Moeller 1 Inch Twist Turn Brass Drain Plug
Moeller 1 Inch Twist Turn Brass Drain Plug — Product description
The Moeller Twist Turn Seal plug seals your boat's 1 inch transom drain with a simple turn of the handle. Brass body, rubber compression seal, no tools needed. A dependable replacement for the drain plug that always seems to go missing right before launch.
Every boat with a transom drain needs a plug that seals clean and still comes out easy at the ramp. The Moeller Twist Turn Seal plug does both. You set it into a 1 inch drain hole, give the handle a turn, and the rubber seal squeezes outward against the walls of the hole until it's watertight. No threads to cross, no wrench to hunt for in the bottom of the boat.
The body is brass, so it won't rust out on you the way a cheap pot-metal plug will after a season in salt water. The rubber seal does the actual sealing, and the brass gives you a solid mechanism to work it season after season. When you're ready to drain the bilge, a half turn backs the seal off and the plug lifts right out.
It's sized for a 1 inch drain, so measure your hole before you order. And do yourself a favor, keep a spare in the glovebox. You'll thank yourself the day the old one walks off.
Key Features
- 1 inch diameter fits standard 1 inch transom and bilge drain holes
- Twist turn handle expands the rubber seal for a watertight fit with no tools
- Brass body resists corrosion in both fresh and salt water
- Rubber compression seal grips the drain wall instead of relying on threads
- Backs out with a half turn to drain the bilge fast at the ramp
Why Buy from NVN Marine
- Authorized Moeller reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Moeller Twist Turn Seal Rubber Drain Plug, 1 Inch Diameter, Brass |
|---|---|
| Brand | Moeller |
| Manufacturer Part Number | 053061-10 |
| UPC | 739729016473 |
| Plug Diameter | 1 Inch |
| Material | Brass with rubber seal |
| Type | Twist turn seal drain plug |
Frequently asked questions
What size drain does this plug fit?
It's built for a 1 inch diameter drain hole. Measure your transom or bilge drain before ordering, because a plug that's even slightly off won't seal properly.
How does the twist turn plug seal?
You set it in the hole and turn the handle. That compresses the rubber seal so it expands against the walls of the drain and blocks the water. There are no threads involved.
Is this plug corrosion resistant?
Yes. The body is brass, which holds up well in both fresh and salt water, so it won't rust apart the way a cheaper plug can after a season on the water.
Do I need tools to install it?
No tools at all. You install and remove it by hand with a simple turn of the handle.
