{"product_id":"moeller-honda-outboard-fuel-line-034386-10lpa","title":"Moeller Honda Outboard Fuel Line | 034386-10LPA","description":"\u003cp class=\"nvn-hero\"\u003eMoeller's Honda fuel line assembly is a complete, ready-to-run replacement for outboards built in 1991 and later. You get 80 inches of 3\/8-inch B1-15 hose with the tank fitting, engine fitting, and primer bulb already installed. Pull the old cracked line, connect this one, prime, and you're fueling clean.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eWhen the fuel line on a Honda outboard starts weeping at the fittings or the primer bulb goes soft and won't hold pressure, you don't want to piece together a fix from generic parts. This Moeller assembly is the whole run, built to fit Honda outboards from 1991 forward, and it shows up ready to connect.\u003c\/p\u003e\n\u003cp\u003eThe hose itself is 80 inches of 3\/8-inch inside diameter B1-15 line. That B1-15 rating matters more than it sounds. It's a low-permeation marine fuel hose that meets the EPA requirements Honda's newer engines were built around, so you're not stepping backward to an older hose that sweats fuel vapor into your bilge. The 80-inch length gives you enough reach for most transom-to-tank runs without coiling up a pile of excess.\u003c\/p\u003e\n\u003cp\u003eBoth ends come fitted. There's a tank connector on one side and the Honda engine fitting on the other, plus the primer bulb already spliced into the line. So this isn't a bare hose you have to build out. Unbox it, route it, click the connectors home, and squeeze the bulb until it firms up. That's the job.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone running a portable tank on a Honda outboard who's dealing with a cracked, sun-baked, or ethanol-swollen fuel line. If your bulb has gone hard and slow to prime, or you smell fuel around the connectors, that's your sign. Replacing the whole assembly is faster and more reliable than chasing a leak fitting by fitting, and you know every joint in the line is fresh when you're done.\u003c\/p\u003e\n\u003cp\u003eOne honest note: this is built for the Honda connection pattern. If you're running a different brand of outboard, the engine-side fitting won't match, and you'll want the assembly made for your engine. Not sure which one you've got? Send us the model and we'll point you to the right line.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e80-inch length of 3\/8-inch inside diameter B1-15 marine fuel hose for full transom-to-tank reach\u003c\/li\u003e\n  \u003cli\u003eEPA-compliant low-permeation line matched to Honda outboards built in 1991 and later\u003c\/li\u003e\n  \u003cli\u003eTank fitting and Honda engine fitting pre-installed on both ends\u003c\/li\u003e\n  \u003cli\u003ePrimer bulb spliced into the line, ready to prime straight out of the box\u003c\/li\u003e\n  \u003cli\u003eComplete assembly, so there's no piecing together generic hose and connectors\u003c\/li\u003e\n  \u003cli\u003eGenuine Moeller build for marine fuel service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Moeller reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich engines does this fuel line fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's built for Honda outboards made in 1991 and later, using Honda's engine-side connection pattern. If you're on a different brand, the engine fitting won't match.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the hose length and diameter?\u003c\/summary\u003e\n    \u003cp\u003eThe hose is 80 inches long with a 3\/8-inch inside diameter, which covers most transom-to-tank runs with a portable tank.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the primer bulb included?\u003c\/summary\u003e\n    \u003cp\u003eYes. The primer bulb is already spliced into the line, along with the tank fitting and the Honda engine fitting. It's a complete assembly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the B1-15 rating mean?\u003c\/summary\u003e\n    \u003cp\u003eB1-15 is a low-permeation marine fuel hose spec. It meets the EPA requirements Honda's newer outboards were designed around, so it keeps fuel vapor from sweating out into your bilge.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come assembled or do I have to build it?\u003c\/summary\u003e\n    \u003cp\u003eIt's fully assembled. Both fittings and the primer bulb are installed, so you just route it, connect both ends, and prime.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I know it's time to replace my old line?\u003c\/summary\u003e\n    \u003cp\u003eLook for cracks, a sun-baked or swollen hose, a primer bulb that's gone hard and slow to prime, or the smell of fuel around the connectors. Any of those means it's time.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eMoeller Honda Outboard EPA Fuel Line Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMoeller\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e034386-10LPA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e739729013113\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHose Length\u003c\/th\u003e\n\u003ctd\u003e80 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInside Diameter\u003c\/th\u003e\n\u003ctd\u003e3\/8 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHose Type\u003c\/th\u003e\n\u003ctd\u003eB1-15\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eHonda outboard engines, 1991 and newer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFuel Line Type\u003c\/th\u003e\n\u003ctd\u003eEPA low-permeation fuel line assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTank Fitting\u003c\/th\u003e\n\u003ctd\u003eIncluded, pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eEngine Fitting\u003c\/th\u003e\n\u003ctd\u003eHonda, pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePrimer Bulb\u003c\/th\u003e\n\u003ctd\u003eIncluded, spliced into line\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which engines does this fuel line fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built for Honda outboards made in 1991 and later, using Honda's engine-side connection pattern. If you're on a different brand, the engine fitting won't match.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the hose length and diameter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The hose is 80 inches long with a 3\/8-inch inside diameter, which covers most transom-to-tank runs with a portable tank.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the primer bulb included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The primer bulb is already spliced into the line, along with the tank fitting and the Honda engine fitting. It's a complete assembly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the B1-15 rating mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"B1-15 is a low-permeation marine fuel hose spec. It meets the EPA requirements Honda's newer outboards were designed around, so it keeps fuel vapor from sweating out into your bilge.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come assembled or do I have to build it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's fully assembled. Both fittings and the primer bulb are installed, so you just route it, connect both ends, and prime.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I know it's time to replace my old line?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Look for cracks, a sun-baked or swollen hose, a primer bulb that's gone hard and slow to prime, or the smell of fuel around the connectors. Any of those means it's time.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Moeller","offers":[{"title":"Default Title","offer_id":45066712252509,"sku":"2008900","price":64.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_404d518b-8f25-4110-b1e6-9444b4d3a86a.jpg?v=1789648722","url":"https:\/\/nvnmarine.com\/products\/moeller-honda-outboard-fuel-line-034386-10lpa","provider":"NVN Marine","version":"1.0","type":"link"}