Minn Kota X10 10in MFD CMSI+ VX Fish Finder with Transducer
Minn Kota X10 10in MFD CMSI+ VX Fish Finder with Transducer — Product description
The Minn Kota X10 CMSI+ VX is a 10-inch GPS fish finder with Dual Spectrum CHIRP, MEGA Down Imaging+, and MEGA Side Imaging+. It ships with a transom mount transducer and Minn Kota Maps, and it's built to work with your Minn Kota trolling motor and Talon anchors.
If you fish out of a bass boat, a bay boat, or a center console with a trolling motor on the bow, the X10 is the screen that ties the whole rig together. It's a 10-inch Minn Kota X Series fish finder with a 1280 x 800 color TFT display, built-in GPS, and a transom mount transducer already in the box. You mount it at the helm, wire it to 12V power, and you're looking at sonar and charts on the first trip.
The sonar side is where this one earns its keep. The included XM 14 HW CMSI T transducer gives you Dual Spectrum CHIRP for the 2D view, plus MEGA Down Imaging+ and MEGA Side Imaging+. Down imaging reaches 400 feet at 455 kHz and 200 feet in MEGA. Side imaging covers 800 feet side to side at 455 kHz and 400 feet in MEGA. The standard transducer reads depth to 600 feet, and an optional higher-power CHIRP transducer stretches that to 3,500 feet. That's plenty of reach for a lake, an inshore flat, or a day of offshore bottom fishing.
The screen matters when the sun is high and you're wearing polarized lenses. This display is engineered for polarized eyewear, so you can read it in glare and rain. It responds to touch even when it's wet, and if your hands are cold or full of fish, the keypad is right there. You can use either one. Cross Touch means you pick, not us.
Here's the part trolling motor guys love. The X10 is built to work with the rest of the Minn Kota system. Draw and Navigate lets you sketch a course on the screen with your finger, and a compatible motor follows it. Intelligent Depth Control watches for shallow water, warns you, and can engage Spot-Lock and deploy compatible Talon shallow water anchors if it has to. Wireless connectivity handles much of the setup between your gear, so you aren't pulling cable through every hatch on the boat. Not every motor supports every feature, so check your motor's model before you count on them.
Mapping is covered too. Minn Kota Maps come with the unit, and AutoChart Live lets you build your own depth contours, bottom hardness, and vegetation maps as you drive. You get eight hours of built-in recording time, and you can extend that with AutoChart Zero Line SD cards. There are two Micro SD slots, so you can run a chart card in one and keep the other free for recording or updates. Waypoint storage is generous at 10,000 waypoints, 50 routes, and 50 tracks holding up to 20,000 points.
Networking is where this unit has room to grow. You get NMEA 2000, Ethernet, Bluetooth, and Wi-Fi on board. Ethernet lets you link multiple fish finders or add Live Sonar later, and the unit is compatible with radar and a 5-port Ethernet switch. Live Sonar is sold separately, so budget for it if that's your plan. AIS is optional, and autopilot compatibility is built in. Software updates download over Wi-Fi and push to your networked gear, which beats walking an SD card from unit to unit in the driveway.
Power draw is a modest 2.2 amps on 10.8 to 20 VDC input, so it won't tax a typical trolling motor battery bank or a starting battery. It measures 12.098 inches wide by 7.253 inches tall by 3.625 inches deep without the gimbal, and 7.702 inches tall by 4.103 inches deep with the gimbal bracket on. The gimbal bracket comes in the box for surface mounting. One heads up on in-dash installs. The built-in GPS receiver is internal, but the manufacturer notes that an external GPS antenna is required if you flush mount it in the dash, and that antenna is sold separately.
What's in the box? The X10 CMSI+ display, a power adapter, a gimbal bracket, and the transom mount transducer. That's what you need to start. Minn Kota backs it with a 2 year limited warranty, extended to 3 years when you register the product. We're an authorized dealer, so the warranty is the full manufacturer warranty, and our crew can help you figure out the rest of the install.
Key Features
- 10-inch color TFT display at 1280 x 800, engineered for polarized eyewear so it stays readable in glare and rain.
- Touchscreen plus keypad control, so wet hands, gloves, or rough water never leave you stuck.
- Dual Spectrum CHIRP with MEGA Down Imaging+ and MEGA Side Imaging+ for a clear look at fish and structure.
- Included XM 14 HW CMSI T transom mount transducer, so you can run sonar right out of the box.
- Built-in internal GPS with chartplotting and Minn Kota Maps, plus AutoChart Live with 8 hours of built-in recording.
- Draw and Navigate and Intelligent Depth Control work with compatible Minn Kota motors and Talon shallow water anchors.
- NMEA 2000, Ethernet, Bluetooth, and Wi-Fi networking, with Wi-Fi software updates that push to your networked gear.
- Dual Micro SD card slots for chart cards and recording, with room for 10,000 waypoints.
- Only 2.2 amps of power draw on 10.8 to 20 VDC, easy on your battery bank.
Why Buy from NVN Marine
- Authorized Minn Kota reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Minn Kota X10 10in MFD CMSI+ VX |
|---|---|
| Brand | Minn Kota |
| Manufacturer Part Number | 412380-1VX |
| UPC | 82324061868 |
| Display Size | 10 in diagonal |
| Display Type | Color TFT |
| Display Pixel Matrix | 1280H x 800V |
| Touchscreen | Yes |
| Included Transducer | XM-14-HW-CMSI-T |
| Sonar | Dual Spectrum CHIRP, MEGA Down Imaging+, MEGA Side Imaging+ |
| Sonar Coverage | 20°, 42°, 60° & (2) 86° @ -10dB |
| Supported Frequencies | 50/83/200/455/800 kHz, HW DSC CHIRP, and MEGA |
| Depth (Standard Transducer) | 600 ft |
| Depth (Optional CHIRP Transducer) | 3,500 ft |
| Down Imaging Depth | 400 ft (455 kHz), 200 ft (MEGA) |
| Side Imaging Range (Side-To-Side) | 800 ft (455 kHz), 400 ft (MEGA) |
| GPS Receiver | Internal |
| Memory Card Slot | Dual Micro SD |
| Waypoints, Routes, Tracks/Points | 10,000, 50, 50/20,000 |
| Power Draw | 2.2 Amps |
| Power Input | 10.8-20 VDC |
| Power Output RMS | 1000 Watts |
| Power Output Peak-To-Peak | 8000 Watts |
| NMEA 2000 | Included |
| Radar Compatibility | Yes |
| 5-Port Ethernet Switch Compatibility | Yes |
| Autopilot Compatibility | Yes |
| AIS Compatibility | Optional |
| Talon Shallow Water Anchor Compatibility | Yes |
| Dimensions with Gimbal | 12.098" W x 7.702" H x 4.103" D |
| Dimensions without Gimbal | 12.098" W x 7.253" H x 3.625" D |
| Warranty | 2 year limited, 3 year with product registration |
Frequently asked questions
What comes in the box with the Minn Kota X10 CMSI+ VX?
The box includes the X10 CMSI+ display, a power adapter, a gimbal bracket, and the transom mount transducer. Live Sonar, an external GPS antenna for in-dash mounting, and optional higher-power transducers are all sold separately.
Does the X10 come with a transducer?
Yes. The XM 14 HW CMSI T transom mount transducer is included, so you don't have to buy one separately to get sonar running.
How big is the screen and what's the resolution?
The display measures 10 inches diagonally and uses a color TFT panel with a 1280 x 800 pixel matrix.
What sonar types does the X10 support?
Standard sonar includes Dual Spectrum CHIRP, MEGA Down Imaging+, and MEGA Side Imaging+. Supported frequencies include 50, 83, 200, 455, and 800 kHz, plus HW DSC CHIRP and MEGA.
How deep and how far can it see?
With the standard transducer, depth reads to 600 feet, and an optional CHIRP transducer extends that to 3,500 feet. Down Imaging reaches 400 feet at 455 kHz and 200 feet in MEGA. Side Imaging covers 800 feet side to side at 455 kHz and 400 feet in MEGA.
Can I control it with the touchscreen and the keypad?
Yes. It has both a touchscreen and a keypad with view preset keys, so you can use whichever suits the conditions. The touchscreen responds in wet conditions.
Does it work with Minn Kota trolling motors and Talon anchors?
It's designed to work with the Minn Kota system. Features like Draw and Navigate and Intelligent Depth Control work with compatible motors, and the unit is compatible with Talon shallow water anchors. Check your motor model for feature support.
Does the X10 have built-in GPS and maps?
Yes. It has an internal GPS receiver, chartplotting, and trackplotting. Minn Kota Maps are included, and AutoChart Live lets you create your own maps with 8 hours of built-in recording time.
Can I add Live Sonar or radar?
Yes. The X10 is compatible with Live Sonar in Forward, Down, or Landscape Mode, and with radar, through Ethernet networking. Live Sonar and radar are sold separately.
What networking does it have?
The X10 has NMEA 2000, Ethernet, Bluetooth, and Wi-Fi. It's also compatible with a 5-port Ethernet switch, and AIS is optional.
How much power does it draw?
It draws 2.2 amps and accepts 10.8 to 20 VDC input.
Do I need an external GPS antenna?
Not for normal use, since the GPS receiver is internal. If you mount the unit in-dash, the manufacturer says an external GPS antenna is required, and it's sold separately.
What's the warranty?
Minn Kota provides a 2 year limited warranty, extended to 3 years with product registration.