a metal enclosure would.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does the lid stay closed?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It has a captive lid held down by two fastening knobs. The lid stays attached to the box, so it won't get lost in the bilge when you open it up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can it handle cold weather?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The box is impact resistant down to -20 degrees Fahrenheit, so it stays tough in the cold rather than turning brittle. Just keep it away from direct engine heat, since sustained high heat can warp any plastic box.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it fit Group 27 or Group 31 batteries?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The HM485 is sized for two Group 8D batteries and would be far too large for smaller groups like 24, 27, 29, or 31. A battery that rattles around in an oversized box is worse than no box, so match the box to your battery.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I still need to strap the box down?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The knobs and captive lid hold the batteries in the box, but they don't secure the box to the boat. Two 8D batteries are heavy, so add a proper strap or bracket to hold the whole box in place, especially on a sailboat or a boat that runs offshore.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this box for a lithium bank?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The box will physically hold the batteries, but its full-flow venting is designed around flooded lead-acid chemistry. If you're converting to lithium, plan your enclosure and any venting or protection around the chemistry you're actually running.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this only for boats?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The same commercial grade box is used in marine, RV, and commercial applications, including work trucks and larger rigs that carry big 8D battery banks.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"NOCO","offers":[{"title":"Default Title","offer_id":68068407640157,"sku":"2007925","price":171.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_5434c4be-5ef6-42b2-b5a4-801b595e792b.jpg?v=1795111589","url":"https:\/\/nvnmarine.com\/products\/noco-hm485-dual-8d-battery-box-commercial-grade","provider":"NVN Marine","version":"1.0","type":"link"}