Moeller 5/8 In 90-Degree Thru-Hull Vent, Brass
Moeller 5/8 In 90-Degree Thru-Hull Vent, Brass — Product description
The Moeller Thru-Hull Vent is a 5/8-inch, 90-degree chrome-plated brass fitting built for marine use. It mounts through the hull to let your tank breathe, and the elbow angle keeps the vent line tucked neatly down and out of the way.
Every tank needs to breathe. As fluid moves in and out, air has to go somewhere, and that's the whole job of this Moeller thru-hull vent. It's a 5/8-inch fitting with a 90-degree elbow, machined from chrome-plated brass so it stands up to salt, spray, and years on the water.
The right-angle elbow is the part people appreciate most. It turns the vent line down and away from the deck opening, so water sheds off instead of running back into the hose. That's a small detail that matters when you're taking spray over the bow.
Installation is straightforward. It threads through the hull at the vent location, and the 5/8-inch barb accepts standard marine vent hose. If you're replacing a corroded or cracked vent, this is a direct, no-drama swap.
It's a simple part, but it's one you don't want to cheap out on. Chrome-plated brass holds up where plated steel rusts through. Rig it up once and forget about it.
Key Features
- 5/8-inch vent size accepts standard marine vent hose for a direct fit
- 90-degree elbow routes the vent line down and away, shedding water off the deck opening
- Chrome-plated brass construction resists corrosion from salt and spray
- Thru-hull design mounts cleanly at the hull vent location
- Direct replacement for a cracked or corroded factory vent
Why Buy from NVN Marine
- Authorized Moeller reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Thru-Hull Vent; 5/8 Inch; 90 Degree Elbow; For Marine Applications |
|---|---|
| Brand | Moeller |
| Manufacturer Part Number | 033201-10 |
| UPC | 739729332016 |
| Vent Size | 5/8 Inch |
| Elbow Angle | 90 Degree |
| Material | Chrome-Plated Brass |
| Application | Marine Thru-Hull |
Frequently asked questions
What size hose does this vent fit?
It's a 5/8-inch fitting, so it accepts standard 5/8-inch marine vent hose.
What is it made of?
Chrome-plated brass, which holds up to salt and spray far better than plated steel.
Why the 90-degree elbow?
The right-angle turns the vent line down and away from the opening, so water sheds off instead of draining back into the hose.
Can I use this to replace an old vent?
Yes. It's a direct thru-hull fitting that swaps in for a cracked or corroded vent at the same location.
